Economy Type Post-Assembly Insertion Screws for 8 (Slot Width 10mm) Aluminum Frames

Brand :

MISUMI

Caution

Product Description

Economy type post-assembly insertion screws for 8 Series aluminum extrusions.

Dimensional Drawing of Nuts

■ Post-insertion Nuts: Effective length of the Nuts

HATL8-8

Aluminum frame groove

Economy post-insertion Nuts for 8 series (slot width 10 mm) aluminum frames: Related images

[M] Nuts Material: SWRCH35K (carbon steel wire) [S] Surface treatment: trivalent chromate

Specification Table of Nuts

Nuts Model	−	L
HATL8-8	−	20

・The price list below is currentas of April 2011.
・To check the latest price, please click the "Check Price" button after confirming the model number.

Nuts Model	L	H	Compatible Frames (Series)	Reference tightening torque (N・m)
HATL8-8	20	17.0	8 Series 8-45 Series	23.5
HATL8-8	twenty five	22.0	8 Series 8-45 Series	23.5

*With conductive function

Specifications/Overview of Nuts

This product is a Nuts integrated with a Nuts, reducing the amount of work required to tighten the Nuts.
Economy post-insertion Nuts are approximately 50% cheaper thanconventional products (HATLSN) due to changes in material. They can be purchased at low cost.

■ What is conductive function?

The conductive Nuts has a protrusion.
When installed, the protrusions peel off the anodized coating on the aluminum frame, making it conductive.

How to Use of Nuts

This product is a post-insertion Nuts. It can be installed from the groove after assembly.
The Nuts can be seen even after being inserted into the frame groove, making it easy to position them with the joining parts and connect the brackets.

8 Series (10mm groove width) Economy post-insertion Nuts for aluminum frames Related image 1_Example of use

Selection Support Information of Nuts

■ Compatible series

This Nuts product is compatible withMisumi 8 series (slot width 10 mm)andMisumi 8-45 series (slot width 10 mm) aluminum frames.

8 Series

8-45 Series

Economy post-insertion Nuts for 8 series (groove width 10 mm) aluminum frames Related image 2_Compatible series

■ Difference between first-in and last-in

・MISUMI aluminum frame Nuts are available in a variety of types, including first-in and last-in. Use them according to your needs.
First-in: Install from the groove end face before assembly. They are wide and have little play inside the groove, making Nuts tightening easy.

8 Series (10mm groove width) Economy post-insertion Nuts for aluminum frames Related image 1_Difference between first-insertion and post-insertion

Post-insertion: Can be installed through the groove after assembly.

8 Series (10mm groove width) Economy post-insertion Nuts for aluminum frames Related image 2_Difference between first-insertion and post-insertion

■ If the aluminum frame becomes stuck and cannot be removed

To remove the Nuts, hook the hex wrench into the hole in the Nuts and turn it at right angles to the groove.

Related Parts of Nuts

Product name	Aluminum frame	bracket	Blind Joint	Frame cap	Groove cover
photograph
8 Series	Here	Here	Here	Here	Here
8-45 Series	Here	Here	Here	Here	Here