Leveling Mounts Metal Body, Universal Type

Adjuster Bolt, Economy series Leveling Mounts Metal Universal Type
A leveling mount with high quality, cheap price and excellent cost performance
 

Width D	Thread Specification M	Thread Length A	Body Height L	ℓ1	ℓ2	E	H	B	Allowable Load (KN)
80	16	100	135.5	10	13	21.5	10	24	10
		150	185.5
	20	100	138.5	13	16			30	15
		150	188.5
		180	218.5
100	20	100	141.5	13	16	24.5	13	30	20
		150	191.5
		180	221.5
	24	100	142.5	14	19			36	25
		150	192.5
		180	222.5

Note 1) “Allowable load” in this specification table is for the vertical direction only

【Features of Adjuster Bolt】
No height adjustment knob.

【Material Table of Adjuster Bolt】

Type	Material		Surface Treatment
	Screw	Base	Screw	Base
①	Q235(Steel)		Zinc Plating
②	SUS304		Buffed

The bottom of the product is hollow

Width D	Thread Specification M	Thread Length A	Body Height L	ℓ1	ℓ2	E	H	B	Allowable Load (KN)
80	16	100	135.5	10	13	21.5	10	24	10
		150	185.5
	20	100	138.5	13	16			30	15
		150	188.5
		180	218.5
100	20	100	141.5	13	16	24.5	13	30	20
		150	191.5
		180	221.5
	24	100	142.5	14	19			36	25
		150	192.5
		180	222.5

Note 1) “Allowable load” in this specification table is for the vertical direction only

■MISUMI economy series load assurance
・The load of MISUMI economy series leveling mount is clearly indicated, and it is guaranteed by third-party testing for more assured use.
Test results of allowable load according to GB standard

Recommended leveling mount installation method
On the premise of ensuring safety, raise the equipment with a forklift (light equipment can roll the equipment sideways) to a height that is convenient to screw into the inner teeth.
Screw in the leveling mount through threads. After assembling the required number of leveling mounts, lower the forklift and adjust horizontally.

Precautions
1. Check whether the screw can be mounted with female thread (it is recommended to re-tap after coating the threads).
2. The selection leveling mount should be screwed in more than half of the thread as far as possible (the shorter thread screwed in, the greater the bearing capacity).
3. For heavy equipment, it is recommended to add lubricating grease to threads for easy adjustment.