Leveling Mounts Metal Pad With Positioning Holes

Adjuster Bolt, Economy series Leveling Mounts With Hole Positioning Type
A leveling mount with high quality, cheap price and excellent cost performance
 

Specifications Overview of Adjuster Bolt

The bottom of the product is hollow

Part Number		M	A	L	ℓ1	ℓ2	B	Vertical Load(kN)
Type	D
E－FJWNQ	75	12	50	73	8	10	19	3
			100	123
			150	173
		16	50	75	10	13	24	6
			100	125
			150	175
		20	100	128	13	16	30	7
			150	178

Note 1) “Allowable load” in this specification table is for the vertical direction only

■MISUMI economy series load assurance
・The load of MISUMI economy series leveling mount is clearly indicated, and it is guaranteed by third-party testing for more assured use. Test results of allowable load according to GB standard

Recommended leveling mount installation method
On the premise of ensuring safety, raise the equipment with a forklift (light equipment can roll the equipment sideways) to a height that is convenient to screw into the inner teeth.
Screw in the leveling mount through threads. After assembling the required number of leveling mounts, lower the forklift and adjust horizontally.

Precautions
1. Check whether the screw can be mounted with female thread (it is recommended to re-tap after coating the threads).
2. The selection leveling mount should be screwed in more than half of the thread as far as possible (the shorter thread screwed in, the greater the bearing capacity).
3. For heavy equipment, it is recommended to add lubricating grease to threads for easy adjustment.