3030, Slot Width 8mm Aluminum Frames

Domestic universal European standard profile with 8 mm groove width and 3030 side length.
Aluminum profile for assembly lines is a structural material that takes advantage of the excellent workability of aluminum alloy, using molds to extrude cylindrical aluminum ingots into shape.
Widely used in assembly line workbenches, FA automation equipment frames, covers, display columns, carts, and other applications.
Suitable for structures such as small equipment hood, cabinet, and display column.
Standard and heavy-duty 4-sided groove, 2-side groove, and crowned type are available for selection.

1. Complies with the GB industrial aluminum profile standard, with 8 to 10μ clear anodized surface for scratch resistance.
2. A protective film is applied to the profile surface to prevent bumps and friction during transportation.
3. Free cutting to any specified length in 0.5 mm units within the range of 50 mm to 4000 mm.
4. Supports various alterations such as drilling and bevel cutting.
5. The European standard economy series profile product has a different profile cross-section shape compared to MISUMI's existing products. The specification comparison is as follows:

[Specification]
The specification table includes information such as the specified length range, unit, weight/meter, and inertial intercept.
  

Type ( Type)		Profile cross-section	Total length L		Profile type	Weight kg/m	Cross-sectional moment of inertia
Fixed type	Specified type		Fixed type	Specified type			Lx (cm4)	Ly (cm4)
KLCF8	LCF8	3030	4000	50–4000 (specified unit 0.5 mm)	Standard	0.83	2.86	2.85
KLCFB8	LCFB8				Black	0.87
KLCFS8	LCFS8				Sandblasting
KLCFW8	LCFW8				Heavy type	0.88	3.35	3.35
KLCFL8	LCFL8				Light type	0.66	1.67	1.67
KLCFLY8	LCFLY8				Yellow
-	LCFT8				2-side groove	0.98	2.98	2.98
KLCFF8	LCFF8				3-side groove	0.95	2.91	3.12
KLCFR8	LCFR8				Semicircular	0.92	2.52	2.52

Any length from 50 to 4000 mm can be freely cut in increments of the specified unit 0.5 mm at no additional charge.

1. The profile surface is covered with a protective film. Due to adhesion from the glue, a small amount of aluminum debris may remain. This is not a quality problem, and all aluminum debris will be removed once the protective film is taken off.
2. European standard aluminum alloy profiles and MISUMI's existing Japanese material aluminum profile accessories are not compatible. It is recommended to use the economical European standard accessories starting with 'L':

With the 3030 series profile, you can easily and simply assemble small frames, covers, racks, and other modules for automation equipment.