2525 / 2550, Slot Width 6mm Aluminum Frames

Brand :

MISUMI

Caution

Product Description

Product overview

Domestic universal European standard aluminum profile with 6 mm groove width and side lengths of 2525 and 2550.
Aluminum profile for assembly lines is a structural material that takes advantage of the excellent workability of aluminum alloy, using molds to extrude cylindrical aluminum ingots into shape.
Widely used in assembly line workbenches, FA automation equipment frames, covers, display columns, carts, and other applications.

Product feature

1. Complies with the GB industrial aluminum profile standard, with 8 to 10μ clear anodized surface for scratch resistance.
2. A protective film is applied to the profile surface to prevent bumps and friction during transportation.
3. Free cutting to any specified length in 0.5 mm units within the range of 50 mm to 4000 mm.
4. Supports various alterations such as drilling and bevel cutting.
5. The European standard economy series profile product has a different profile cross-section shape compared to MISUMI's existing products. The specification comparison is as follows:
Aluminum profile specification comparison

Dimensional drawing

Material	Surface treatment
6063-T5	Clear anodized

Specification table

Part Number

LCF6-2525-1000

Type ( Type)		Profile cross-section	Total length L		Weight kg/m	Cross-sectional moment of inertia
Fixed type	Specified type		Fixed type	Specified type		Lx (cm⁴)	Ly (cm⁴)
KLCF6	LCF6	2525	4000	50–4000 (specified unit 0.5 mm)	0.79	0.72	0.72
		2550			1.42	3.1	12.4

Any length from 50 to 4000 mm can be freely cut in increments of the specified unit 0.5 mm at no additional charge.

Application example

■ Used for equipment frames
Aluminum profile application example

Precaution

1. The profile surface is covered with a protective film. Due to adhesion from the glue, a small amount of aluminum debris may remain. This is not a quality problem, and all aluminum debris will be removed once the protective film is taken off.
2. European standard aluminum alloy profiles and MISUMI's existing Japanese material aluminum profile accessories are not compatible. It is recommended to use the economical European standard accessories starting with 'L':

Alteration
Various alterations are available, including 45° miter cutting, end face tapping, wrench hole, counterbored hole, whistle hole, and more.

Alteration name	Example of alteration code	Specification drawing	Machining content / corresponding accessory
End face tapping (center hole)	LTP/RTP/TPW		Threaded holes machined on the end of the aluminum profile Accessories used for this alteration: Cup head bolt
45-degree cutting	L□T45/R□T45		45-degree angle cutting
Open wrench hole at fixed position	LWP/RWP		Concealed connection Accessories used for this alteration: Cup head bolt
Drill countersunk hole at specified position	Z6/XA		Drill a counterbored hole at any specified position on the left end face Accessories used for this alteration: Cup head bolt
S hole	LSH/RSH		Drill S hole at fixed position starting from the left end face Accessories used for this alteration: Whistle (built-in connection)
M hole	LMH/RMH		Drill S hole at fixed position starting from the left end face Accessories used for this alteration: Riveted connector (internal connection)

Recommended product 1	Recommended product 2	Recommended product 3
Economy European standard 40 series aluminum profile, groove width 8 mm	Economy single side tabbed bracket, special for aluminum profile	Economy PVC plate, polyvinyl chloride plate, straight