Oil Free Bushings Flange Integrated Type Copper Alloy Center Flanged Type
Brand :
MISUMI
Caution
Product Description
- Oil Free Bushings Flange Integrated Type Copper Alloy Center Flanged Type, E-MUCTZ / E-MUCZ from MISUMI.
- Recommended mating shaft for I.D. of Copper oil-free bushing are d8: General use (High Load), e7: General use (Light Load), f8: High precision use, g6: High precision use (Intermittent operation).
- The Copper oil-free bushing E-MUCTZ / E-MUCZ series is made of High tensile brass alloy with solid lubricant embedded.
- It is recommended to fix the bushing with anti-rotation screw.
- Accessories: Low head hexagon socket head screws 2 to 4 pcs.
Dimensional Drawing of Oil Free Bushings
Specification Table of Oil Free Bushings
Follow the selection procedure Oil Free Bushings
～
to select the type and parameters before ordering.Part Number (Type of Oil Free Bushings· d) | - | L |
| E-MUCTZ | - | 20 |
| Part Number of Oil Free Bushings | L | Dh7 | Da | L1 | H | T | t | d1 | d2 | P.C.D. | F | A | Accessories Low head hexagon socket head screws (Economy series without fittings) | ||||||||||
| Type of Oil Free Bushings | dF7 | ||||||||||||||||||||||
| Center Flanged Type - H Type E-MUCTZ | 8 | +0.028 +0.013 | 20 | 12 | 0 -0.018 | 11.5 | 5 | 27 | 4 | 2.2 | 3.5 | 6 | 19 | - | 19 | M3-10×2 | |||||||
| 10 | 25 | 14 | 13.5 | 6 | 29 | 21 | 21 | ||||||||||||||||
| 12 | +0.034 +0.016 | 25 | 18 | 17.5 | 36 | 5 | 3 | 4.5 | 7.5 | 26 | 26 | M4-12×2 | |||||||||||
| 16 | 35 | 40 | 22 | -0.021 | 21.5 | 40 | 30 | 18 | 24 | M4-12×4 | |||||||||||||
| 20 | +0.041 +0.020 | 50 | 28 | 27.5 | 8 | 49 | 6 | 3.7 | 5.5 | 9 | 38 | 22 | 31 | M5-16×4 | |||||||||
| 25 | 60 | 33 | 0 -0.025 | 32.5 | 54 | 43 | 25 | 35 | |||||||||||||||
| 30 | 70 | 38 | 37.5 | 10 | 63 | 8 | 4.2 | 6.6 | 11 | 50 | 30 | 40 | M6-20×4 | ||||||||||
| 40 | +0.050 +0.025 | 80 | 50 | 49.5 | 13 | 82 | 10 | 5.2 | 9 | 14 | 66 | 38 | 54 | M8-25×4 | |||||||||
| Part Number | L | Dh7 | Da | L1 | H | T | t | d1 | d2 | P.C.D. | F | A | Accessories Low head hexagon socket head screws (Economy series without fittings) | ||||||||||
| Type | dF7 | ||||||||||||||||||||||
| Center Flanged Type - Round Flanged E-MUCZ | 16 | +0.034 +0.016 | 30 | 22 | 0 -0.021 | 21.5 | 6 | 40 | 5 | 3 | 4.5 | 7.5 | 30 | 18 | 24 | M4-12×4 | |||||||
| 20 | +0.041 +0.020 | 50 | 28 | 27.5 | 8 | 49 | 6 | 3.7 | 5.5 | 9 | 38 | 22 | 31 | M5-16×4 | |||||||||
| 25 | 60 | 33 | 0 -0.025 | 32.5 | 54 | 43 | 25 | 35 | |||||||||||||||
[ ! ]Precautions for use of Oil Free Bushings
·Recommended matching shaft for I.D. F7 type d8: General use (high load) f8: High accuracy use e7: General use (light load) g6: High accuracy use (intermittent operation)
·It is recommended to fix the bushing with anti-rotation screw.
[ M ] Material of Oil Free Bushings: High strength brass alloy
Embedded solid lubricant
[ A ] Accessories: Low head hexagon socket head screws 2 to 4 pcs
Product Overview of Oil Free Bushings
1. This is an Oil Free Bushings bush based on high-strength brass.
2. Can withstand greater heavy loads than ball bearings.
3. It can be used in ‘high’ and ‘low temperature’ temperature conditions.
4. Compared to ball bearings, the bush thickness is thinner and saves space.
5. Applicable to linear motion and rotary motion.
2. Can withstand greater heavy loads than ball bearings.
3. It can be used in ‘high’ and ‘low temperature’ temperature conditions.
4. Compared to ball bearings, the bush thickness is thinner and saves space.
5. Applicable to linear motion and rotary motion.
Product Features of Oil Free Bushings
Feature 1: This product is a fusion of solid lubricant based on high-strength brass.
Feature 2: Best suited for use in medium load, low speed driving conditions.
Feature 3: It can demonstrate excellent wear resistance in areas where oil film formation is difficult, such as reciprocating motion and frequent starting and stopping.
■Precision positioning with 7 levels of inner diameter tolerance is more accurate
・Oil Free Bushings, Misumi economic type has the same inspection standards as MISUMI standard products, and quality inspection is performed before factory shipment to provide products suitable for users.
■Comparison of specifications (take straight type as an example) 
Feature 2: Best suited for use in medium load, low speed driving conditions.
