[Motorized] X-Axis - Cross Roller (XMPG730-R-QA-2R)

[Motorized] X-Axis - Cross Roller XMPG730-R-QA-2R

X-Axis Stage excellent in lightweight, compactness and accuracy.



 
[ M ] Material: Aluminum Alloy
[ S ] Surface Treatment: Black Anodize
[ A ] Accessory: SCB4-16 (4 pcs.)

Specifications

Part Number-Sensor-Motor-Cable
XMPG730
XMPG730
-
-
L
R
-
-
C
QA
-
-
N
N
Part NumberSensorMotorCableMechanical StandardsAccuracy Standards *1
TypeNo.Cover PositionStage Surface (mm)Travel Distance (mm)Weight (kg)Unidirectional Positioning AccuracyMoment Rigidity ("/N•cm)PitchingYawing
PitchingYawingRolling
XMPG730L(Standard)R(Reversed)C
(Standard)
N
(Cable not included (separately sold))
2A
(2m, α-Step)
5A
(5m, α-Step)
2R
(Robot Cable 2m, α-Step)
5R
(Robot Cable 5m, α-Step)
For combination of motors and cables, see the table below.
60×70300.65µm or less /
Full Stroke
0.150.080.0725'' or less20'' or less
MS
(Resolution(0.36°))
0.7
PA
(□28 α-Step)
0.6
QA
(□42 α-Steps)
1.0
*1. The above accuracy standards of Unidirectional Positioning Accuracy and Moment Rigidity are for a single axis.

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...
Part Number
XMPG730-R-QA-2R
Part NumberVolume DiscountDays to ShipRoHSMotor, Motor Characteristics Resolution
(µm)
Maximum Speed
(mm/sec)
Table Straightness
(µm)
Table Parallelism
(µm)
Moment Rigidity (Pitching)
("/N•cm)
Moment Rigidity (Yawing)
("/N•cm)
Moment Rigidity (Rolling)
("/N•cm)
Sensor Cable
9 Day(s) or more 10[α-Step Motor] 42α-Step Motor1µm203300.150.080.07RRobot Cable 2m, α-Step

Loading...

  1. 1

More Information

[Motorized] X-Axis - Cross Roller:Related Image
[Motorized] X-Axis - Cross Roller:Related Image
[Motorized] X-Axis - Cross Roller:Related Image
■Motor/Cable Application Table
MotorCable
C.MSN
PA2A,5A,2R,5R
QA2A,5A,2R,5R
■Common Specifications
Feed ScrewBall Screw Ø8, Lead 1
GuideCross Roller Guide
Resolution *2Full2µm(1µm)*3
Half1µm(0.5µm)*3
Fine Feed (upon 1/20 partitioned)0.05µm
Max. Speed *420mm/sec
Positioning repeatabilityWithin ±0.3µm
Load Capacity49N
Lost Motion1µm or less
Backlash0.5µm or less
Straightness3µm or less
Parallelism30µm or less
Motion Parallelism10µm or less
*2. This represents the travel distance of stage per one pulse signal.
*3. The values in ( ) are for Motor Option MS.
*4. This represents the max. speed that can be driven by the recommended controller switched to Full Step mode, with the max. load applied.
(The value differs depending on the current driving controller and the current load.)
The value differs depending on the motor option.
■Electrical Specifications
Part NumberCMSPAQA
StandardResolution(0.36°)□28 α-Step□42 α-Steps
MotorType5-Phase Stepping Motor 0.75A/Phase (Oriental Motor Co., Ltd.)α-Step Motor (Oriental Motor Co., Ltd.)
Part NumberC005C-90215P-1(□28mm)C7214-9015-1(□38mm)ARM24SAK(□28mm)ARM46AC(□42mm)
Step Angle0.72°0.36°0.36° (When 1000P/R is set)
Driver Part Number-ARD-KARD-A
ConnectorPart NumberHR10A-10P-12P (73) (Hirose Electric Co., LTD.)172211-6 (Tyco Electronics Japan G.K.)
Applicable Receptacle ConnectorHR10A-10P-12S (73) (Hirose Electric Co., LTD.)171822-6 (Tyco Electronics Japan G.K.)
Contact Part Number-170430-1 (Tyco Electronics Japan G.K.)
Applicable Receptacle Contact Part Number-170205-1 (Tyco Electronics Japan G.K.)
SensorLimit SensorProvided
Slit Home Origin SensorProvided
Home Sensor-
Part NumberPhoto Micro Sensor PM-L25 (Panasonic Industrial Devices SUNX Co., Ltd.)
Power Supply VoltageDC5~24V or less ±10%
Current Consumption45mA or less (15mA or less per Sensor)
Control OutputNPN Open Collector Output DC30V or less, 50mA or less
Residual Voltage 2V or less (when load current is 50mA)
Residual Voltage 1V or less (when load current is 16mA)
Output LogicDetecting (Dark): Output Transistor OFF (Non-Conducting)
[ ! ]Sensors with Part Number PM-□24 are to be discontinued and replaced by next-generation products with Part Number PM-□25 from April 2017.
 

Basic Information

Type X-Axis Motorized Stage Material Aluminum Guide Cross Roller
Table Feeding Method Ball Screw Table Length(mm) 70 Table Width(mm) 60
Stroke (X Distance)(mm) 30 Surface Treatment Black Anodize Through Hole (Table Center Hole) Not Provided
Load Capacity (Range)(N) 30.1~50 Load Capacity(N) 49 Positioning Accuracy(µm) 5
Sensor Limit + Home

Please check the type/dimensions/specifications of the part XMPG730-R-QA-2R in the [Motorized] X-Axis - Cross Roller series.

Products like this...

Part Number
XMPG730-L-MS-N
XMPG730-L-PA-2A
XMPG730-L-PA-2R
XMPG730-L-PA-5R
XMPG730-L-QA-2A
XMPG730-R-QA-5R
Part NumberVolume DiscountDays to ShipRoHSMotor, Motor Characteristics Resolution
(µm)
Maximum Speed
(mm/sec)
Table Straightness
(µm)
Table Parallelism
(µm)
Moment Rigidity (Pitching)
("/N•cm)
Moment Rigidity (Yawing)
("/N•cm)
Moment Rigidity (Rolling)
("/N•cm)
Sensor Cable
9 Day(s) or more 1038 Micro Step Motor1µm203300.150.080.07LN (No Cable, Cable Sold Separately)
9 Day(s) or more 10[α-Step Motor] 28α-Step Motor1µm203300.150.080.07L2m, α-Step
9 Day(s) or more 10[α-Step Motor] 28α-Step Motor1µm203300.150.080.07LRobot Cable 2m, α-Step
9 Day(s) or more 10[α-Step Motor] 28α-Step Motor1µm203300.150.080.07LRobot Cable 5m, α-Step
9 Day(s) or more 10[α-Step Motor] 42α-Step Motor1µm203300.150.080.07L2m, α-Step
9 Day(s) or more 10[α-Step Motor] 42α-Step Motor1µm203300.150.080.07RRobot Cable 5m, α-Step

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support