• Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 to 22:00 (MYT) 27/10/2019. We apologize for the inconvenience.

[Motorized] High Precision XY-Axis - Cross Roller

[Motorized] High Precision XY-Axis - Cross Roller

XY-Axis Stage excellent in compactness and accuracy.

[ M ] Material: Aluminum Alloy
[ S ] Surface Treatment: Black Anodize
[ A ] Accessory: SCB4-16 (4 pcs.)


Part Number-Sensor-Motor-Cable
Part NumberSensorMotorCableMechanical StandardsAccuracy Standards *1
TypeNo.Cover PositionStage Surface (mm)Travel Distance (mm)Weight (kg)Unidirectional Positioning AccuracyPitchingYawing
(Cable not included (separately sold))
60×70301.15µm or less / Full Stroke25'' or less20'' or less
*1. The above accuracy standards of Unidirectional Positioning Accuracy are for a single axis.

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Part Number
Part NumberVolume DiscountDays to ShipMotor, Motor Characteristics Resolution
Maximum Velocity
Table Straightness
9 Day(s) or more 5-Phase Stepping Motor2µm203L
9 Day(s) or more 38 Micro Step Motor1µm203L
9 Day(s) or more 5-Phase Stepping Motor2µm203R
9 Day(s) or more 38 Micro Step Motor1µm203R


  1. 1

More Information

[Motorized] XY-Axis - Cross Roller:Related Image
[Motorized] XY-Axis - Cross Roller:Related Image
[Motorized] XY-Axis - Cross Roller:Related Image
[Motorized] XY-Axis - Cross Roller:Related Image
■Common Specifications
Feed ScrewBall Screw Ø8, Lead 1
GuideCross Roller Guide
Resolution *2Full2µm(1µm)*3
Fine Feed (upon 1/20 partitioned)0.05µm
Max. Speed *420mm/sec
Positioning repeatabilityWithin ±0.3µm
Load Capacity44.1N
Lost Motion1µm or less
Backlash0.5µm or less
Straightness3µm or less
Parallelism30µm or less
Motion Parallelism10µm or less
*2. This represents the travel distance of stage per one pulse signal.
*3. The values in ( ) are for Motor Option MS (Micro Step).
*4. This represents the max. speed that can be driven by the recommended controller switched to Full Step mode, with the max. load applied.
(The value differs depending on the current driving controller and the current load.)
The value differs depending on the motor option.
[ ! ]The above specifications table is for a single axis stage placed flatly.
■Electrical Specifications
Part NumberCMS
MotorType5-Phase Stepping Motor 0.75A/Phase (Oriental Motor Co., Ltd.)
Part NumberC005C-90215P-1(□28mm)C7214-9015-1(38mm)
Step Angle0.72°0.36°
Driver Part Number-
ConnectorPart NumberHR10A-10J-12P (73) (Hirose Electric Co., LTD.)
Applicable Receptacle ConnectorHR10A-10P-12S (73) (Hirose Electric Co., LTD.)
Contact Part Number-
Applicable Receptacle Contact Part Number-
SensorLimit SensorProvided
Slit Home Origin SensorProvided
Home Sensor-
Part NumberPhoto Sensor PM-L25 (Panasonic Industrial Devices SUNX Co., Ltd.)
Power Supply VoltageDC5~24V or less ±10%
Current Consumption45mA or less (15mA or less per Sensor)
Control OutputNPN Open Collector Output DC30V or less, 50mA or less
Residual Voltage 2V or less (when load current is 50mA)
Residual Voltage 1V or less (when load current is 16mA)
Output LogicDetecting (Dark): Output Transistor OFF (Non-Conducting)
[ ! ]Sensors with Part Number PM-□24 are to be discontinued and replaced by next-generation products with Part Number PM-□25 from April 2017.

Basic Information

Type XY-Axis Motorized Stage Material Aluminum Guide Cross Roller
Table Feeding Method Ball Screw Table Length(mm) 70 Table Width(mm) 60
Stroke (X Distance)(mm) 30 Stroke (Y Distance)(mm) 30 Surface Treatment Black Anodize
Through Hole (Table Center Hole) Not Provided Load Capacity (Range)(N) 30.1~50 Load Capacity(N) 44.1
Positioning Accuracy(µm) 5 Sensor Limit + Home Cable Cable not included
Lead 1

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support