Indexing Plungers Vertical Flanged, Rotary Lever
Brand :
MISUMI
Caution
Product Description
Product Overview
Indexing Plungers Vertical Flanged, Rotary Lever
●Indexing plunger, also known as indexing pin, is a locating pin that can be inserted and pulled out manually. Suitable for fixture indexing, positioning, stop limit and other occasions.
●Indexing plunger, also known as indexing pin, is a locating pin that can be inserted and pulled out manually. Suitable for fixture indexing, positioning, stop limit and other occasions.
Dimensional Drawing
Specification Table
Specification Table
Material Specification
| Part Number | Handle Rotating Direction | W | W1 | S | D1 | L | L1 | L2 | L3 | L4 | P | H | H1 | A | SW | d | Load (N) | ||
| TYPE | D | min. | max. | ||||||||||||||||
| E-LZAU54 | 8 | L (Left-Hand) R (Right-Hand) | 48 | 20 | 14 | 37 | 69 | 35 | 12 | 18 | 7.5 | 34 | 20 | 7.5 | 10 | 6.1 | 6.1 | 12 | 40 |
| 10 | |||||||||||||||||||
| 12 | |||||||||||||||||||
| 14 | |||||||||||||||||||
Material Specification
| TYPE | Handle Type | Handlebar | Body | Pin | Spring | ||||
 Material |  Surface Treatment | Material | Surface Treatment | Material | Surface Treatment |  Hardness | Material | ||
| E-LZAU54 | L-Shaped/R-Shaped | S35C | Zinc Plating | S35C | Black Zinc Plating | S35C | Zinc Plating | 45~55HRC | SWP-B |
Product Features
• Reset type.
• Indexing plunger and mounting flange integrated product.
• Suitable for installation on walls of equipment, machines, etc.
• Commercially available hex socket screws, etc. can be used as mounting screws.
• The use of long hole type allows for position adjustment.
• Indexing plunger and mounting flange integrated product.
• Suitable for installation on walls of equipment, machines, etc.
• Commercially available hex socket screws, etc. can be used as mounting screws.
• The use of long hole type allows for position adjustment.