Adjusting Stopper Screws, Coarse Thread, Hex Socket

Brand :

MISUMI

Caution

Product Description

·Screws and nuts are not assembled for shipment. · Full thread series
· Individually sold
· Coarse · S45C and SUS304 materials
· S45C trivalent chromate surface treatment

Product Overview

・The front end of the Adjustment Screws has a round shape, mainly used for adjusting the position of workpieces.
・Available with two materials : steel S45C and stainless steel SUS304.

Product Features

Feature 1 Adjustment Screws can be used to adjust the the workpiece position slightly through the adjusting screw, so as to play the role of precise positioning.
Feature 2 The overall heat treatment (HRC35~42) has reduced abrasion caused by contact with workpiece.
Feature 3 Unlike a flat end bolt, the front end round head makes point contact with the workpiece, thus absorbing the inclination of the tapped hole.
Feature 4 Adjustment Screws coarse or fine thread pitch is available. Choose the fine thread type when slight adjustment is required.
Feature 5 A nut for fixing the Adjustment Screws is included. Therefore, it can be fixed after purchasing the adjusting screw components.

Dimensional Drawing

Adjusting Screw	Type	Material	Surface Treatment	Hardness
Coarse Thread	E-ANBN	S45C	Trivalent Chromate Treatment	35～42HRC
Coarse Thread	E-ANBNS	SUS304	－	－

* The hardness is high due to overall quenching. Do not use them in special applications requiring frequent collisions.

Specification Table

■ Dimension Specification Table

Part Number		L
Type	M	L
(Coarse Thread) E-ANBN E-ANBNS	3	10	15	20	25	30	35	40
	4	10	15	20	25	30	35	40	45	50	60
	5	10	15	20	25	30	35	40	45	50	60
	6		15	20	25	30	35	40	45	50	60
	8			20	25	30	35	40	45	50	60
	10				25	30	35	40	45	50	60	70	80	90	100
	12					30	35	40	45	50	60	70	80	90	100
	16							40	45	50	60	70	80	90	100	120*
	20										60	70	80	90	100	120*

Product customization is available for dimensions not listed in the table of specifications. Only S45C products are available for dimension L with *.

M	M×Pitch		B1	ℓ	SR	B	(C)	T
M	Fine Thread	Coarse Thread	B1	ℓ	SR	B	(C)	Fine Thread	Coarse Thread
3	3×0.35	3×0.5	1.5	1.5	3	5.5	6.4	2.4	2.4
4	4×0.5	4×0.7	2	2.2	4	7	8.1	4	3.2
5	5×0.5	5×0.8	2.5	2.8	5	8	9.2	4	4
6	6×0.75	6×1.0	3	3	6	10	11.5	4	5
8	8×0.75	8×1.25	4	4	8	13	15	5	6.5
10	10×1.0	10×1.5	5	5	10	17	19.6	6	8
12	12×1.0	12×1.75	6	6	12	19	21.9	6	10
16	16×1.5	16×2.0	8	7	16	24	27.7	8	13
20	20×1.5	20×2.5	10	8	20	30	34.6	10	16

Usage Method

Product Drawings	Detailed Description about Adjustment Screws usage
	Due to the Adjustment Screws use of a front end round head (SR) shape type, it can absorb the eccentricity caused by the inclination of thread machining. Therefore, only one point can be used as a support for positioning.
	Adjustment Screws has the overall heat treatment, there is little wear even after repeated contact caused by collision during positioning.
	Using Adjustment Screws two adjustment bolts simultaneously on one side of the workpiece can easily achieve lateral positioning.
	Adjustment Screws front end is quenched. If it is necessary to avoid damaging the workpiece during positioning, it is recommended to use it in conjunction with theset pin.

Example of Use

Adjustment Screws, The economy series products are of high hardness due to overall quenching. Do not use them in applications involving frequent collisions.

Related Industries

Smart Phones	Electronic & Electrical	Lithium battery

Automotive	Robotics	Medical