(!)[Please update your OS version] Windows 7 users will be excluded from the recommended environment from 15 December 2019 onwards due to the end of support for Windows 7.

  • Due to Corona virus (2019-nCoV) outbreak, some suppliers must stop operation to follow additional precautionary measures until further notice. Some products delivery may be delay. Masks and other sanitary related products are suspended. Apologize for any inconvenience caused.

Welded Mounting Plate, Brackets - L Type

Welded Mounting Plate, Brackets - L Type

"These Welded Brackets contain Gussets for improvement in strength and thus, can serve as the mounting bracket for large size motor cylinders or as the pedestal for heavy load."

Welded Mounting Plates/Brackets/L-Shaped:Related Image
Welded Mounting Plates/Brackets/L-Shaped:Related Image

Part Number[ M ]Material[ S ]Surface Treatment
 TypeMaterial Symbol
Blank Type Single Gusset
WAS

2 Bottom Hole Type
Single Gusset
WASBD
WASCD
WASMD
4 Bottom Hole Type Single Gusset
WASBF
WASCF
WASMF
Slotted Bottom Hole Type
Single Gusset
WASBN
WASCN

WASMN
SBSS400-
SBBBlack Oxide
SBMElectroless Nickel Plating
ABA5052-
ABWAnodize (Clear)
ABBAnodize (Black)
SUBSUS304-
[ ! ]Shot Blasted

Specifications

Part Number-T-A-B-L-Y-H-F-G-E-Q-D-Hole Specification
①Code, Nominal
Value
-V-S-W-Hole Specification
②Code, Nominal
Value
-K
       
Type Front Config. Bottom Config.-Material Symbol
WAS    -SB-T10-A150-B60-L80-Y120                        
WAS B D-SBB-T10-A150-B60-L80-Y120-H50-F50-G50      -N6-V60-S20  -NA6  
Part NumberTExternal Dims. Specify 1mm IncrementHFGEQDHole Specification①VSWHole Specification②K
TypeFront Config.Bottom Config.Material SymbolABLYCodeNominal Dia.CodeNominal Dia.
Single Gusset
WAS
Mounting Type
B
Cylinder Mounting Type
C
Motor Mounting Type
M
Single Gusset
D (2 Hole Mounting Type)
F (4 Hole Mounting Type)
N (Slotted Hole Mounting Type)
SB
SBB
SBM
AB
ABW
ABB
SUB
(8)
10
14
17
20
[ ! ](8) Applies to SS400 only
50~30040~15040~20030~290
[ ! ]Y>Tx2
[ ! ]For A>150, Y≥A/2
Specify 0.1mm Increment3~30
(0.5mm Increment)
31~100 (1mm Increment)
M
N
[ ! ]
Z
[ ! ]
ZB
[ ! ]
0
(No Hole)
3
4
5
6
8
10
12
16
Specify 0.1mm
Increment
MA
NA
[ ! ]
ZBA
[ ! ]
0
(No Hole)
3
4
5
6
8
10
12
Specify 0.1mm Increment
[ ! ]K≤NAx5
[ ! ]For the machining dimensions, see Hole Type Selection Chart
[Type Selection Method]
①Select Gusset shape. (Single or Double) ••••• Example shown is with Single Gusset. WAS
②Select front hole shape. ••••••••••••••••••••••• Example shows Mounting Type B
③Select Bottom mounting hole qty. or hole type. •••• Example shows 2 Mounting holes. D

