Lead Screw Stop Plates For Support Unit Square Type
Brand :
MISUMI
Caution
Product Description
Product Overview of Lead Screw Clamps
Note: Do not use without inserting the Lead Screw Clamps (empty tightening). It may deform, causing it to be unusable.
As a support unit specially developed for the economy series 30 degree Lead Screw Clamps and nut, this product is used in combination with the economy series 30 degree Lead Screw Clamps support.
On the Economy Series Support page, select products with anti-rotation fasteners, which can be purchased in sets at lower prices.
As a support unit specially developed for the economy series 30 degree Lead Screw Clamps and nut, this product is used in combination with the economy series 30 degree Lead Screw Clamps support.
On the Economy Series Support page, select products with anti-rotation fasteners, which can be purchased in sets at lower prices.
Product Features of Lead Screw Clamps
Lead Screw Clamps is suitable for manual applications, facilitating design and selection when combined with the economy series 30 degree Lead Screw Clamps and support unit.
Quality is assured with the engraved MISUMI logo.
Quality is assured with the engraved MISUMI logo.
Dimensional Drawing of Lead Screw Clamps
Specifications Overview of Lead Screw Clamps
| Body | Clamp Lever | ||
 Material |  Surface Treatment | Material | Surface Treatment |
| Equivalent to S20C | Ferroferric Oxide Protective Film | Aluminum Castings | Baked Paint |
Specifications Table
| Part Number | T | H | R | E | Matching support model | |
| Type | Bearing I.D. Q | |||||
| C－MDWZP | 8 | 54.5 | 15 | 22 | 6 | C－MDWZ8 |
| 10 | 59.5 | 20 | 23 | 8 | C－MDWZ10 | |
| 12 | 10 | C－MDWZ12 | ||||
| 15 | 61.5 | 22 | 25 | 12 | C－MDWZ15 | |
Example Use of Lead Screw Clamps
* Economy series position indicator has not been launched yet. Coming soon.
· Standardization Lead Screw Clamps of support unit
“Support unit” dedicated for trapezoidal screw
There is no need to design the bearing mechanism.
· Standardize the shape of Lead Screw Clamps shaft end
If the shaft diameter and length are determined, they can be combined directly with the support unit.
There is no need for complicated shaft end shape design.
· Lead Screw Clamps no need for design of various parts in combination
The parts can be directly assembled as long as their specifications are met.
There is no need for complicated combination design of various parts.
“Support unit” dedicated for trapezoidal screw
There is no need to design the bearing mechanism.
· Standardize the shape of Lead Screw Clamps shaft end
If the shaft diameter and length are determined, they can be combined directly with the support unit.
There is no need for complicated shaft end shape design.
· Lead Screw Clamps no need for design of various parts in combination
The parts can be directly assembled as long as their specifications are met.
There is no need for complicated combination design of various parts.
Related Products of Lead Screw Clamps
 |  |  |
| Lead Screw For Support Units | Lead Screw Nuts Flanged | Lead Screw Support Units Fixed Side Square Type Short type |