Feature 3: It can demonstrate excellent wear resistance in areas where oil film formation is difficult, such as reciprocating motion and frequent starting and stopping.
■Precision positioning with 7 levels of inner diameter tolerance is more accurate
・Oil Free Bushings, Misumi economic type has the same inspection standards as MISUMI standard products, and quality inspection is performed before factory shipment to provide products suitable for users.
■Comparison of specifications (take straight type as an example)
Specification Overview of Oil Free Bushings
- When assembling, be careful to remove foreign substances from the surface.
- Applying lubricant to the grinding part before assembly can shorten the break-in period and is advantageous for machine operation.
- During assembly, operate slowly and knocking is strictly prohibited to avoid damaging the bearing and causing deformation.
Use Cases of Oil Free Bushings
Caution of Oil Free Bushings
Model selection and precautions for use of Oil Free Bushings
Combined design
- MISUMI miniature ball bush units are recommended to use heat-treated shafts.
- It is recommended to select the holder tolerance as H7 for Misumi miniature ball bushing units.
| Shaft diameter tolerance | Holder diameter tolerance | ||
| Measurement | Measurement Tolerance | Holder Diameter | H7 |
| 2 | 0 -0.005 | 7∼10 | +0.015 0 |
| 3 | |||
| 4 | 11∼14 | +0.018 0 | |
| 5 | |||
| 6 | 15∼18 | +0.018 0 | |
| 8 | |||
| 10 | 19∼24 | +0.021 0 | |
| 12 | |||
Machining heat treatment range of Oil Free Bushings
The shaft is heat-treated and then machined.Due to heat treatment, the hardness of the female screw machining part ± 10mm before and after may decrease (see example below).
In addition, the heat treatment area is not within the guaranteed range of the outer diameter dimensional tolerance.When calculating the stroke, subtract the dimensions of the heat treated part.
Lubrication of Oil Free Bushings
When shipping miniature ball bushings, anti-rust oil is applied. Please wash and dry them, then apply grease before use.
Depending on the usage environment, replenish lithium soap-based grease (such as Alubania Grease S2 made by Showa Shell Sekiyu) as needed.
Brand Introduction
Since its establishment in 1963 in Japan, MISUMI Group Inc. has been providing customers with a wide range of high quality parts such as FA factory automation parts, mold parts, electronic parts, tools and consumables in a fast and accurate manner. We have created a low-cost business model by compiling our own catalogs and establishing a marketing system to sell our products directly, and we continue to develop MISUMI branded products with a high level of quality by developing an annual product plan based on customer feedback and requests. MISUMI has been established in China since June 2003 as MISUMI Precision Machinery Co., Ltd. and later changed its name to MISUMI (China) Precision Machinery Trading Co., Ltd., headquartered in Shanghai. Since the launch of the stamping mold standard parts business, we have started the official business of FA standard parts, plastic mold standard parts and machining tools, and achieved rapid development and growth of MISUMI business in China with support from our customers. China's manufacturing market is one of the most competitive in the world because of its unlimited prospects. Thus was born MISUMI's business philosophy - the key to the future of manufacturing in China is cost competitiveness as well as "quality" and "time".
Product Overview
1. Low maintenance frequency.
2. More resistant to heavy loads than rolling bearings.
3. Can be used under severe conditions of "high" and "low" temperatures.
4. Bushings are thin and space-saving, compared to rolling bearings.
5. Can be used for linear and rotary motions.
2. More resistant to heavy loads than rolling bearings.
3. Can be used under severe conditions of "high" and "low" temperatures.
4. Bushings are thin and space-saving, compared to rolling bearings.
5. Can be used for linear and rotary motions.
Product Features
Feature 1: A composite product based on high strength brass embedded with solid lubricant.
Feature 2: Ideal for use in heavy-duty and low-speed operating conditions.
Feature 3: Excellent wear resistance in areas where it is difficult to form an oil film, such as reciprocating movements and frequent starts and stops.
*Products circulating on the market are similar products randomly purchased by our company from online or offline markets.Feature 2: Ideal for use in heavy-duty and low-speed operating conditions.
Feature 3: Excellent wear resistance in areas where it is difficult to form an oil film, such as reciprocating movements and frequent starts and stops.
■I.D. tolerance precision class 7 ensures more accurate locating.
・Even for MISUMI economy series, the inspection standard is the same as that of MISUMI standard products, and factory inspection is carried out to provide users with products that meet the catalog specifications.
・Even for MISUMI economy series, the inspection standard is the same as that of MISUMI standard products, and factory inspection is carried out to provide users with products that meet the catalog specifications.
■Specification Comparison (Taking the straight type as an example)
・R chamfer, which facilitates installation
・The standard load and operating speed of the catalog are ensured, so it can be used with peace of mind.
・R chamfer, which facilitates installation
・The standard load and operating speed of the catalog are ensured, so it can be used with peace of mind.
Specifications Overview
- When assembling, check that there are no foreign objects on the surface.
- The sliding surface may become black or grey-black after use due to the oil film formed by the solid lubricant. Do not scrub it and use as usual.
- Before assembly, if the lubricant is applied to the grinding parts, it can shorten the running-in period and facilitate the operation of the machine.
- When assembling, it should be pressed in slowly. Knocking is strictly prohibited to avoid damaging the bearings and causing deformation.
Example of Use
■Use of cylinders without locking and braking devices
Precautions
