Slide Rails Three Step Slide Light load Type(Width:20mm, Stainless Steel)

Linear Slide Rails, also known as drawer guide, refers to the hardware connection parts fixed to the equipment or furniture cabinet for in and out of drawer or cabinet board. Slide Rails is suitable for connecting the loading and unloading mechanism, filing cabinet, steel drawer and so on.
The steel ball Slide Rails is basically a two-section or three-section metal slide rail. The common one is the structure installed on the side of the drawer (one set on the left and right), which is relatively simple to install and space saving.

The steel ball in the structure can make the force spread around, ensure the stability of the drawer in horizontal and vertical directions, and can bear a large weight.
MISUIMI new Economy series Slide Rails adopts high-quality high-accuracy steel ball, and high quality mold forming, featuring small resisting force during assembly and operation, long life, and excellent load-bearing capacity.

Slide Rails Length L	Stroke ST	A	B	C	D
200	231	－	－	145	160
250	280			195	210
300	329		160	245	260
350	379		210	295	310
400	428		260	345	360
450	477	205	310	395	410
500	526	230	360	445	460

Use M4 round head screws or small clamping screws for mounting Slide Rails.
When it is installed horizontally, the load capacity is reduced to about 25% of the rated value (reference).

Slide Rails Due to different plate thicknesses, the load-bearing capacity of the economy series is slightly lower than that of the MISUMI standard products, so it is more suitable for scenarios with lower requirements on load bearing.

Precautions for use of Slide Rails

When installing linear Slide Rails, install them in parallel with the left and right rails perpendicular to the ground.
Load resistance will be significantly reduced if the installation is bad. When the slide rail is installed in parallel to the ground, the approximate standard of the rated load is 25% (reference value)
The inner rail is likely to be removed from the outer rail if the load applied exceeds the above reference value, or a load is applied to a gravity position away from the center of the rail when the slide rail is installed in parallel. Please experiment and confirm in advance before using it.

■ Precautions for use of Slide Rails
∙ Example of Slide Rails installation direction

Rail Length L	Stroke ST	A	B	C	D
200	231	－	－	145	160
250	280			195	210
300	329		160	245	260
350	379		210	295	310
400	428		260	345	360
450	477	205	310	395	410
500	526	230	360	445	460

Use M4 round head screws or small clamping screws for mounting slide rails.
When it is installed horizontally, the load capacity is reduced to about 25% of the rated value (reference).