Toothed Timing Belts P8M

Brand :

MISUMI

Caution

Product Description

Product Overview

Usually, timing pulleys and timing belts are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.

Dimensional Drawing

Specifications Overview

■Material/Specification Table

Type	Material
C－PTBN	Body	Chloroprene
	Toothed Face	Nylon Canvas
	Core Wire	Glass Fiber

Type	Tooth Pitch	L	H	h	PLD	r	Unit Weight g/m (Width: 10mm)
P8M	8	5.2	5.5	2.9	0.686	0.8	56

Operating Temperature -25 to 80℃

Belt circumference length is core wire length

The model number on the back of the product is the supplier model.

■ Type P8M (Tooth Pitch: 8mm)

Part Number			Number of Teeth	Belt Circumference Length (mm)
Type	Belt Number	Norminal Width	Number of Teeth	Belt Circumference Length (mm)
C－PTBN	288 P8M	150 (15mm) 250 (25mm)	36	288
	376 P8M		47	376
	384 P8M		48	384
	424 P8M		53	424
	440 P8M		55	440
	480 P8M		60	480
	512 P8M		64	512
	536 P8M		67	536
	560 P8M		70	560
	600 P8M		75	600
	632 P8M		79	632
	640 P8M		80	640
	672 P8M		84	672
	680 P8M		85	680
	712 P8M		89	712
	720 P8M		90	720
	728 P8M		91	728
	760 P8M		95	760
	800 P8M		100	800
	816 P8M		102	816
	840 P8M		105	840
	848 P8M		106	848
	856 P8M		107	856
	864 P8M		108	864
	880 P8M		110	880
	896 P8M		112	896
	912 P8M		114	912
	920 P8M		115	920
	960 P8M		120	960
	968 P8M		121	968
	976 P8M		122	976
	984 P8M		123	984
	992 P8M		124	992
	1000 P8M		125	1000
	1016 P8M		127	1016
	1024 P8M		128	1024
	1032 P8M		129	1032
	1040 P8M		130	1040
	1056 P8M		132	1056
	1064 P8M		133	1064
	1080 P8M		135	1080
	1096 P8M		137	1096
	1104 P8M		138	1104

Part Number			Number of Teeth	Belt Circumference Length (mm)
Type	Belt Number	Norminal Width	Number of Teeth	Belt Circumference Length (mm)
C－PTBN	1120 P8M	150 (15mm) 250 (25mm)	140	1120
	1128 P8M		141	1128
	1136 P8M		142	1136
	1144 P8M		143	1144
	1152 P8M		144	1152
	1160 P8M		145	1160
	1168 P8M		146	1168
	1184 P8M		148	1184
	1192 P8M		149	1192
	1200 P8M		150	1200
	1224 P8M		153	1224
	1240 P8M		155	1240
	1248 P8M		156	1248
	1280 P8M		160	1280
	1336 P8M		167	1336
	1344 P8M		168	1344
	1352 P8M		169	1352
	1360 P8M		170	1360
	1400 P8M		175	1400
	1424 P8M		178	1424
	1440 P8M		180	1440
	1480 P8M		185	1480
	1520 P8M		190	1520
	1544 P8M		193	1544
	1560 P8M		195	1560
	1600 P8M		200	1600
	1680 P8M		210	1680
	1736 P8M		217	1736
	1760 P8M		220	1760
	1800 P8M		225	1800
	2000 P8M		250	2000
	2240 P8M		280	2240
	2256 P8M		282	2256
	2272 P8M		284	2272
	2400 P8M		300	2400
	2520 P8M		315	2520
	2552 P8M		319	2552
	2600 P8M		325	2600
	2800 P8M		350	2800
	2840 P8M		355	2840
	3048 P8M		381	3048
	3200 P8M		400	3200
	3600 P8M		450	3600
	4400 P8M		550	4400

Product Features

		■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M) Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission. Feature 2: Reduce the noise generated by high-speed operation. Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -30 to 90℃.
		■ P type circular tooth profile rubber timing belt (P5M/P8M) Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission. Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation. Feature 3: Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -25 to 80℃.
		■ Trapezoidal tooth profile rubber timing belt (MXL/XL/L/H/T5/T10) Feature 1: Suitable for light load transmission, standard torque driving. Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -30 to 90℃ (MXL/XL/H) , 0 to 80℃ (T5/T10)

Usage Method

■ Installation method for timing belt transmission
①	Turn off the power supply, remove the protective cover, loosen the motor assembly bolts, move the motor so that the belt is loose enough. The belt can be removed without prying. Never try to pry the belt down.
②	Remove the old belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
③	Choose the right belt to replace.
④	To clean the belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use.
⑤	Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
⑥	Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device. Asymmetry of the pulley is shown as follows:

⑦	Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
⑧	Install a new belt on the pulley. Never pry or use too much force.
⑨	Tighten to narrow the center distance of the transmission device until the tension tester detects that the belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
⑩	Tighten the assembly bolts of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
⑪	Start the device and observe the belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor. If it feels too hot to the touch, the belt may be too tight, the bearing may be asymmetrical, or the lubrication may be incorrect.

Precautions

①Do not bend the belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage

②Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.

③ Please avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Example of Use

Usage Method Example Drawing	Instructions for use of timing wheel and timing belt
	① Driving (The driven wheel is driven by the driving wheel for transmission)
	② Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)

Usage Method Example Drawing	Instructions for use of timing wheel and timing belt
	③ Conveyance (Plates are conveyed by two timing toothed belts)
	④ Traction transmission (Workpieces are clamped and transmitted by the belt)

Application Industries

Food	Semiconductor	Smartphone

Automotive	Electronic & Electrical Appliances	Medical

High Torque Timing Pulleys S2M Type	Flat Belt	Timing Belts MXL

Representative model: HTPA48S2M040-B-N10	Representative model: HBLT350-4.23	Representative model: C-TBN236MXL025