Heavy Load Hinges With Bearing
Brand :
MISUMI
Caution
Product Description
Product Overview of Flat Hinges
Economy series butterfly Flat Hinges For heavy object Bearing included product.
Flat Hinges,This series of products are butterfly hinges for heavy objects, which can reach an allowable load of up to 1000N depending on the dimensions (the value when using 2 pcs). Bearings are fitted in the middle, which can greatly reduce thestarting force during opening and closing, making the opening and closing more smooth.
Flat Hinges material is stainless steel. The openings are divided into two types for flat head bolts and ultra-low head bolts. Please choose carefully.
Flat Hinges,This series of products are butterfly hinges for heavy objects, which can reach an allowable load of up to 1000N depending on the dimensions (the value when using 2 pcs). Bearings are fitted in the middle, which can greatly reduce thestarting force during opening and closing, making the opening and closing more smooth.
Flat Hinges material is stainless steel. The openings are divided into two types for flat head bolts and ultra-low head bolts. Please choose carefully.
Product Feature of Flat Hinges
【Features of Flat Hinges】
Butterfly Flat Hinges for heavy objects can achieve high allowable loads, and when used with high-hardness bolts, they can reach a load capacity of up to 1000N (the value when using 2 pcs). Bearings are fitted in the middle, which can greatlyreduce the starting force during opening and closing, making the opening and closing more smooth.
It is recommended to use only two products for each door. Multiple products cannot achieve the effect of increasing the load. At the same time, multiple hinges will cause other interference problems caused by insufficient center-axisstraightness of the hinge.
Butterfly Flat Hinges for heavy objects can achieve high allowable loads, and when used with high-hardness bolts, they can reach a load capacity of up to 1000N (the value when using 2 pcs). Bearings are fitted in the middle, which can greatlyreduce the starting force during opening and closing, making the opening and closing more smooth.
It is recommended to use only two products for each door. Multiple products cannot achieve the effect of increasing the load. At the same time, multiple hinges will cause other interference problems caused by insufficient center-axisstraightness of the hinge.
Specifications Overview of Flat Hinges
Product Material, Surface Treatment Overview of Flat Hinges :
・Flat Hinges Material Table
・Flat Hinges Material Table
| Type of Flat Hinges |  Material |  Surface Treatment | ||
| Flat head bolt type | Ultra-low head bolt type | Chain piece | Shaft | |
| C-HHSZB | C-HHSZTB | SUS304 | Buffed | - |
Example Use of Flat Hinges
butterfly Flat Hinges for heavy object Example of use
Precautions of Flat Hinges
The flat head bolt type and the ultra-low head bolt type have the same product specifications, only the mounting holes are different. Please refer to the Specification Table for details.
Butterfly Flat Hinges can't increase the allowable load by adding more products. On the contrary, during installation, it is easy to cause eccentric load due to the fact that three center axes can not be on the same horizontal line at the sametime.
It is easy for the door panel to be in a non-displacement state when standing still.
Butterfly Flat Hinges can't increase the allowable load by adding more products. On the contrary, during installation, it is easy to cause eccentric load due to the fact that three center axes can not be on the same horizontal line at the sametime.
It is easy for the door panel to be in a non-displacement state when standing still.
Dimensional Drawing of Flat Hinges
Economy series butterfly Flat Hinges For heavy object Including bearing Dimensional drawing
Refer to the Specification Table below for detailed product dimensions
Specification Table of Flat Hinges
| Part Number (Type·No.) |
| C-HHSZB50 C-HHSZTB50 |
| Part Number | W | W1 | L1 | C | C1 | t | B | C-HHSZB | C-HHSZTB | Number of segments | ＊Allowable Load (N) | |||
| Type | L | N | D | d | ||||||||||
| Through Hole | Countersunk hole | |||||||||||||
| C-HHSZB C-HHSZTB | ||||||||||||||
| 65 | 65 | 40 | 35 | 6 | 14 | 5 | 5 | 5.6 | 10.6 | 9.6 | 5.6 | 3 | 450 | |
| 75 | 75 | 50 | 40 | 8 | 16 | 6 | 7 | 6.6 | 12.6 | 10.6 | 6.6 | 650 | ||