Blind Joint Components - Nuts for Pre-Assembly Insertion Double Joints Joint Nut for 8 Series (Slot Width 10mm) Aluminum Frames
Caution
Product Description
It is a pre-assembly insertion double joint kit and fastening product. This product is used with a pre-assembly insertion double joint.
Dimensional Drawing of Blind Joint Parts
[M] Material Blind Joint Parts:
SUS304
Specification Table of Blind Joint Parts
| Model Blind Joint Parts |
| HDJRN8 |
・To check the latest price, please click the "Check Price" button after confirming the model number.
| Model Blind Joint Parts | Apply | Mass (g) | |||
| Type | No. | Supported Frames | First-in double joint | bolt | |
| HDJRN | 8 | HFS8-4040 | HDJFSN8 | CBM6-50 | 52 |
How to Connect of Blind Joint Parts
Blind Joint Parts, This product is used together with a pre-inserted double joint .
[Method of adding additional work to the frame]
Example Blind Joint Parts: When adding a 1000mm aluminum frame to a 4000mm aluminum frame with a cross section of 30x60
1. Drill S holes horizontally on the right side of the 4000mm aluminum frame.2
. Drill D holes horizontally on the left side of the 1000mm aluminum frame.3
. Prepare pre-fit double joints for the number of S holes.4
. Prepare pre-fit double joint nuts for the number of D holes.5
. Prepare 2 hexagon socket bolts for the pre-fit double joint parts.6
. Pass the bolt (5) through the pre-fit double joint (3).7.
Insert the head of the bolt (5) into the S hole, then insert (3) into the S hole.8.
Insert (4) into the D hole of the frame (2) so that the tap is level with the groove.9.
Fasten to (4) with the bolt installed in (7). Do this for the number of grooves on both sides.
| series | symbol | Product name | Model | quantity | remarks |
|---|---|---|---|---|---|
| 8 | (1) | 40x80 Aluminum Frame S-Hole | HFS8-4080-4000-RSH | 1 | - |
| (2) | 40x80 Aluminum Frame D Hole | HFS8-4080-1000-LDH | 1 | - | |
| (3) | Single pre-inserted double joint | HDJFSN8 | 2 | 2 pieces per set | |
| (4) | Pre-insertion double joint nut | HDJRN8 | 2 | - | |
| (5) | Hexagon socket head bolt | CBM6-50 | 4 | - |
How to Use of Blind Joint Parts
Corner part when using this joint
Product Comparison Information of Blind Joint Parts
■8 Series Blind Joint Parts
| Product name | First-in double joint | Parallel Joint | Center Joint | Screw joint | Single Joint | Tapping Joint | Post-insertion double joint |
|---|---|---|---|---|---|---|---|
| Product Photos |  |  |  |  |  |  |  |
| Installation Diagram |  |  |  |  |  |  |  |
| Material Blind Joint Parts | SUS316 equivalent / SUS304 | SCS13/SUS304 | SCS13 | Iron or SUS304 | Iron or SUS304 | SWCH-18A | Equivalent to SCS13/SUS304 |
| Features Blind Joint Parts | This blind joint can be used for a variety of purposes, such as extending frames or attaching to plates. | The frames can be connected side-by-side. | This is the most common blind joint that can be used with a wide range of aluminium frames. | The plate allows for reliable and inexpensive connection. | Since the additional D hole does not penetrate all the way to the flat surface, this is a blind joint with particularly excellent aesthetics. | No additional tapping holes are required. This is the most inexpensive blind joint. | Stable fastening is possible from two points. This is the strongest fastening possible with blind joints. |
| 8 Series Product Page | Product page | Product page | Product page | Product page | Product page | Product page | Product page |
| Additional work required for the frame | S hole | L-hole | M hole | Tap holes and wrench holes | Wrench hole / D hole | Wrench Hole | M hole |
Related Items of Blind Joint Parts
■8 series (groove width 10mm) of Blind Joint Parts
| Product name | Aluminum frame | bracket | Frame cap | Groove cover | nut |
|---|---|---|---|---|---|
| photograph |  |  |  |  |  |
| Product page | Here | Here | Here | Here | Here |