Indexing Plungers Switch Lever
Brand :
MISUMI
Caution
Product Description
Product Overview
Indexing Plungers Switch Lever
♢Indexing plunger, also known as indexing pin, is a locating pin that can be inserted and pulled out manually. Suitable for fixture indexing, positioning, stop limit and other occasions. It is generally divided into two types: reset and self-locking type.
♢Indexing plunger, also known as indexing pin, is a locating pin that can be inserted and pulled out manually. Suitable for fixture indexing, positioning, stop limit and other occasions. It is generally divided into two types: reset and self-locking type.
Dimensional Drawing
Specification Table
Indexing Plungers Switch Lever
Material Specification
| Part Number | Thread Pitch | D | D1 | S | B | L | L1 | L2 | L3 | L4 | SW1 | SW2 | A | P | R | Load (N) | |||
| Type | M | Coarse | Fine | ||||||||||||||||
| min. | max. | ||||||||||||||||||
| (Coarse) E-LPMXSR (Fine) E-LPXSR | 12 | 1.75 | 1.5 | 30 | 16.1 | 6 | 6 | 74 | 20 | 6 | 18 | 6 | 14 | 19 | 30 | 6 | 3.5 | 17 | 50 |
| 16 | 2 | 1.5 | 40.5 | 21.9 | 8 | 8 | 99.9 | 26 | 8 | 24.9 | 8 | 19 | 24 | 41 | 8 | 4.5 | 27 | 45 | |
| 20 | 2.5 | 1.5 | 49.5 | 27.7 | 10 | 10 | 123 | 33 | 10 | 30 | 10 | 24 | 30 | 50 | 10 | 6 | 39 | 90 | |
Material Specification
| Type | Thread | Knob Type | Body | Pin | Spring | Lock Nuts | ||||||
 Material | Treatment | Material |  Surface Treatment | Material | Surface Treatment |  Hardness | Material | Material | Surface Treatment | |||
| E-LPMXSR | Coarse | S45C | Black Oxide | 1215 | Black Oxide | S45C | Black Oxide | 45~55HRC | SUS304 | S35C | Black Oxide | |
| E-LPXSR | Fine | |||||||||||
Product Features
♢ This series is a handle type.
♢ Turning the handle controls the pin in and out, allowing for use where there is no room for the knob to be pulled out. Turning the handle 180 degrees places the pin inside the body and locks the handle with the groove.
♢ The plunger has a simple structure: the tip is pushed out through a fixed stroke by the internal spring and it can be released by pressing in the ball or the pin against the elastic force.
♢ Turning the handle controls the pin in and out, allowing for use where there is no room for the knob to be pulled out. Turning the handle 180 degrees places the pin inside the body and locks the handle with the groove.
♢ The plunger has a simple structure: the tip is pushed out through a fixed stroke by the internal spring and it can be released by pressing in the ball or the pin against the elastic force.