[Clean & Pack]MechaLock - Standard

Brand :

MISUMI

Caution

See here for related information such as technical information on cleaning effects and other cleaned product lineups.
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Product Description

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■Part Number for Clean & Pack Products

· Degreasing (Anti-rust single packing)	: Part Number SL-□□
· Precision cleaning (Degassing double packing)	: Part Number SH-□□
· Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-Rust Packing	Oil removal	General Environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision Cleaning	Degassing Double Packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing Double Packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

*The thread diameter of the removal screw hole is the same as that of the locking screw.

Type	Main Body	Screws	Cleaning Method
Type	[M] Material	[M] Material	Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-MLHS	SUS304	SUSXM7	Degreasing	General Environment	Anti-Rust Packing	General Environment
SH-MLHS	SUS304	SUSXM7	Precision Cleaning	Class 1,000	Degassing Double Packing	Class 10

[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pcs., they are packed in 1 package (incl. 20 pcs.).
[ ! ] See the details of degreasing, precision cleaning and electrolytic polishing shown at the bottom of the

specification table.

Specifications/Overview

■Allowable Load Applied to MechaLock
kgf = N × 0.101972

Type	MLM·MLMB				MLMP			MLHS			Mass (g)
d	Max. Allowable Torque (N⋅m)	Allowable Thrust Load (kN)	Screw Tightening Torque (N⋅m)		Max. Allowable Torque (N⋅m)	Allowable Thrust Load (kN)	Screw Tightening Torque (N⋅m)	Max. Allowable Torque (N⋅m)	Allowable Thrust Load (kN)	Screw Tightening Torque (N⋅m)
d	Max. Allowable Torque (N⋅m)	Allowable Thrust Load (kN)	MLM	MLMB	Max. Allowable Torque (N⋅m)	Allowable Thrust Load (kN)	Screw Tightening Torque (N⋅m)	Max. Allowable Torque (N⋅m)	Allowable Thrust Load (kN)	Screw Tightening Torque (N⋅m)
5	7	2.8	1.9	1.6	4.6	1.84	1.9	2.8	1.13	0.88	18
6	14	4.67	3.9	3.2	10.7	2.49	3.9	7.8	2.54	2.7	26
8	22	5.6			16.6	4.1		10.7	2.64		35
10	25	5.6			19.6	3.9		12.7	2.55		40
11	30	5.6			22.5	4		14.7	2.64		45
12	50	8.41			36.2	5.9		24.5	4.02		53
14	65	9.46			50.9	7.2		28.4			61
15	70	9.46			54.8	7.2		30.4			66
16	75	9.46			58.8	7.3		32.3			75
17	110	12.6			76.4	8.9		46.1	5.39		75
18	115	12.6			80.3			49			80
19	120	12.6			85.2			51.9			81
20	220	21.6	8.8	7.5	183	18.3	8.8	121.6	12.16	5.6	144
22	290	26			201	18.3		133.4	12.06		165
24	320	26			252	21		146.1	12.16		180
25	350	27.2			264	21.1		153	12.16		188
28	380	27			295	21.1		213.8	15.2		195
30	410	27			396	26.4		229.5	15.3		208
32	440	27			423	26.4		244.2	15.2		219
35	720	41.1	15.7	12.7	548	31.3	15.7	301.1	17.16	9.6	325
38	770	40.2			741	39		409	21.48		362
40	810	40.2			779	39		430.6			380
42	850	40.2			823	39.2		452.2			405
45	1200	52.9			882	39.2		484.6			435
48	1200	48.2			1117	46.5		620.9	25.8		460
50	1500	56.3			1362	54.4		754.3	30.11		485
55	1600	56.3			1512	55		-	-	-	520
60	1900	60.3			1768	58.9					560
65	2000	60.3			1915	58.9					610
70	3400	94.8	37.3	31	2920	83.6	37.3				845
75	3900	101.5		-	-	-	-				932
80	4100	101.5									1100
85	4400	101.5									1270

