Cam Followers Stainless Steel, Flat, Hex Socket
Brand :
MISUMI
Caution
Product Description
Specifications with d ≥ 10 are equipped with a grease nipple
kgf = N × 0.101972
*Low dust generation type reference () dimensions
E-CFFAC, d = 12/16/18 specifications are not currently available for sale
■ Note
1. The low dust generation type cam follower is filled with low dust generation grease AFE-CA (THK). Its performance and operating temperature are as follows.
Note: This grease is not suitable for vacuum environments.
Direction of movement
Installation Method
When installing, do not strike the flange of the cam bearing directly with a hammer, as this may cause poor rotation or breakage. Please use a hex wrench or a flathead screwdriver.
Secure the hex socket or screwdriver slot, then use a wrench to tighten the nut.
Bolt tightening torque
When installing the cam bearing follower, do not exceed the maximum tightening torque value of the screw. Otherwise, the threaded part may be damaged.
Economy Cam Followers Stainless Steel
Flat Roller Hex Socket Stainless Steel
- Made of high-quality stainless steel SUS440. Provides exceptional corrosion resistance, making it ideal for environments exposed to liquids or clean rooms.
- Flat roller design with hex socket head. Ensures easy installation and secure attachment, simplifying maintenance and reducing downtime.
- Available in various sizes to meet diverse needs. Outer diameters and roller widths in multiple ranges.
- Designed to handle high radial loads. Suitable for applications involving heavy loads and high speeds, ensuring reliability in demanding environments.
- Equipped with needle rollers for low friction. Supports high-speed rotation, enhancing performance and efficiency in machinery.
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Product Overview
A cam follower bearing is a shaft-type bearing with needle rollers assembled between a thick-walled outer ring and an inner ring, making it ideal for use on guide rails for conveying.
A cam follower is a high-performance shaft-type bearing with needle-shaped rollers, known as needle rollers, assembled inside. The needle rollers enhance rotational capability and can withstand high-speed rotation. In addition, the outer ring features a thicker wall design compared to standard bearings, making it suitable for applications subject to impact loads or heavy loads.
A cam follower is a high-performance shaft-type bearing with needle-shaped rollers, known as needle rollers, assembled inside. The needle rollers enhance rotational capability and can withstand high-speed rotation. In addition, the outer ring features a thicker wall design compared to standard bearings, making it suitable for applications subject to impact loads or heavy loads.
Dimensional Drawing
Specifications with d ≥ 10 are equipped with a grease nipple
| Type | Material | Accessories | |
| Application | With seal | ||
| Standard type | C-CFMAS | Equivalent to SUS440 | 1 hexagon nut (SUS304) |
| Low dust generation | E-CFFAC | Equivalent to SUS440 | 1 hexagon nut (SUS304) |
Specification Table
| Type |  Roller Outer Diameter D | Outer Diameter D Tolerance | M × Pitch | Roller Width B | B1 | L | ℓ | r | f | *H | Basic Rated Load | Maximum Static Permissible Load (N) | Maximum Speed (rpm) | ||
 Type |  d | Cr (Dynamic) N | Cor (Static) N | ||||||||||||
| C-CFMAS E-CFFAC | 3 | 10 | 0 -0.018 | 3 × 0.5 | 7 | 8 | 17 | 5 | 0.5 | 7 | 2 | 1000 | 780 | 360 | 17200 |
| 4 | 12 | 4 × 0.7 | 8 | 9 | 20 | 6 | 8.8 | 2.5 | 1230 | 920 | 683 | 15300 | |||
| 5 | 13 | 5 × 0.8 | 9 | 10 | 23 | 7.5 | 10.1 | 3 | 1890 | 1620 | 890 | 11000 | |||
| 6 | 16 | 6 × 1.0 | 11 | 12 | 28 | 9 | 0.8 | 12 | 3(4) | 2580 | 1910 | 1100 | 9200 | ||
| 8 | 19 | 0 -0.021 | 8 × 1.25 | 32 | 11 | 14 | 4 | 2910 | 2440 | 1779 | 8600 | ||||
| 10 | 22 | 10 × 1.25 | 12 | 13 | 36 | 13 | 16.4 | 5(4) | 3875 | 3279 | 1862 | 6200 | |||
| 26 | 4300 | 3535 | 2218 | 4800 | |||||||||||
| 12 | 30 | 12 × 1.5 | 14 | 15 | 40 | 14 | 1 | 22.3 | 6 | 4630 | 3753 | 2534 | 4300 | ||
| 32 | 0 -0.025 | 4800 | 3981 | 2931 | 4100 | ||||||||||
| 16 | 35 | 16 × 1.5 | 18 | 19.5 | 52 | 18 | 1.2 | 27 | 5100 | 5010 | 3416 | 3700 | |||
| 18 | 40 | 18 × 1.5 | 20 | 21.5 | 58 | 20 | 1.3 | 31 | 6(8) | 5400 | 5210 | 3760 | 3500 | ||
kgf = N × 0.101972*Low dust generation type reference () dimensionsE-CFFAC, d = 12/16/18 specifications are not currently available for sale■ Note
1. The low dust generation type cam follower is filled with low dust generation grease AFE-CA (THK). Its performance and operating temperature are as follows.
