Blind Joint Components - Parallel Joint Kits for 6 Series (Slot Width 8mm) Aluminum Frames

Brand :

MISUMI

Caution

Product Description

Frames can be connected horizontally with Parallel Joint Kits Post-assembly insertion type.

Dimensional Drawing of Blind Joint Parts

HLJ (Parallel joint kit, pre-insertion type) HALJ (Parallel joint kit, post-insertion type)

■ Blind Joint Parts guide	■Parallel Blind Joint Parts pre-inserted parallel post	Rear-insertion parallel post

Part Name	[M] Material Blind Joint Parts	[S] Surface Treatment
First-in parallel post	SCS13	−
Rear-insertion parallel post	SCS13
Joint Guide	SUS304
Set screw	SCM435	Black oxide coating

Specification Table of Blind Joint Parts

Model Blind Joint Parts

HLJ6

・The price list below is current as of April 2011.
・To check the latest price, please click the "Check Price" button after confirming the model number.

Model		accessories
Type	No.	①②Parallel Post	Quantity	③Joint guide	Quantity	④ Set screw	Quantity
HLJ first-in type	6	First-in parallel post 6	1	6	1	M6×12	1
HALJ Rear-insertion type	6	Rear-insertion parallel post 6	1	6	1	M6×12	1

■Frame compatible with this Blind Joint Parts

Compatible frame number				[Exception] Unusable frames
6−3030 ^*1	6−3060 ^*1	6−3090	6-30120	*1HFSH and HFSC cannot be used as L-hole machining is not possible.
6−5050	6−50100
6−6060	6−6090	6-60120

How to Connect of Blind Joint Parts

Additional work required for aluminum frame of Blind Joint Parts
L-hole processing

procedure	Front View	Side View	explanation
1			Blind Joint Parts, Attach the parallel post to frame A. (The post-insertion type can be inserted from the top of the groove while rotating.) *The parallel post is compatible with both the standard type and the type with anti-rotation function.
2			Insert the joint guide into the frame B with the L hole. Since it has a rotation stopper, there is no need to adjust the hole direction.
3			While passing the parallel post through the joint guide hole, bring frames Ⓐ and Ⓑ closer together.
4			Screw the set screw into the tap on the side of the joint guide.
5			By tightening the set screw and pressing it against the V-groove of the parallel post, frames A and B are fastened together by tension.

6 Series (groove width 8mm) Blind joint parts Parallel joint kit Related image 1_Connection method

Blind Joint Parts, How to use on a frame that has multiple rows of grooves on one surface.
Insert joint guides into both ends of the L-shaped hole and fasten using multiple parallel joints.
How to use on frames with 3 or more rows of grooves:
Only one row at each end will have an L-shaped hole. Please note that it cannot be used on the central rows.

6 Series (groove width 8mm) Blind joint parts Parallel joint kit Related image 2_Connection method

Blind Joint Parts, As long as the joints do not interfere with each other in the longitudinal direction, multiple joints can be connected.
Load-bearing data is not available. If strength is required, please use multiple fastenings.

6 Series Model Example	Frame A	Frame B	Parallel Joint
6 Series Model Example	HFS6-3030-300	HFS6-3030-300-JLP250-H2	HLJ6 x 2

Product Comparison Information of Blind Joint Parts

■6 Series Blind Joint Parts

Product name	Parallel Joint	Tapping Joint	Screw joint	Simple joint	Single Joint	Center Joint	Post-insertion double joint	First-in double joint
Product name	Parallel Joint	Tapping Joint	Screw joint	Simple joint	Single Joint	Center Joint	Post-insertion double joint	First-in double joint
Product Photos
Installation Diagram of Blind Joint Parts
Material	SCS13/SUS304	SWCH-18A	Iron or SUS304	S45C/SCM435	Iron or SUS304	SCS13	Equivalent to SCS13/SUS304	SUS316 equivalent / SUS304
Material	SCS13/SUS304	SWCH-18A	Iron or SUS304	S45C/SCM435	Iron or SUS304	SCS13	Equivalent to SCS13/SUS304	SUS316 equivalent / SUS304
Features Blind Joint Parts	The frames can be connected side-by-side.	No additional tapping is required. Wrench holes are drilled into the mating frame. This is the most inexpensive blind joint.	The plate allows for reliable and inexpensive connection.	No additional machining of wrench holes is required, and fastening can be done in one place.	Since the additional D hole does not penetrate all the way to the flat surface, this is a blind joint with particularly excellent aesthetics.	This is the most common blind joint that can be used with a wide range of aluminium frames.	Stable fastening is possible from two points. This is the strongest fastening possible with blind joints.	This blind joint can be used for a variety of purposes, such as extending frames or attaching to plates.
6 Series Product Page	Viewing	Product page	Product page	Product page	Product page	Product page	Product page	Product page
Additional work required of Blind Joint Partsfor the frame	L-hole	Wrench Hole	Tap holes and wrench holes	Tap hole drilling	Wrench hole / D hole	M hole	M hole	S hole

6 Series Related Products of Blind Joint Parts

■6 Series (groove width 8mm) of Blind Joint Parts

Product name	Aluminum frame	bracket	Frame cap	Groove cover	nut
photograph
Product page	Here	Here	Here	Here	Here