■Shaft / Hub Rigidity
kgf/mm² = MPa×0.101972

d	MLM·MLMB						MLMP						MLHS
	Shaft Side Surface Pressure Mpa	Hub Side Surface Pressure MPa	H Hub Minimum O.D.			Hub Machining Depth L₁	Shaft Side Surface Pressure Mpa	Hub Side Surface Pressure MPa	H Hub Minimum O.D.			Hub Machining Depth L₁	Shaft Side Surface Pressure Mpa	Hub Side Surface Pressure MPa	H Hub Minimum O.D.			Hub Machining Depth L₁
			Yield Point Stress of Hub Material (MPa)						Yield Point Stress of Hub Material (MPa)						Yield Point Stress of Hub Material (MPa)
			206	294	392				206	294	392				206	294	392
			FC350 SS400 S10C	FCD450 S35C	FCD600 S55C				SUS304 SS400 S10C	S35C	SUS403 S55C				SUS304 SS400 S10C	S35C	SUS403 S55C
5	249	81	25	22	20	13	217	51	21	20	19	13	175	42	20	19	18	13
6	318	102	33	28	25	14	258	59	26	24	23	14	251	58	26	24	22	14
8	239	107	38	31	28	15	244	92	35	29	27	15	196	62.6	28	26	25.5	15
10	186	96	39	33	30	16	192	77	35	31	29	16	153	55.9	29	27.5	27.5	16
11	170	92	39	34	31	16	174	73	36	31	30	16	139	53.6	30	28.5	28.5	16
12	233	115	49	40	36	17	239	91	43	36	33	17	191	67.1	35	32	30.5	17
14	225	120	55	44	39	17	204	84	44	38	35	17	164	62.3	36	34	32.5	17
15	186	106	52	43	39	18	205	90	47	40	37	18	136	55	37	34	33.5	18
16	166	98	51	43	39	18	193	87	48	41	38	18	121	50.9	38	35	35	18
17	197	121	61	49	43	19	205	97	53	44	40	19	144	63.1	40	37	36	19
18	186	118	62	49	44		166	93	54	45	41		136	61.2	40	37	36
19	177	114	62	50	45		184	91	55	46	42		129	59.2	42	39	38
20	234	139	87	64	56	23	213	97	64	54	49	23	165	69.8	51	47	44	23
22	256	159	112	74	62	23	193	92	65	56	51	23	150	66.3	53	49	46	23
24	217	142	98	72	62	24	121	105	74	61	56	24	128	59.2	54	50	48	24
25	216	137	96	72	62	25	212	102	75	62	57	25	122	54.5	54	51	49	25
28	192	127	95	74	65		212	107	82	68	61		136	63.7	60	55	53
30	179	122	95	75	67		198	102	86	69	63		127	61.1	62	57	55
32	156	110	91	75	67	26	192	103	87	73	66	26	110	55.4	63	59	57	26
35	204	138	129	95	83	28	207	105	100	83	75	28	107	51.4	72	67	67	28
38	178	125	122	95	84	28	208	110	109	89	80	28	119	59.5	79	73	70	28
40	164	118	119	95	85	29	202	110	113	92	83	29	110	56.2	80	74	72	29
42	156	114	120	97	87	29	192	106	114	94	85	29	105	54.4	82	76	74	29
45	186	140	154	113	98	30	184	104	117	97	88	30	95	50.8	85	79	77	30
48	159	123	140	110	97		206	118	135	108	96		107	58.4	91	84	81
50	173	136	160	119	104		202	119	140	111	99		116	64.6	97	88	84
55	158	127	159	123	108	31	185	106	137	113	102	31	-	-	-	-	-	-
60	150	125	166	130	115		176	104	143	119	108
65	139	118	167	134	119		163	98	146	124	113
70	187	152	250	172	147	34	206	119	188	150	133	34
75	187	155	272	238	155	34	-	-	-	-	-	-
80	166	142	250	225	157	35
85	157	135	246	224	161	35

■ Features
(1) With the pilot on flange of the inner ring, tightening of the locking screw presses the hub I.D.. This generates effect to control instability on the hub end face and O.D. (centering effect).
(2) Free phase adjustment and positioning.
(3) No hub movement in axial direction when tightened with locking screw.
(4) No backlash after tightening.

■Recommended Tolerance of Shaft and Hub / Roughness of Surface

Shaft O.D.	h7 (g6)	Ra 1.6 or less
Hub I.D.	H7	Ra 3.2 or less