[Clean & Pack]Sheet Metal Mounting Plates / Brackets - Convex Bent Type, BLUFS
Brand :
MISUMI
Caution
- See here for related information such as technical information on cleaning effects and other cleaned product lineups.
- Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Product Description
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
| · Degreasing (Anti-rust single packing) | : Part Number SL-□□ |
| · Precision cleaning (Degassing double packing) | : Part Number SH-□□ |
| · Electrolytic polishing + precision cleaning (Degassing double packing) | : Part Number SHD-□□ |
| Product Part Number | Cleaning Method | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Process |
| SL-□□ | Degreasing | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| SH-□□ | Precision cleaning | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| SHD-□□ | Electrolytic polishing + precision cleaning | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Convex bent type sheet metal bracket selectable from steel, aluminum, and stainless steel. General purpose hole patterns are available. Dimension configurable.
![[Clean & Pack]Sheet Metal Mounting Plates / Brackets - Convex Bent Type, BLUFS: Related Image](http://my.misumi-ec.com/linked/item/10310756539/img/drw_01.gif)
[ ! ] Green colored parameters can be omitted.
If the parameter setting is omitted, the holes will be evenly distributed about the center.
If the parameter setting is omitted, the holes will be evenly distributed about the center.
| ■Hole Type Selection Chart | |||
| Hole Type | Bolt Hole | Tapped Hole (Coarse) | Through Hole |
| Code | N・NA | M·MA | D |
| Shape Diagram | ![[Clean & Pack]Sheet Metal Mounting Plates / Brackets - Convex Bent Type, BLUFS](http://content.misumi-ec.com/image/upload/t_msmwm_wyg/v1/p/jp/product/wysiwyg/110310756539/110310756539_004_20230801115853.gif) | ![[Clean & Pack]Sheet Metal Mounting Plates / Brackets - Convex Bent Type, BLUFS](http://content.misumi-ec.com/image/upload/t_msmwm_wyg/v1/p/jp/product/wysiwyg/110310756539/110310756539_005_20230801115853.gif) | ![[Clean & Pack]Sheet Metal Mounting Plates / Brackets - Convex Bent Type, BLUFS](http://content.misumi-ec.com/image/upload/t_msmwm_wyg/v1/p/jp/product/wysiwyg/110310756539/110310756539_006_20230801115853.gif) |
| [ ! ] For d dimension, see "N, NA Machining Dimensions" on lower section of specification chart. | |||
■Specifications, Machining Limits
[ ! ] 1. Burr height 0.1 or less
[ ! ] 2. Bend angle tolerance ±1°
[!] 3. Slotted holes may be shaped as shown below depending on dimensions. (The function as a mounting hole is not affected.)
![[Clean & Pack]Sheet Metal Mounting Plates / Brackets - Convex Bent Type, BLUFS](http://content.misumi-ec.com/image/upload/t_msmwm_wyg/v1/p/jp/product/wysiwyg/110310756539/110310756539_002_20230801115853.gif)
[ ! ] 4. There will be some scratches due to sheet metal brake and bulges due to bending.
The bending r value is approx. the same as the plate thickness.
[!] 5. There are machining limits on b, f, g and h shown in below diagram.
![[Clean & Pack]Sheet Metal Mounting Plates / Brackets - Convex Bent Type, BLUFS](http://content.misumi-ec.com/image/upload/t_msmwm_wyg/v1/p/jp/product/wysiwyg/110310756539/110310756539_003_20230801115853.gif)
| Part Number | [M] Material | Cleaning Method | ||||
| Type | Material Symbol | Cleaning Method | Cleaning Environment | Packaging Type | Packing Environment | |
| SL-BLUFS | SUD | SUS304 (2B) | Degreasing | General environment | Anti-rust packing | General environment |
| SH-BLUFS | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | ||
| SHD-BLUFS | Electrolytic polishing + precision cleaning | |||||
[ ! ]See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the
specification table.[ ! ] 4.5, 6.0 thickness type is SPHC material.
App. Example
![[Clean & Pack]Sheet Metal Mounting Plates / Brackets - Convex Bent Type, BLUFS: Related Image](http://content.misumi-ec.com/image/upload/t_msmwm_wyg/v1/p/jp/product/wysiwyg/110310756539/110310756539_021_20230801115853.gif)