9090 , Slot Width 10mm Aluminum Frames

Brand :

MISUMI

Caution

Product Description

Product overview

Domestic universal European standard profile with groove width of 10 mm and side length of 90x90 aluminum profile.
Aluminum profile for assembly lines is a structural material that takes advantage of the excellent workability of aluminum alloy, using molds to extrude cylindrical aluminum ingots into shape.
Widely used in assembly line workbenches, FA automation equipment frames, covers, display columns, carts, and other applications.
Suitable for structures such as large equipment hoods, cabinets, and display columns.

Product feature

1. Complies with the GB industrial aluminum profile standard, with 8 to 10μ clear anodized surface for scratch resistance.
2. A protective film is applied to the profile surface to prevent bumps and friction during transportation.
3. Free cutting to any specified length in 0.5 mm units within the range of 50 mm to 4000 mm.
4. Supports various alterations such as drilling and bevel cutting.
5. The European standard economy series profile product has a different profile cross-section shape compared to MISUMI's existing products. The specification comparison is as follows:

Dimensional drawing

Material: 6063-T5

Surface treatment: clear anodized

Specification overview

Part Number

LCF10-9090-1000

Type (type)		Profile cross-section	Total length L		Profile type	Weight kg/m	Cross-sectional moment of inertia
Fixed type	Specified type		Fixed type	Specified type			Lx (cm⁴)	Ly (cm⁴)
KLCF10	LCF10	9090	4000	50–4000 (specified unit 0.5 mm)	Standard	5.91	172.14	172.14
KLCFW10	LCFW10				Heavy type	6.44	200.9	200.9

Any length from 50 to 4000 mm can be freely cut in increments of the specified unit 0.5 mm at no additional charge.

Application example

With the 9090 series profile, you can easily and simply assemble modules such as large frames, covers, racks, and more for automation equipment.
Application example

Precaution

1. The profile surface is covered with a protective film. Due to adhesion from the glue, a small amount of aluminum debris may remain. This is not a quality problem, and all aluminum debris will be removed once the protective film is taken off.
2. European standard aluminum alloy profiles and MISUMI's existing Japanese material aluminum profile accessories are not compatible. It is recommended to use the economical European standard accessories starting with 'L':

Alteration

Alteration name	Example of alteration code	Specification drawing	Machining content / corresponding accessory
End face tapping (center hole)	LTP/RTP/TPW		Threaded holes machined on the end of the aluminum profile Accessories used for this alteration: Cup head bolt
45-degree cutting	L□T45/R□T45		45-degree angle cutting
Open wrench hole at fixed position	LWP/RWP		Concealed connection Accessories used for this alteration: Cup head bolt
Drill countersunk hole at specified position	Z8/XA		Drill a counterbored hole at any specified position on the left end face Accessories used for this alteration: Cup head bolt
S hole	LSH/RSH		Drill S hole at fixed position starting from the left end face Accessories used for this alteration: Whistle (built-in connection)
M hole	LMH/RMH		Drill S hole at fixed position starting from the left end face Accessories used for this alteration: Riveted connector (internal connection)

Recommended product 1	Recommended product 2	Recommended product 3
Economy European standard 9090 aluminum profile with groove width of 10 mm	Economy single side tabbed bracket, special for aluminum profile	Economy PVC plate, polyvinyl chloride plate, straight