Leveling Mounts For Heavy Load With Anti-Slip Rubber
Caution
Product Description
- Economy series Leveling Mounts for Heavy Load With Anti-Slip Rubber
- Type: Adjusting Bolt with Rubber Foot.
- Part number for series including of C-CFJFNV and C-CFJFNVS.
- Body Material: Q235 Carbon Steel and Stainless steel.
- Surface Treatment: Trivalent Chromate solution for Q235 Carbon Steel.
- Bottom Material: Rubber
- Nominal of Thread size (M): 8, 10, 12, 16, 20 and 24.
- Thread Length size: 50, 80, 100, 120, 150, 180 and 200 mm.
- This is an economy series; The price is cheaper than the MISUMI standard product.
Economy Anti-Slip Leveling Mount
- Heavy load capacity with anti-slip rubber base
- Multiple material options available.
- Zinc plating for enhanced corrosion resistance
- Screw with wide range of thread size options
- Ideal for stabilizing heavy machinery on flat surfaces
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Adjuster Product Overview
An adjuster with high quality, cheap price and excellent cost performance
Adjuster Product Feature
No height adjustment knob.
【Material Table】
| Type | A Body | B Glue Part | |
 Material |  Surface Treatment | Material | |
| C-CFJFNV | Q235 | Zinc Plating | Rubber |
| C-CFJFNVS | Stainless Steel | - | Rubber |
Adjuster Usage Method
On the premise of ensuring safety, raise the equipment with a forklift (light equipment can roll the equipment sideways) to a height that is convenient to screw into the inner teeth.
Screw in the adjuster through threads. After assembling the required number of adjusters, lower the forklift and adjust horizontally.
Adjuster Precautions
1. Check whether the screw can be mounted with female thread (it is recommended to re-tap after coating the threads).
2. The selection adjuster should be screwed in more than half of the thread as far as possible (the shorter thread screwed in, the greater the bearing capacity).
3. For heavy equipment, it is recommended to add lubricating grease to threads for easy adjustment.