| Thickener | Urea-based compound |
| Base oil | Synthetic oil |
| Base oil kinematic viscosity (40°C, mm2/s) | 100 |
| Worked penetration (25°C·60W) | 260 |
| Dropping point (°C) | 258 |
| Evaporation: wt% (99°C·22h) | 0.1 |
| Oil separation: wt% (100°C·22h) | 0.8 |
| Operating temperature (°C) | -40 to +160 (atmospheric environment) |
Product Features
1. With shaft, easy to install!
2. Ideal for load-bearing applications!
3. Also suitable for high-speed rotation!
Standard Cam Follower Structure
Roller Guidance Method
Cam followers with cages are suitable for applications requiring low friction and high speed, while full complement cam followers are suitable for high-speed rotation and heavy load applications.
Seal structure
In non-sealed bearings, the gap between the outer ring and the end rod circumferential area, as well as between the outer ring and the side plate, is small, forming a labyrinth. In sealed bearings, a sealing gasket is installed in the shielded labyrinth section to prevent foreign matter from entering.
Outer ring outer diameter shape
Bearings with a spherical outer ring can alleviate uneven loads caused by installation issues. Bearings with an arc-shaped outer ring have a larger contact area with the guide rail, making them suitable for applications with heavy loads or guide rails with low hardness.
Comparison of slide rail load capacity
2. Ideal for load-bearing applications!
3. Also suitable for high-speed rotation!
Standard Cam Follower Structure
Roller Guidance Method
Cam followers with cages are suitable for applications requiring low friction and high speed, while full complement cam followers are suitable for high-speed rotation and heavy load applications.
Seal structure
In non-sealed bearings, the gap between the outer ring and the end rod circumferential area, as well as between the outer ring and the side plate, is small, forming a labyrinth. In sealed bearings, a sealing gasket is installed in the shielded labyrinth section to prevent foreign matter from entering.
Outer ring outer diameter shape
Bearings with a spherical outer ring can alleviate uneven loads caused by installation issues. Bearings with an arc-shaped outer ring have a larger contact area with the guide rail, making them suitable for applications with heavy loads or guide rails with low hardness.
Comparison of slide rail load capacity
Example of Use
Direction of movement
Installation Method
When installing, do not strike the flange of the cam bearing directly with a hammer, as this may cause poor rotation or breakage. Please use a hex wrench or a flathead screwdriver.
Secure the hex socket or screwdriver slot, then use a wrench to tighten the nut.
Bolt tightening torque
When installing the cam bearing follower, do not exceed the maximum tightening torque value of the screw. Otherwise, the threaded part may be damaged.
Precautions
· If the cam follower drops to the ground or is struck with force, it may be damaged.
· When subjected to impact, even if there is no visible damage, functionality may still be impaired. Please take note.
· Cam followers are suitable for radial loads and are not well suited for thrust loads. Therefore, please avoid using them in applications that apply thrust loads.
· Due to size constraints, some cam followers are not pre-filled with grease.
Please refer to the table below and add an appropriate amount of grease to products that are not pre-filled before use.
Note: The product packaging method has changed from box packaging to bag packaging. During the transition period, mixed shipments may occur, but this does not affect usage.· When subjected to impact, even if there is no visible damage, functionality may still be impaired. Please take note.
· Cam followers are suitable for radial loads and are not well suited for thrust loads. Therefore, please avoid using them in applications that apply thrust loads.
· Due to size constraints, some cam followers are not pre-filled with grease.
Please refer to the table below and add an appropriate amount of grease to products that are not pre-filled before use.