[Clean & Pack]Sprockets 11B

Brand :

MISUMI

Caution

See here for related information such as technical information on cleaning effects and other cleaned product lineups.
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Please check the content on our website as the PDF does not contain the most up-to-date information.
Some part numbers may be delivered as a mix of products with a different appearance (with or without engraving), but this is not a problem with the specifications.

Product Description

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■Part Number for Clean & Pack Products

· Degreasing (Anti-rust single packing)	: Part Number SL-□□
· Precision cleaning (Degassing double packing)	: Part Number SH-□□
· Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

In addition to the shaft bore machined type, products with roughly machined shaft bores (S specifications) that can be altered freely are also available.

Shaft Bore Specs.

(Rough Machining)

(Straight Bore + Tap)

Type	[M] Material	Cleaning Method
		Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-SSP11B	SUS304 equivalent	Degreasing	General environment	Anti-rust packing	General environment
SH-SSP11B		Precision cleaning	Class 1,000	Degassing double packing	Class 10
SHD-SSP11B		Electrolytic polishing + precision cleaning

[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the

specification table.
[A]Accessories: One set screw is included. (Only for shaft bore specification [P])
[ ! ] Offset between tooth tip and keyway is ±0.5 mm.
* The S-type shaft bore dia. values are for reference only and actual values may be smaller by 1 mm. (provided with a pilot hole)

■Set Screw (11B)

Number of Teeth	Set Screw
Number of Teeth	M (Coarse)	Pitch
12 to 18	3	0.5
20 to 48	4	0.7