[Motorized] X-Axis - Cross Roller
Brand :
MISUMI
Caution
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Product Description
[Features]This is a lightweight, compact, high-precision automatic X-axis stage. The stroke is 30 mm.
[ M ] Material: Aluminum Alloy
[ S ] Surface Treatment: Black Anodize
[ A ] Accessory: SCB4-16 (4 pcs.)
[ S ] Surface Treatment: Black Anodize
[ A ] Accessory: SCB4-16 (4 pcs.)
More Information
![[Motorized] X-Axis - Cross Roller:Related Image](http://my.misumi-ec.com/linked/item/10303066030/img/oth_11.gif)
![[Motorized] X-Axis - Cross Roller:Related Image](http://my.misumi-ec.com/linked/item/10303066030/img/oth_12.gif)
![[Motorized] X-Axis - Cross Roller:Related Image](http://my.misumi-ec.com/linked/item/10303066030/img/oth_10.gif)
■Motor/Cable Application Table
| Motor | Cable |
| C.MS | N |
| PA | 2A,5A,2R,5R |
| QA | 2A,5A,2R,5R |
■Common Specifications
*2. This represents the travel distance of stage per one pulse signal.
*3. The values in ( ) are for Motor Option MS.
*4. This represents the max. speed that can be driven by the recommended controller switched to Full Step mode, with the max. load applied.
(The value differs depending on the current driving controller and the current load.)
The value differs depending on the motor option.
| Feed Screw | Ball Screw Ø8, Lead 1 | |
| Guide | Cross Roller Guide | |
| Resolution *2 | Full | 2µm(1µm)*3 |
| Half | 1µm(0.5µm)*3 | |
| Fine Feed (upon 1/20 partitioned) | 0.05µm | |
| Max. Speed *4 | 20mm/sec | |
| Positioning repeatability | Within ±0.2µm | |
| Load Capacity | 49N | |
| Lost Motion | 1µm or less | |
| Backlash | 0.5µm or less | |
| Straightness | 3µm or less | |
| Parallelism | 30µm or less | |
| Motion Parallelism | 10µm or less | |
*3. The values in ( ) are for Motor Option MS.
*4. This represents the max. speed that can be driven by the recommended controller switched to Full Step mode, with the max. load applied.
(The value differs depending on the current driving controller and the current load.)
The value differs depending on the motor option.
■Electrical Specifications
[ ! ]Sensors with Part Number PM-□24 are to be discontinued and replaced by next-generation products with Part Number PM-□25 from April 2017.
| Part Number | C | MS | PA | QA | |
| Standard | Resolution(0.36°) | □28 α-Step | □42 α-Steps | ||
| Motor | Type | 5-Phase Stepping Motor 0.75A/Phase (Oriental Motor Co., Ltd.) | α-Step Motor (Oriental Motor Co., Ltd.) | ||
| Part Number | C005C-90215P-1(□28mm) | C7214-9015-1(□38mm) | ARM24SAK(□28mm) | ARM46AC(□42mm) | |
| Step Angle | 0.72° | 0.36° | 0.36° (When 1000P/R is set) | ||
| Driver Part Number | - | ARD-K | ARD-A | ||
| Connector | Part Number | HR10A-10P-12P (73) (Hirose Electric Co., LTD.) | 172211-6 (Tyco Electronics Japan G.K.) | ||
| Applicable Receptacle Connector | HR10A-10P-12S (73) (Hirose Electric Co., LTD.) | 171822-6 (Tyco Electronics Japan G.K.) | |||
| Contact Part Number | - | 170430-1 (Tyco Electronics Japan G.K.) | |||
| Applicable Receptacle Contact Part Number | - | 170205-1 (Tyco Electronics Japan G.K.) | |||
| Sensor | Limit Sensor | Provided | |||
| Slit Home Origin Sensor | Provided | ||||
| Home Sensor | - | ||||
| Part Number | Photo Micro Sensor PM-L25 (Panasonic Industrial Devices SUNX Co., Ltd.) | ||||
| Power Supply Voltage | DC5~24V or less ±10% | ||||
| Current Consumption | 45mA or less (15mA or less per Sensor) | ||||
| Control Output | NPN Open Collector Output DC30V or less, 50mA or less Residual Voltage 2V or less (when load current is 50mA) Residual Voltage 1V or less (when load current is 16mA) | ||||
| Output Logic | Detecting (Dark): Output Transistor OFF (Non-Conducting) | ||||