Bushings for Inspection Jigs, Shouldered, D-Shaped Hole
Brand :
MISUMI
Caution
Product Description
Dimensional Drawing
Material Specification
| [ M ] Material | [ H ] Hardness | [ S ] Surface Treatment | ②Shouldered Type | |
| Type | Material Code | |||
| Equivalent to SKS93 | 50～60HRC | - | (P＋0.03 ＋0.01/F＋0.05 0) E-KJB (PH8/F＋0.03 0) E-KJBH | STK |
| Martensitic stainless steel | 45～50HRC | - | STKC | |
Specification Table
Please select 1 item from Type, Material Code and D Dimension respectively.
[ ! ]1 For Austenitic Stainless Steel, there must be a 2mm or greater wall thickness (D-P/2≥2) between D-shaped hole and outer diameter.
| Part Number | Common to all models | Only ②Shouldered Type | |||||||
| Type | Material Code | D | P 0.01mm increments | F(F＜P/2) 0.1mm increments | L 1mm increments | T Selection | H | ||
| Shouldered Type | |||||||||
| (P＋0.03 ＋0.01/F＋0.05 0) E-KJB (PH8/F＋0.03 0) E-KJBH | STK STKC[ ! ]1 | 8 | 3.00～ 5.00 | 0.3～ 2.4 | 5~25 | 2 | 3 | 5 | D＋4 |
| 10 | 3.00～ 7.00 | 0.3～ 3.0 | |||||||
| 12 | 3.00～ 9.00 | 0.5～ 4.0 | |||||||
| 16 | 4.00~13.00 | 0.5～ 6.0 | |||||||
| 20 | 6.00~17.00 | 1.0～ 8.0 | |||||||
| 25 | 8.00~21.00 | 2.0~10.0 | |||||||
| P | H8 |
| 3.00~6.00 | +0.018 0 |
| 6.01~10.00 | +0.022 0 |
| 10.01~18.00 | +0.027 0 |
| 18.01~21.00 | +0.033 0 |