Alterations

Welded Mounting Plates/Brackets/L-Shaped:Related Image

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...
Part Number
WAS-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-AB-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-AB-T20-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-ABB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-ABB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-ABB-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-ABB-T20-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-ABW-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-ABW-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-ABW-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-ABW-T20-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SB-T8-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SB-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SB-T20-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SBB-T8-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SBB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SBB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SBB-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SBB-T20-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SBM-T8-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SBM-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SBM-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SBM-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SBM-T20-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SUB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SUB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SUB-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SUB-T20-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-M[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-MA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-M[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-NA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-M[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-ZBA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-N[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-MA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-N[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-NA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-N[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-ZBA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-Z[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-MA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-Z[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-NA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-Z[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-ZBA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-ZB[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-MA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-ZB[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-NA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-ZB[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-ZBA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-M[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-MA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-M[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-NA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-M[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-ZBA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-N[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-MA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-N[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-NA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-N[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-ZBA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-Z[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-MA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-Z[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-NA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-Z[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-ZBA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-ZB[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-MA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-ZB[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-NA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-ZB[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-ZBA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-M[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-MA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-M[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-NA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-M[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-ZBA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-N[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-MA[0,​3,​4,​5,​6,​8,​10,​12]
WASBD-AB-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-N[0,​3,​4,​5,​6,​8,​10,​12,​16]-V[0-200/0.1]-S[0-150/0.1]-NA[0,​3,​4,​5,​6,​8,​10,​12]
Part NumberVolume DiscountDays to ShipRoHSFront Shape Bottom Surface Shape Type Material Surface Treatment Thickness T D Hole tolerance change (H7) [DC] (Hole Dia. Configurable)
(mm)
E
(mm)
External Dimension A
(mm)
External Dimension B
(mm)
External Dimension L
(mm)
F
(mm)
G
(mm)
H
(mm)
Hole Configurable 1, Counterbored Hole (Back) [ZB] Hole Configurable 1, Counterbored Hole (Front) [Z] Hole Configurable 1, Screw Through Hole Nominal Dia. Selection [N] Hole Configurable 1, Tapped Hole [M]
(mm)
Hole Configurable 2, Counterbored Hole (Back) [ZBA] Hole Configurable 2, Screw Through Hole Nominal Dia. Selection [NA] Hole Configurable 2, Tapped Hole [MA]
(mm)
K
(mm)
Q
(mm)
S
(mm)
Through Hole Dia. D
(mm)
V
(mm)
W
(mm)
Y
(mm)
6 Day(s) or more 10No HoleNo HoleWASA5052Not Provided10--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
6 Day(s) or more 10No HoleNo HoleWASA5052Not Provided14--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
6 Day(s) or more 10No HoleNo HoleWASA5052Not Provided17--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
6 Day(s) or more 10No HoleNo HoleWASA5052Not Provided20--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
9 Day(s) or more 10No HoleNo HoleWASA5052Clear Anodized (Black)10--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
9 Day(s) or more 10No HoleNo HoleWASA5052Clear Anodized (Black)14--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
9 Day(s) or more 10No HoleNo HoleWASA5052Clear Anodized (Black)17--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
9 Day(s) or more 10No HoleNo HoleWASA5052Clear Anodized (Black)20--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
9 Day(s) or more 10No HoleNo HoleWASA5052Clear Anodized (White)10--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
9 Day(s) or more 10No HoleNo HoleWASA5052Clear Anodized (White)14--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
9 Day(s) or more 10No HoleNo HoleWASA5052Clear Anodized (White)17--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
9 Day(s) or more 10No HoleNo HoleWASA5052Clear Anodized (White)20--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
6 Day(s) or more 10No HoleNo HoleWASSS400Not Provided8--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
6 Day(s) or more 10No HoleNo HoleWASSS400Not Provided10--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
6 Day(s) or more 10No HoleNo HoleWASSS400Not Provided14--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
6 Day(s) or more 10No HoleNo HoleWASSS400Not Provided17--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
6 Day(s) or more 10No HoleNo HoleWASSS400Not Provided20--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
9 Day(s) or more 10No HoleNo HoleWASSS400Black Oxide8--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
9 Day(s) or more 10No HoleNo HoleWASSS400Black Oxide10--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
9 Day(s) or more 10No HoleNo HoleWASSS400Black Oxide14--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
9 Day(s) or more 10No HoleNo HoleWASSS400Black Oxide17--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
9 Day(s) or more 10No HoleNo HoleWASSS400Black Oxide20--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
9 Day(s) or more 10No HoleNo HoleWASSS400Electroless Nickel Plating8--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
9 Day(s) or more 10No HoleNo HoleWASSS400Electroless Nickel Plating10--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
9 Day(s) or more 10No HoleNo HoleWASSS400Electroless Nickel Plating14--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
9 Day(s) or more 10No HoleNo HoleWASSS400Electroless Nickel Plating17--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
9 Day(s) or more 10No HoleNo HoleWASSS400Electroless Nickel Plating20--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
6 Day(s) or more 10No HoleNo HoleWASSUS304Not Provided10--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
6 Day(s) or more 10No HoleNo HoleWASSUS304Not Provided14--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
6 Day(s) or more 10No HoleNo HoleWASSUS304Not Provided17--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
6 Day(s) or more 10No HoleNo HoleWASSUS304Not Provided20--50 ~ 30040 ~ 15040 ~ 200----------------30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided10--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300---0 ~ 16--0 ~ 12--0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided10--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300---0 ~ 16-0 ~ 12---0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided10--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300---0 ~ 160 ~ 12----0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided10--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300--0 ~ 16---0 ~ 12--0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided10--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300--0 ~ 16--0 ~ 12---0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided10--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300--0 ~ 16-0 ~ 12----0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided10--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300-0 ~ 16----0 ~ 12--0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided10--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300-0 ~ 16---0 ~ 12---0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided10--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300-0 ~ 16--0 ~ 12----0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided10--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 3000 ~ 16-----0 ~ 12--0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided10--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 3000 ~ 16----0 ~ 12---0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided10--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 3000 ~ 16---0 ~ 12----0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided14--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300---0 ~ 16--0 ~ 12--0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided14--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300---0 ~ 16-0 ~ 12---0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided14--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300---0 ~ 160 ~ 12----0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided14--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300--0 ~ 16---0 ~ 12--0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided14--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300--0 ~ 16--0 ~ 12---0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided14--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300--0 ~ 16-0 ~ 12----0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided14--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300-0 ~ 16----0 ~ 12--0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided14--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300-0 ~ 16---0 ~ 12---0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided14--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300-0 ~ 16--0 ~ 12----0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided14--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 3000 ~ 16-----0 ~ 12--0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided14--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 3000 ~ 16----0 ~ 12---0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided14--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 3000 ~ 16---0 ~ 12----0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided17--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300---0 ~ 16--0 ~ 12--0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided17--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300---0 ~ 16-0 ~ 12---0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided17--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300---0 ~ 160 ~ 12----0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided17--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300--0 ~ 16---0 ~ 12--0 ~ 150-0 ~ 200-30 ~ 290
6 Day(s) or more 104-Hole2-HoleWASBDA5052Not Provided17--50 ~ 30040 ~ 15040 ~ 2000 ~ 2000 ~ 3000 ~ 300--0 ~ 16--0 ~ 12---0 ~ 150-0 ~ 200-30 ~ 290

Loading...

Example

Welded Mounting Plates/Brackets/L-Shaped:Related Image
 

Basic Information

Gusset Type Single Gusset Type Welding Type

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)