[Motorized] High Precision Z-Axis - Cross Roller

[Motorized] High Precision Z-Axis - Cross Roller

Z-Axis Stage excellent in lightweight, compactness and accuracy.

[Motorized] Z-Axis - Cross Roller:Related Image
 
[ M ] Material: Aluminum Alloy
[ S ] Surface Treatment: Black Anodize
[ A ] Accessory: SCB4-16 (4 pcs.)

Specifications

Part Number-Sensor-Motor-Cable
ZMPG730
ZMPG730
-
-
L
R
-
-
C
MS
-
-
N
N
Part NumberSensorMotorCableMechanical StandardsAccuracy Standards *1
TypeNo.Cover PositionStage Surface (mm)Travel Distance (mm)Weight (kg)Unidirectional Positioning AccuracyPitchingYawing
ZMPG730L
(Standard)
R
(Reversed)
C
(Standard)
N
(Cable not included (separately sold))
60×70300.95µm or less / Full Stroke25''
or less
20''
or less
MS
(Resolution(0.36°))
1.1
*1. The above accuracy standards of Unidirectional Positioning Accuracy are for a single axis.

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...
Part Number
ZMPG730-L-C-N
ZMPG730-L-MS-N
ZMPG730-R-C-N
ZMPG730-R-MS-N
Part NumberVolume DiscountDays to ShipRoHSMotor, Motor Characteristics Resolution
(µm)
Maximum Velocity
(mm/sec)
Table Straightness
(µm)
Sensor
9 Day(s) or more 105-Phase Stepping Motor2µm203L
9 Day(s) or more 1038 Micro Step Motor1µm203L
9 Day(s) or more 105-Phase Stepping Motor2µm203R
9 Day(s) or more 1038 Micro Step Motor1µm203R

Loading...

  1. 1

More Information

[Motorized] Z-Axis - Cross Roller:Related Image
[Motorized] Z-Axis - Cross Roller:Related Image
■Common Specifications
Feed ScrewBall Screw Ø8, Lead 1
GuideCross Roller Guide
Resolution *2Full2µm (1µm)*3
Half1µm(0.5µm)*3
Fine Feed (upon 1/20 partitioned)0.05µm
Max. Speed *420mm/sec
Positioning repeatabilityWithin ±0.3µm
Load Capacity29.4N
Lost Motion1µm or less
Backlash0.5µm or less
Straightness3µm or less
Parallelism30µm or less
Motion Parallelism10µm or less
*2. This represents the travel distance of stage per one pulse signal.
*3. The values in ( ) are for Motor Option MS (Micro Step).
*4. This represents the max. speed that can be driven by the recommended controller switched to Full Step mode, with the max. load applied.
(The value differs depending on the current driving controller and the current load.)
The value differs depending on the motor option.
[ ! ]The above specifications table is for a single axis stage placed flatly.
■Electrical Specifications
Part NumberCMS
StandardResolution(0.36°)
MotorType5-Phase Stepping Motor 0.75A/Phase (Oriental Motor Co., Ltd.)
Part NumberC005C-90215P-1(□28mm)C7214-9015-1(□38mm)
Step Angle0.72°0.36°
Driver Part Number-
ConnectorPart NumberHR10A-10J-12P (73) (Hirose Electric Co., LTD.)
Applicable Receptacle ConnectorHR10A-10P-12S (73) (Hirose Electric Co., LTD.)
Contact Part Number-
Applicable Receptacle Contact Part Number-
SensorLimit SensorProvided
Slit Home Origin SensorProvided
Home Sensor-
Part NumberPhotomicrosensor: PM-L25 (Panasonic Industrial Devices SUNX Co., Ltd.)
Power Supply VoltageDC5~24V or less ±10%
Current Consumption45mA or less (15mA or less per Sensor)
Control OutputNPN Open Collector Output DC30V or less, 50mA or less
Residual Voltage 2V or less (when load current is 50mA)
Residual Voltage 1V or less (when load current is 16mA)
Output LogicDetecting (Dark): Output Transistor OFF (Non-Conducting)
[ ! ]Sensors with Part Number PM-□24 are to be discontinued and replaced by next-generation products with Part Number PM-□25 from April 2017.
 

Basic Information

Type Z-Axis Motorized Stage Material Aluminum Guide Cross Roller
Table Feeding Method Ball Screw Table Length(mm) 70 Table Width(mm) 60
Stroke (Z Distance)(mm) 30 Surface Treatment Black Anodize Through Hole (Table Center Hole) Not Provided
Load Capacity (Range)(N) 5~30 Load Capacity(N) 29.4 Positioning Accuracy(µm) 5
Sensor Limit + Home Cable Cable not included

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support