[Clean & Pack]Sheet Metal Mounting Plates / Brackets - Z Bent Type, SWCAS

Brand :

MISUMI

Caution

See here for related information such as technical information on cleaning effects and other cleaned product lineups.
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Product Description

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■Part Number for Clean & Pack Products

· Degreasing (Anti-rust single packing)	: Part Number SL-□□
· Precision cleaning (Degassing double packing)	: Part Number SH-□□
· Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Z bent type sheet metal bracket selectable from steel, aluminum, and stainless steel. General purpose hole patterns are available. Dimension configurable.

[ ! ]Green colored parameters can be omitted.　
If the parameter setting is omitted, the holes will be evenly distributed about the center.

■Hole Type Selection Chart

Hole Type	Bolt Hole	Tapped Hole (Coarse)	Through Hole
Code	N・NA	M·MA	D
Shape Diagram
Shape Diagram	[ ! ] For d dimension, see "N, NA Machining Dimensions" on lower section of specification chart.

■Specifications, Machining Limits
[ ! ] 1. Burr height 0.1 or less
[ ! ] 2. Bend angle tolerance ±1°
[!] 3. Slotted holes may be shaped as shown below depending on dimensions. (The function as a mounting hole is not affected.)

[ ! ] 4. There will be some scratches due to sheet metal brake and bulges due to bending.
The bending r value is approx. the same as the plate thickness.
[!] 5. There are machining limits on b, f, g and h shown in below diagram.

Part Number		[M] Material	Cleaning Method
Type	Material Symbol		Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-SWCAS	SUD	SUS304 (2B)	Degreasing	General environment	Anti-rust packing	General environment
SH-SWCAS			Precision cleaning	Class 1,000	Degassing double packing	Class 10
SHD-SWCAS			Electrolytic polishing + precision cleaning

[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ]See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the

specification table.
[ ! ] 4.5, 6.0 thickness type is SPHC material.