Aluminum Hinges Tapered Hole Asymmetric Type

Brand :

MISUMI

Caution

Product Description

Product Overview

Economy series aluminum hinge Countersunk hole Special-shaped hole type.This series products are economy series aluminum hinges, countersunk hole and special-shaped hole type butterfly hinges, with clear anodizing surface treatment.
Note: Among hinges with the same dimensions and specifications in this series, there are small aluminum ones with heavier loads available for selection. For details, refer to the relevant products

Dimensional Drawing

Material Table

Product Material and Surface Treatment Overview:

Type	Material	Surface Treatment
C-HHFLS	A6063-T5 Bushing: Polyacetal	Clear Anodized

Specification Table

Part Number		* Allowable Load		Weight	L	W	K	P	J	S	N		T	E	R
Type	No.	kg	N								Through Hole	Counterbored Hole
C-HHFLS Clear Anodized	6-5	8	78	29	47	44	8.5	30	8	26.5	5.5	11	3.5	6	5.5
											6.5	13
	8-5	8	78	46	63	55	13	37	10	31.5	5.5	11	3.5	6	5.5
											6.5	13
	845-5	8	78	46	63	55	13	37	7.5	34	5.5	11	3.5	6	5.5
											6.5	13
	8-6	12	118	49	63	62	13	37	10	37	6.5	13	3.5	6	5.5
	845-6	12	118	49	63	62	13	37	8	39	6.5	13	3.5		5.5

* The allowable load is the value when 2 pieces are used.

Product Features

Flat Hinges,This series products are interchangeable with heavy load products in size to meet the structural requirements of different parts of the equipment.

Precautions

To install the hinge on the panel, etc., it is recommended to choose the nut for the butterfly Flat Hinges. For details, you can search TPYE: HHPNT or HHPFNT in the website to choose according to the size requirements.

Usage Method

According to the weight of the door body where the hinge is mounted, the load-carrying capacity of the hinge can be calculated.
Determine the utilization direction first, and calculate according to the length and width of the door body

Utilization Method	Lengthwise Utilization		Lateral Utilization
	A=2XB	A≠2XB	-

Allowable Load Calculation Formula	Allowable Load =W	Allowable Load =W(B/A)*2	Allowable Load =W

Example of Use

Depending on the profile to be fixed, the selectable Flat Hinges specifications can be determined by the allowable load weight.
For details, refer to the following table for the applicable hinge model.

Flat Hinges common combinations of aluminum profiles can be confirmed and found from the table below.

Representative Dimensional Drawing	Type of Matching Profile	Suitable Profile	* Allowable Load		Surface Treatment	Mounting Pitch S mm
			KG	N
	Profile of the Same Size on Two Sides	Link 20/20 Profile	8	78	Clear Anodized	21
					Black Anodized
			10	98	Clear Anodized
					Black Anodized
			20	196	Clear Anodized
					Black Anodized
		Link 30/30 Profile	8	78	Clear Anodized	32
					Black Anodized
			10	98	Clear Anodized
					Black Anodized
			20	196	Clear Anodized
					Black Anodized
		Link 40/40 Profile	8	78	Clear Anodized	42
					Black Anodized
			10	98	Clear Anodized
					Black Anodized
			20	196	Clear Anodized
					Black Anodized
		Link 45/45 Profile	12	118	Clear Anodized	47
					Black Anodized
			15	147	Clear Anodized
					Black Anodized
			30	294	Clear Anodized
					Black Anodized
	Profile with Different Sizes on Two Sides	Link 20/30 Profile	8	78	Clear Anodized	26.5
			10	98
			20	196
		Link 30/40 Profile	8	78		31.5
			10	98
			20	196
		Link 20/45 Profile	8	78		34
			10	98
			20	196
		Link 20/40 Profile	12	118		37
			15	147
			30	294
		Link 30/45 Profile	12	118		39
			15	147
			30	294

Depending on the profile to be fixed, the selectable Flat Hinges specifications can be determined by the allowable load weight.For details, refer to the following table for the applicable hinge model.
Flat Hinges common combinations of aluminum profiles can be confirmed and found from the table below.