4040 Special Shape, Slot Width 8mm Aluminum Frames

The standard groove width of 8 mm for European standard profiles is commonly used in China, with 40 series special-shaped aluminum profiles.
Aluminum profile for assembly lines is a structural material that takes advantage of the excellent workability of aluminum alloy, using molds to extrude cylindrical aluminum ingots into shape.
Widely used in assembly line workbenches, FA automation equipment frames, covers, display columns, carts, and other applications.
R type, 3-side groove, 2-side groove, and two-side slot options are available.

1. Complies with the GB industrial aluminum profile standard, with 8 to 10μ clear anodized surface for scratch resistance.
2. A protective film is applied to the profile surface to prevent bumps and friction during transportation.
3. Free cutting to any specified length in 0.5 mm units within the range of 50 mm to 4000 mm.
4. Supports various alterations such as drilling and bevel cutting.
5. The European standard economy series profile product has a different profile cross-section shape compared to MISUMI's existing products. The specification comparison is as follows:

 

Type ( Type)		Profile cross-section	Total length L		Profile type	Weight kg/m	Cross-sectional moment of inertia
Fixed type	Specified type		Fixed type	Specified type			Lx (cm4)	Ly (cm4)
KLCFR8	LCFR8	4040	4000	50–4000 (specified unit 0.5 mm)	Semicircular	1.56	6.15	6.15
KLCFT8	LCFT8				2-side groove	1.78	8.85	8.8
KLCFH8	LCFH8				Two-side slot		9.18	8.75
-	LCFC8				One-side slot	1.67	9.47	9.47
-	LCFX8				Beveled	1.42	6.34	6.34
-	LCFF8				3-side groove	1.48	8.2	8.3

Any length from 50 to 4000 mm can be freely cut in increments of the specified unit 0.5 mm at no additional charge.

1. The profile surface is covered with a protective film. Due to adhesion from the glue, a small amount of aluminum debris may remain. This is not a quality problem, and all aluminum debris will be removed once the protective film is taken off.
2. European standard aluminum alloy profiles and MISUMI's existing Japanese material aluminum profile accessories are not compatible. It is recommended to use the economical European standard accessories starting with 'L':

With the 3030 series profile, you can easily and simply assemble small and medium-sized frames, covers, racks, and other modules for automation equipment.