Blind Joint Parts - Nut for Pre-Assembly Double Joint (Series 6)

Brand :

MISUMI

Caution

Product Description

It is a pre-assembly insertion double joint kit and fastening product. This product is used with a pre-assembly insertion double joint.

Dimensional Drawing of Blind Joint Parts

HDJRN

[M] Blind Joint Parts Material:
SUS304

Specification Table of Blind Joint Parts

Model

HDJRN6

・The price list below is currentas of April 2011.
・To check the latest price, please click the "Check Price" button after confirming the model number.

Blind Joint Parts Model		Apply			Mass (g)
Blind Joint Parts Type	No.	Supported Frames	First-in double joint	bolt	Mass (g)
HDJRN	6	6 series 30 square	HDJFSN6	CBM5-40	43

How to connect of Blind Joint Parts

This Blind Joint Parts product is used together witha pre-inserted double joint .

[Method of adding additional work to the frame]

Example: When adding a 1000mm aluminum frame to a 4000mm aluminum frame with a cross section of 30x60

1. Drill S holes horizontally on the right side of the 4000mm aluminum frame.2
. Drill D holes horizontally on the left side of the 1000mm aluminum frame.3
. Prepare pre-fit double Blind Joint Parts for the number of S holes.4
. Prepare pre-fit double joint nuts for the number of D holes.5
. Prepare 2 hexagon socket bolts for the pre-fit double Blind Joint Parts.6
. Pass the bolt (5) through the pre-fit double joint (3).7.
Insert the head of the bolt (5) into the S hole, then insert (3) into the S hole.8.
Insert (4) into the D hole of the frame (2) so that the tap is level with the groove.9.
Fasten to (4) with the bolt installed in (7). Do this for the number of grooves on both sides.

6 Series (groove width 8 mm) Blind joint parts Pre-insertion double joint nut Related image 1_Connection method

series	symbol	Product name	Blind Joint Parts Model	quantity	remarks
6	(1)	30x60 Aluminum Frame S-Hole	HFS6-3060-4000-RSH	1	-
	(2)	30x60 Aluminum Frame D Hole	HFS6-3060-1000-LDH	1	-
	(3)	Single pre-inserted double Blind Joint Parts	HDJFSN6	2	2 pieces per set
	(4)	Pre-insertion double Blind Joint Parts nut	HDJRN6	2	-
	(5)	Hexagon socket head bolt	CBM5-40	4	-

How to Use of Blind Joint Parts

Example of connection with bent frame

Example of setting a frame on a plate

Blind Joint Parts Model		Frame used	M	P
Type	No.
HDJFSN	6	6 series 30 square	5	20.6
		6 series 50 square		40.6
		6 Series 60 Square		50.6
[ ! ]As long as the shape is the same, frames with different surface treatments and materials can be used.

Example of mounting to plate from below

(reference) Corner part when using this Blind Joint Parts

Product Comparison Information of Blind Joint Parts

■6 Series Blind Joint Parts

Product name	First-in double Blind Joint Parts	Tapping Blind Joint Parts	Screw Blind Joint Parts	Simple Blind Joint Parts	Single Blind Joint Parts	Center Blind Joint Parts	Post-insertion double Blind Joint Parts	Parallel Blind Joint Parts
Product name	First-in double Blind Joint Parts	Tapping Blind Joint Parts	Screw Blind Joint Parts	Simple Blind Joint Parts	Single Blind Joint Parts	Center Blind Joint Parts	Post-insertion double Blind Joint Parts	Parallel Blind Joint Parts
Product Photos
Installation Diagram
Blind Joint Parts Material	SUS316 equivalent / SUS304	SWCH-18A	Iron or SUS304	S45C/SCM435	Iron or SUS304	SCS13	Equivalent to SCS13/SUS304	SCS13/SUS304
Blind Joint Parts Material	SUS316 equivalent / SUS304	SWCH-18A	Iron or SUS304	S45C/SCM435	Iron or SUS304	SCS13	Equivalent to SCS13/SUS304	SCS13/SUS304
Features	This Blind Joint Parts can be used for a variety of purposes, such as extending frames or attaching to plates.	No additional tapping is required. Wrench holes are drilled into the mating frame. This is the most inexpensive Blind Joint Parts.	The plate allows for reliable and inexpensive connection.	No additional machining of wrench holes is required, and fastening can be done in one place.	Since the additional D hole does not penetrate all the way to the flat surface, this is a blind joint with particularly excellent aesthetics.	This is the most common blind joint that can be used with a wide range of aluminium frames.	Stable fastening is possible from two points. This is the strongest fastening possible with Blind Joint Parts.	The frames can be connected side-by-side.
6 Series Product Page	Product page	Product page	Product page	Product page	Product page	Product page	Product page	Product page

6 Series Related Products of Blind Joint Parts

■6 Series (groove width 8mm)

Product name	Aluminum frame	Blind Joint Parts	Frame cap	Groove cover	nut
photograph
Product page	Here	Here	Here	Here	Here