120120 , Slot Width 8mm Aluminum Frames

Brand :

MISUMI

Caution

Product Description

Product overview

European standard economy series new product, with a different cross-sectional shape, can only be used with European standard economy series special accessories starting with 'L'.
8 mm groove width, 120 series heavy-duty aluminum profile.
Suitable for frame combinations such as covers, racks, and shelves for large structures.

Product feature

1. Complies with the GB industrial aluminum profile standard, with 8 to 10μ clear anodized surface for scratch resistance.
2. A protective film is applied to the profile surface to prevent bumps and friction during transportation.
3. Free cutting to any specified length in 0.5 mm units within the range of 50 mm to 4000 mm.
4. Supports various alterations such as drilling and bevel cutting.
5. The European standard economy series profile product has a different profile cross-section shape compared to MISUMI's existing products. The specification comparison is as follows:
Aluminum profile specification comparison

Dimensional drawing

Material: 6063-T5

Surface treatment: clear anodized

Specification overview

The specification table includes information such as the specified length range, unit, weight/meter, and inertial intercept.

Part Number

LCF8-120120-1000

Type (type)	Profile cross-section	Total length L Specified unit 0.5 mm	Weight kg/m	Cross-sectional moment of inertia
				Lx (cm⁴)	Ly (cm⁴)
LCF8	120120	50–4000	15.22	781	781

Any length from 50 to 4000 mm can be freely cut in increments of the specified unit 0.5 mm at no additional charge.

Precaution

1. The profile surface is covered with a protective film. Due to adhesion from the glue, a small amount of aluminum debris may remain. This is not a quality problem, and all aluminum debris will be removed once the protective film is taken off.
2. European standard aluminum alloy profiles and MISUMI's existing Japanese material aluminum profile accessories are not compatible. It is recommended to use the economical European standard accessories starting with 'L':

Alteration

Alteration name	Example of alteration code	Specification drawing	Machining content / corresponding accessory
End face tapping (center hole)	LTP/RTP/TPW		Threaded holes machined on the end of the aluminum profile Accessories used for this alteration: Cup head bolt
45-degree cutting	L□T45/R□T45		45-degree angle cutting
Open wrench hole at fixed position	LWP/RWP		Concealed connection Accessories used for this alteration: Cup head bolt Elastic fastener
Drill countersunk hole at specified position	Z8/XA		Drill a counterbored hole at any specified position on the left end face Accessories used for this alteration: Cup head bolt
S hole	LSH/RSH		Drill S hole at fixed position starting from the left end face Accessories used for this alteration: Whistle (built-in connection)
M hole	LMH/RMH		Drill S hole at fixed position starting from the left end face Accessories used for this alteration: Riveted connector (internal connection)

Application example

Recommended product 1	Recommended product 2	Recommended product 3
Economy European standard 40 series aluminum profile, groove width 8 mm	Economy single side tabbed bracket, special for aluminum profile	Economy PVC plate, polyvinyl chloride plate, straight