Spring Plungers Micro, Set Screw

Spring Plungers Micro, Set Screw

♢The spring plunger is also known as the positioning column, ball screw, spring screw, etc. It is a product involving vertical stroke, in which the front pin is pressed till the pin sinks into the body and then the front pin can be ejected through the built-in spring. It can be used in mold release, workpiece lifting and positioning, etc., which can be widely applied in medium and low-precision mechanical devices, fixtures, molds, automation machines, etc.
♢This series comes with a groove that is laterally fixed by set screws.

Spring Plungers Micro, Set Screw
 

Part Number		S	d	D1	L	ℓ	F	G	C	Light Load		Heavy Load
Type	Dh7									Load (N)		Load (N)
										min.	max.	min.	max.
(Flat Head) E-LMPFLT E-LMPFHT	2	1.5	1	2.5	20.5	2.5	0.5	1	0.1	0.49	0.98	1.96	3.92
		3			30.5							1.67	3.73
	3	3	2	3.5	20.5				0.2	0.49	1.47	2.45	3.92
		6			30.5							2.26	3.73
	4	3	3	4.5	20.5	3.5	0.8		0.2	0.59	1.47	3.43	5.3
		6			25.5					0.49	2.06	2.45	5.3
		9			37.5					0.69	3.92	2.94	6.47
	5	4	4	5.5	22.5				0.3	0.64	1.96	3.73	6.96
		8			29.5					0.78	3.82	3.04	7.06
		12			37.5					0.83	5.79	2.75	7.06

♢O.D. φ2~5 small diameter type helps saving space. The front end is available in flat head type, spherical type and cone head R type, allowing for selection of suitable products according to the requirements for mounting hole.
♢ It is made of all stainless steel without painting and coloring, so it is suitable for equipment with high requirements on the surface.
♢ The spring plunger is a product involving vertical stroke. It can be used in mold release, workpiece lifting and positioning, etc., which can be widely applied in medium and low-precision mechanical devices, fixtures, molds, automation machines, etc.