Square Flanged Linear Bushings, Medium

The flanged Linear Bushings, linear bearing integrates the linear bearing with the support, which is compact in structure and easy to assemble to the mechanism accurately and simply.
With an overall length about 1.5 times and allowable moment about 4.3 times that of the single liner type, it is an ideal choice when there is no sufficient space for the double liner type.

Linear bearing is a linear type motion guiding mechanism matched with linear guide shaft. The steel ball rolls circularly along the track groove formed by the shell and the retainer, and the linear bearing reciprocates linearly relative to the guide shaft.
Through the rolling of steel ball, high-efficiency movement with low friction resistance can be realized.

Linear Bushings Feature 1: Effective utilization of space. The combination of the guide shaft and the linear bearing enables effective use of space, suitable for small mechanism designs.
Linear Bushings Feature 2: With an overall length about 1.5 times and allowable moment about 4.3 times that of the single liner type, it is an ideal choice when there is no sufficient space for the double liner type.
Linear Bushings Feature 3: Good interchangeability. Linear bearings have good interchangeability because they can be used with shafts randomly.
Linear Bushings Feature 4: Appropriate specifications can be selected according to the conditions of use.
Linear Bushings Feature 5: More cost effective than the linear guide.

■Material Specification Table of Linear Bushings

Housing			Ball	Retainer	Operating Environment Temperature	Accessories
Material	Hardness	Surface Treatment	Material	Material
Equivalent to SUJ2	58HRC～	-	Equivalent to SUJ2	Resin	-20 to 80℃	Seal packing Material Nitrile Rubber
		Electroless Nickel Plating

If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating.

■ Linear Bushings Regular maintenance:
① Before use, please apply grease to the ball row inside the linear bearing, and then replenish it in due course. Grease forms an oil film on the surfaces of steel ball and rolling surface (guide shaft bushing) of linear bearing, which
effectively reduces friction and prevents sintering. Grease reduction and aging will greatly affect the life of linear bearing.
② Recommended grease: lithium soap grease.
for details. ③ Recommended grease filling interval: Usually every 6 months.
④When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.

■ Linear Bushings Dust prevention measures:
If dust or foreign matter enters the inside of the linear bearing, it may damage the circulation of steel balls, resulting in unexpected failures. When used in harsh environment, please install dust cover and protection cover, etc.

■ MISUMI linear bearing is recommended to be combined with guide shaft with quenching g6 tolerance.

■ MISUMI linear bearing is recommended to be installed on the holder with H7 tolerance. The linear bearing is in clearance fit with the holder.

■Material Specification Table

Housing			Ball	Retainer	Operating Environment Temperature	Accessories
Material	Hardness	Surface Treatment	Material	Material
Equivalent to SUJ2	58HRC～	-	Equivalent to SUJ2	Resin	-20 to 80℃	Seal packing Material Nitrile Rubber
		Electroless Nickel Plating

■Dimension Specification Table

Part Number		D Tolerance			L		H	T	d	d1	t	P.C.D.	W	Lateral Misalignment (maximum)	Number of ball rows	＊ Perpendicularity	Basic Rated Load		Allowable Static Moment (N·m)	Weight (g)
dr	Tolerance		No Surface Treatment	With Surface Treatment		Tolerance											C (Dynamic) N	Co (Static) N		Square Flanged
6	0 -0.012	12	0 -0.013	0 -0.018	29	±0.4	28	5	3.5	6	3.1	20	22	0.018	4	0.018	226	310	1.42	21
8		15			37		32					24	25				310	452	2.12	39
10		19	0 -0.016	0 -0.023	47		40	6	4.5	7.5	4.1	29	30				508	718	4.37	65
12		21					42					32	32				634	814	6.2	69
16		28	0 -0.018	0 -0.025	56		48					38	37		5	0.02	1164	1448	13.1	132
20	0 -0.015	32	0 -0.021	0 -0.028	65		54	8	5.5	9	5.1	43	42	0.025		0.025	1554	2068	18.3	197
25		40			83		62					51	50		6		1725	3068	25.3	440
30	0 -0.018	45			90		74	10	6.6	11	6.1	60	58				2440	3974	42.7	481