Sliding Door Dedicated Frames

1. Complies with the GB industrial aluminum profile standard, with 8 to 10μ clear anodized surface for scratch resistance.
2. A protective film is applied to the profile surface to prevent bumps and friction during transportation.
3. Free cutting to any specified length in 0.5 mm units within the range of 50 mm to 4000 mm.
4. Supports various alterations such as drilling and bevel cutting.
5. The European standard economy series profile product has a different profile cross-section shape compared to MISUMI's existing products. The specification comparison is as follows:

Sliding door dimensional drawing

 

Type	Material	Surface treatment
LSDF-2	6063-T5	Clear anodized
LSDF-3		Clear anodized

[Specification]
The specification table includes information such as the specified length range, unit, weight/meter, and inertial intercept.
  

Type	Total length L	Profile type	Weight kg/m
LSDF-2	50–4000 (specified unit 0.5 mm)	2 slots	0.56
LSDF-3		3 slots	0.73

*Any specified length between 50–4000 mm can be freely cut in increments of the specified unit 0.5 mm at no additional charge.

		Type	-	L	-	(LTP·RTP·TPW)
		LSDF2	-	1000	-	LTP

1. The profile surface is covered with a protective film. Due to adhesion from the glue, a small amount of aluminum debris may remain. This is not a quality problem, and all aluminum debris will be removed once the protective film is taken off.
2. European standard aluminum alloy profiles and MISUMI's existing Japanese material aluminum profile accessories are not compatible. It is recommended to use the economical European standard accessories starting with 'L':

Accessory type	Recommended model 1	Recommended model 2	Recommended model 3	Recommended model 4
Nut	LNTN8-30-6-100P	LNHRN8-30-6-100P	LNSN8-30-6-100P	LTTB8-8-20-100P