Aluminum Hinges Slotted Hole

Brand :

MISUMI

Caution

Product Description

Product Overview

Economy series Aluminum Flat Hinges Slotted hole type
This series products are aluminum slotted hole type butterfly Flat Hinges, with clear anodizing surface treatment.
Note: This product is mounted with slotted hole on one side. It can be fixed using an ultra-low head bolt when processing the slotted hole. Please pay attention to the depth information of processing hole. See the Specification Table fordetails.

Dimensional Drawing

Refer to the Specification Table below for detailed product dimensions

Specifications Overview

Product Material and Surface Treatment Overview Flat Hinges:

Type	Material	Surface Treatment
C-HHYSNA	A6063-T5 Bushing: Polyacetal	Clear Anodize

Specification Table

Part Number		* Allowable Load		Weight g	L	W	K	P	J	S	d Through hole	D Countersunk hole	D₁	C	C₁	Z	Z₁	E
TYPE	No.	kg	N
C-HHYSNA	5	8	78	24	47	35.4	11	25	7.2	21	5.5	11	7	11	5.5	12.5	1.5	5.5
	6			31		48	8.5	30	8	30.5	6.5	13	9.5	13	6.5	15.8	2.8	6
	8			51	63	62	13	37	10	42			11.5			18	5

* The allowable load is the value when 2 pieces are used.

Usage Method

According to the weight of the door body where the Flat Hinges is mounted, the load-carrying capacity of the Flat Hinges can be calculated.
Determine the utilization direction first, and calculate according to the length and width of the door body

Utilization Method	Lengthwise Utilization		Lateral Utilization
	A=2XB	A≠2XB	-

Allowable Load Calculation Formula	Allowable Load =W	Allowable Load =W(B/A)*2	Allowable Load =W

Precautions

To install the Flat Hinges on the panel, etc., it is recommended to choose the nut for butterfly hinge. For details, you can search TYPE: HHPNT or HHPFNT in the website to choose according to the size requirements.

Example of Use

Depending on the profile to be fixed, the selectable Flat Hinges specifications can be determined by the allowable load weight.
For details, refer to the following table for the applicable hinge model.

Flat Hinges common combinations of aluminum profiles can be confirmed and found from the table below.

Representative Dimensional Drawing	Type of Matching Profile	Suitable Profile	* Allowable Load		Product Model	Surface Treatment	Mounting Pitch S mm
			KG	N
	Profile of the Same Size on Two Sides	Link 20/20 Profile	8	78	C-HHFL5	Clear Anodized	21
					C-HHBFL5	Black Anodized
			10	98	HHPSN5	Clear Anodized
					HHPBSN5	Black Anodized
			20	196	C-HHDL5	Clear Anodized
					C-HHBDL5	Black Anodized
		Link 30/30 Profile	8	78	C-HHFL6	Clear Anodized	32
					C-HHBFL6	Black Anodized
			10	98	HHPSN6	Clear Anodized
					HHPBSN6	Black Anodized
			20	196	C-HHDL6	Clear Anodized
					C-HHBDL6	Black Anodized
		Link 40/40 Profile	8	78	C-HHFL8	Clear Anodized	42
					C-HHBFL8	Black Anodized
			10	98	HHPSN8	Clear Anodized
					HHPBSN8	Black Anodized
			20	196	C-HHDL8	Clear Anodized
					C-HHBDL8	Black Anodized
		Link 45/45 Profile	12	118	C-HHFL8-45	Clear Anodized	47
					C-HHBFL8-45	Black Anodized
			15	147	HHPSN8-45	Clear Anodized
					HHPBSN8-45	Black Anodized
			30	294	C-HHDL8-45	Clear Anodized
					C-HHBDL8-45	Black Anodized
	Profile with Different Sizes on Two Sides	Link 20/30 Profile	8	78	C-HHFLS6-5	Clear Anodized	26.5
			10	98	HHPSF6-5
			20	196	C-HHDLS6-5
		Link 30/40 Profile	8	78	C-HHFLS8-5		31.5
			10	98	HHPSF8-5
			20	196	C-HHDLS8-5
		Link 20/45 Profile	8	78	C-HHFLS845-5		34
			10	98	HHPSF845-5
			20	196	C-HHDLS845-5
		Link 20/40 Profile	12	118	C-HHFLS8-6		37
			15	147	HHPSF8-6
			30	294	C-HHDLS8-6
		Link 30/45 Profile	12	118	C-HHFLS845-6		39
			15	147	HHPSF845-6
			30	294	C-HHDLS845-6