Economy Type Post-Assembly Insertion Screws for 6 (Slot Width 8mm) Aluminum Frames

Brand :

MISUMI

Caution

Product Description

Economy type post-assembly insertion screws for 6 Series aluminum extrusions.

Dimensional Drawing of Nuts

■ Post-insertion Nuts: Effective length of the Nuts

HATL6-6

Aluminum frame groove

[M] Material: SWRCH35K (carbon steel wire) [S] Surface treatment: trivalent chromate
*with conductive function

Specification Table of Nuts

Nuts Model	−	L
HATL6-6	−	17

・The price list below is currentas of April 2011.
・To check the latest price, please click the "Check Price" button after confirming the model number.

Nuts Model	L	H	Compatible Frames (Series)	Reference tightening torque (N・m)
HATL6-6	13	12.0	6 Series	11.7
	17	17.0
	twenty two	22.0

Specifications/Overview of Nuts

This product is a Nuts integrated with a Nuts, reducing the amount of work required to tighten the Nuts.
Economy post-insertion Nuts are approximately 50% cheaper thanconventional products (HATLSN) due to changes in material. They can be purchased at low cost.

■ What is conductive function?

The conductive Nuts has a protrusion.
When installed, the protrusions peel off the anodized coating on the aluminum frame, making it conductive.

How to Use of Nuts

This product is a post-insertion Nuts. It can be installed from the groove after assembly.
The Nuts can be seen even after being inserted into the frame groove, making it easy to position them with the joining parts and connect the brackets.

6 Series (groove width 8 mm) Economy post-insertion Nuts for 30/60 square aluminum frames Related image 1_Example of use

Selection Support Information of Nuts

■ Compatible series

This product is compatible withMisumi 6 series (slot width 8 mm) aluminum frames.

6 Series

■ Difference between first-in and last-in

・MISUMI aluminum frame Nuts are available in a variety of types, including first-in and last-in. Use them according to your needs.
First-in: Install from the groove end face before assembly. They are wide and have little play inside the groove, making Nuts tightening easy.

6 Series (groove width 8 mm) Economy post-insertion Nuts for 30/60 square aluminum frames Related image 1_Difference between first-insertion and post-insertion

Post-insertion: The Nuts Can be installed through the groove after assembly.

6 Series (groove width 8 mm) Economy post-insertion Nuts for 30/60 square aluminum frames Related image 2_Difference between first-insertion and post-insertion

■ If the aluminum frame becomes stuck and cannot be removed

To remove the Nuts, hook the hex wrench into the hole in the Nuts and turn it at right angles to the groove.

6 Series related parts of Nuts

Product name	Aluminum frame	bracket	Blind Joint	Frame cap	Groove cover
photograph
Product page	Here	Here	Here	Here	Here