Detachable Hinges, Low Dust Heavy Load Type
Brand :
MISUMI
Caution
Product Description
Economy series Low Dust Heavy Load Hinges Example Use
Product Overview
Name: Economy series Low Dust Heavy Load Hinges
Feature: Maximum allowable load 650N (2 pcs used), stainless steel butterfly hinges with counterbored holes.
Feature: Maximum allowable load 650N (2 pcs used), stainless steel butterfly hinges with counterbored holes.
Dimensional Drawing
 Material |  Surface Treatment | |
| Body | SUS316 | Buffed |
| Bushing | Abrasion Resistant Polyacetal | － |
Specification Table
| Part Number | Number of holes on one side | L | W | W1 | L1 | T | R | t | D | d | Mass (g) |
| Type | |||||||||||
| E-HNZL (Left Pull-Out Type) | 2 | 50 | 50 | 35 | 20 | 14 | 6.75 | 5 | 8.6 | 4.6 | 120 |
| 65 | 65 | 40 | 35 | 9.6 | 5.6 | 185 | |||||
| E-HNZR (Right Pull-Out Type) | 75 | 75 | 50 | 40 | 16 | 7.75 | 6 | 10.6 | 6.6 | 270 | |
| 3 | 100 | 100 | 60 | 30 | 450 |
Product Features
■Flat Hinges, Excellent anti-rust performance thanks to the use of SUS316 material
■Detachable, easy to install, excellent operational performance
■Not susceptible to dust generation
Rotational parts are equipped with bushings to prevent wear and tear and metal powder splattering due to contact among metal parts
Bushings are made of abrasion-resistant polyacetal, not susceptible to dust generation, better abrasion resistance and sliding performance than general butterfly hinges
Result of dust concentration test (micro-dust with the diameter of 2.5um or less)
■Detachable, easy to install, excellent operational performance
■Not susceptible to dust generation
Rotational parts are equipped with bushings to prevent wear and tear and metal powder splattering due to contact among metal parts
Bushings are made of abrasion-resistant polyacetal, not susceptible to dust generation, better abrasion resistance and sliding performance than general butterfly hinges
Result of dust concentration test (micro-dust with the diameter of 2.5um or less)
Precautions
Flat Hinges, Please pay attention to whether the hinge slot matches with the height, width, and thickness of the hinge during installation. And check whether the hinge matches with the screw and fastener connected to it.
Example of Use
Economy series Low Dust Heavy Load Hinges Example Use
Related Products
| Recommended product I | Recommended product II | |
| Toggle Clamps Horizontal, Hold Down Pressure 300N, T-Handle | Economy series Metal magnetic catch Vertical fixed type | |
 |  |
Dimensional Drawing
 Material |  Surface Treatment | |
| Body | SUS316 | Buffed |
| Bushing | Abrasion Resistant Polyacetal | － |
Specification Table
| Part Number | Number of holes on one side | L | W | W1 | L1 | T | R | t | D | d | Mass (g) |
| Type | |||||||||||
| E-HNZL (Left Pull-Out Type) | 2 | 50 | 50 | 35 | 20 | 14 | 13.5 | 5 | 8.6 | 4.6 | 120 |
| 65 | 65 | 40 | 35 | 9.6 | 5.6 | 185 | |||||
| E-HNZR (Right Pull-Out Type) | 75 | 75 | 50 | 40 | 16 | 15.5 | 6 | 10.6 | 6.6 | 270 | |
| 3 | 100 | 100 | 60 | 30 | 450 |