[Clean & Pack] Rotary Shaft - End Shape Selectable

Brand :

MISUMI

Caution

See here for related information such as technical information on cleaning effects and other cleaned product lineups.
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product. Please be careful about the application location and storage environment.

Product Description

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■Part Number for Clean & Pack Products

·Degreasing (Anti-rust single packing)	: Part Number SL-□□
·Precision cleaning (Degassing double packing)	: Part Number SH-□□
·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Material shape (Both shaft ends A shape)
Rotary Shaft - End Shape Selectable: Dimensional Drawing

[ ! ] (Y) ≤ D × 50 is required for (Y) dimension.
[ ! ] When only one end needs to be machined, select A Shape for the other end
.
[ ! ] When L dimension is less than the tap pilot hole depth, the pilot hole might go through.
　
[ ! ] H and J will not be symmetrical when applied to both ends of the shaft.
[ ! ] H and J may be out of phase with other alterations.
[!] Retaining ring is not included for F and G machining. Please note this.

Left End Shape

Right End Shape

Machining Conditions

—

For M3 to 8
M ≤ D−2
For M10 to 16
M ≤ D−3
For M20, 24
M ≤ D−4
For M30
M ≤ D−5

P (Q) = M (N)
Specify M (N) Dimension.
Specification of P(Q) dimension is not required.

—

For M3 to 8,
M(N) ≤ P(Q) - 2
For M10 to 16,
M(N) ≤ P(Q) - 3
For M20 or 24,
M(N) ≤ P(Q) - 4
For M30,
M(N) ≤ P(Q) - 5

D dimension, 27, 31, 33, 34
36·37·38·39·41
42·43·44·46·47
48 and 49 cannot be specified

P, Q dimensions, 27, 31, 33, 34
36·37·38·39·41
42·43·44·46·47
48 and 49 cannot be specified

Applicable when D ≤ 30

R(W) - M(N) ≥ t
D－R－M ≥ 2
D－W－N ≥ 2

M (N)	tmin
4 to 5	0.8
6 to 12	1.0

Tap Depth
M × 2
N × 2

Type	[M] Material	Cleaning Method
		Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-SSFR□□	SUS304	Degreasing	General environment	Anti-rust packing	General environment
SH-SSFR□□		Precision cleaning	Class 1,000	Degassing double packing	Class 10
SHD-SSFR□□		Electrolytic polishing + precision cleaning

[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[!] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the

specification table.