Heavy Load Aluminum Hinges Tapered Hole Asymmetric Type

Brand :

MISUMI

Caution

Product Description

Product Overview of Flat Hinges

Economy series Heavy load aluminum Flat Hinges Countersunk hole Special-shaped hole type This series products are heavy load aluminum Flat Hinges, countersunk hole and special-shaped hole type butterfly hinges, with clear anodizing surface treatment.
Note: Among Flat Hinges with the same dimensions and specifications in this series, there are small aluminum ones with lighter loads available for selection. For details, refer to the relevant products

Usage Method of Flat Hinges

According to the weight of the door body where the hinge is mounted, the load-carrying capacity of the Flat Hinges can be calculated.
Determine the utilization direction first, and calculate according to the length and width of the door body.

Utilization Method of Flat Hinges	Lengthwise Utilization		Lateral Utilization
	A=2XB	A≠2XB	-

Allowable Load Calculation Formula	Allowable Load =W	Allowable Load =W(B/A)*2	Allowable Load =W

Specifications Overview of Flat Hinges

Product Material and Surface Treatment Overview of Flat Hinges:

Type of Flat Hinges	Material	Surface Treatment
C-HHDLS	A6063-T5 Bushing: Stainless Steel	Alumite Treatment

Example Use of Flat Hinges

Depending on the profile to be fixed, the selectable of Flat Hinges specifications can be determined by the allowable load weight.For details, refer to the following table for the applicable hinge model.

Flat Hinges Common combinations of aluminum profiles can be confirmed and found from the table below.

Representative Dimensional Drawing	Type of Matching Profile	Suitable Profile	* Allowable Load		Product Model	Surface Treatment	Mounting Pitch S mm
			KG	N
	Profile of the Same Size on Two Sides	Link 20/20 Profile	8	78	C-HHFL5	Clear Anodized	21
					C-HHBFL5	Black Anodized
			10	98	HHPSN5	Clear Anodized
					HHPBSN5	Black Anodized
			20	196	C-HHDL5	Clear Anodized
					C-HHBDL5	Black Anodized
		Link 30/30 Profile	8	78	C-HHFL6	Clear Anodized	32
					C-HHBFL6	Black Anodized
			10	98	HHPSN6	Clear Anodized
					HHPBSN6	Black Anodized
			20	196	C-HHDL6	Clear Anodized
					C-HHBDL6	Black Anodized
		Link 40/40 Profile	8	78	C-HHFL8	Clear Anodized	42
					C-HHBFL8	Black Anodized
			10	98	HHPSN8	Clear Anodized
					HHPBSN8	Black Anodized
			20	196	C-HHDL8	Clear Anodized
					C-HHBDL8	Black Anodized
		Link 45/45 Profile	12	118	C-HHFL8-45	Clear Anodized	47
					C-HHBFL8-45	Black Anodized
			15	147	HHPSN8-45	Clear Anodized
					HHPBSN8-45	Black Anodized
			30	294	C-HHDL8-45	Clear Anodized
					C-HHBDL8-45	Black Anodized
	Profile with Different Sizes on Two Sides	Link 20/30 Profile	8	78	C-HHFLS6-5	Clear Anodized	26.5
			10	98	HHPSF6-5
			20	196	C-HHDLS6-5
		Link 30/40 Profile	8	78	C-HHFLS8-5		31.5
			10	98	HHPSF8-5
			20	196	C-HHDLS8-5
		Link 20/45 Profile	8	78	C-HHFLS845-5		34
			10	98	HHPSF845-5
			20	196	C-HHDLS845-5
		Link 20/40 Profile	12	118	C-HHFLS8-6		37
			15	147	HHPSF8-6
			30	294	C-HHDLS8-6
		Link 30/45 Profile	12	118	C-HHFLS845-6		39
			15	147	HHPSF845-6
			30	294	C-HHDLS845-6

Precautions of Flat Hinges

To install the hinge on the panel, etc., it is recommended to choose the nut for the butterfly Flat Hinges. For details, you can search TPYE: HHPNT or HHPFNT in the website to choose according to the size requirements.

Product Feature of Flat Hinges

of Flat Hinges, This series products are interchangeable with light load products in size to meet the structural requirements of different parts of the equipment.

Dimensional Drawing of Flat Hinges

Economic type aluminum butterfly hinge Dimensional drawing

Refer to the Specification Table below for detailed product dimensions

Specification Table of Flat Hinges

Part Number		* Allowable Load		Weight	L	W	K	P	J	S	N		T	E	R
Type	No.	kg	N								Through Hole	Counterbored Hole
C-HHDLS Clear Anodized	6-5	8	78	33	47	44	8.5	30	8	26.5	5.5	11	3.5	6	5.5
											6.5	13
	8-5	8	78	52	63	55	13	37	10	31.5	5.5	11	3.5	6	5.5
											6.5	13
	845-5	8	78	52	63	55	13	37	7.5	34	5.5	11	3.5	6	5.5
											6.5	13
	8-6	12	118	55	63	62	13	37	10	37	6.5	13	3.5	6	5.5
	845-6	12	118	55	63	62	13	37	8	39	6.5	13	3.5		5.5

* The allowable load is the value when 2 pieces are used.