Metal Collars Length Configurable
Brand :
MISUMI
Caution
Product Description
Product Overview
It is generally used as a component that is cushioned at the workpiece connector and plays a role of precise adjustment of the clearance on the cushioned part.
Dimensional Drawing
Specifications Overview
| Part Number |  Material |  Surface Treatment | V | D | L (0.1mm increments) | |
| Normal | Precision | |||||
| E-NCLC | E-ACSC | General structural steel or carbon steel | - | 2~30 | 4~60 | 10.0~100.0 |
| E-NCLB | E-ABSC | Ferroferric Oxide Protective Film | ||||
| E-NCLM | E-AMSC | Electroless Nickel Plating | ||||
| E-NCLA | E-AASC | Aluminum Alloy | Clear Anodized | |||
| E-NCLSS | E-SASC | Austenitic stainless steel | - | |||
If there are requirements for product hardness, refer to
Metal Washer Hardened Products.Specification Table
| Part Number | D Selection | L 0.1mm increments | |||||||||||||||||||
| Type | V | ||||||||||||||||||||
| -Standard Grade- E-NCLC E-NCLB E-NCLM E-NCLA E-NCLSS -Precision Grade- E-ACSC E-ABSC E-AMSC E-AASC E-SASC | 2 | 4 | 5 | 6 | 8 | 10 | 10.0~16.0 | ||||||||||||||
| 3 | 5 | 6 | 8 | 10 | 12 | 10.0~25.0 | |||||||||||||||
| 25.1~50.0 | |||||||||||||||||||||
| 4 | 5 | 6 | (6) | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 10.0~25.0 | ||||||||||
| (6)->Applicable to V4 | 25.1~50.0 | ||||||||||||||||||||
| 20 | 25 | 10.0~25.0 | |||||||||||||||||||
| 25.1~50.0 | |||||||||||||||||||||
| 8 | 10 | 12 | (10) | (12) | (13) | (14) | 15 | 16 | 10.0~25.0 | ||||||||||||
| 25.1~50.0 | |||||||||||||||||||||
| 50.1~75.0 | |||||||||||||||||||||
| (10)->Applicable to V8(12 13 14)->Applicable to V8, 10 | 75.1~100.0 | ||||||||||||||||||||
| 20 | 25 | 10.0~25.0 | |||||||||||||||||||
| 25.1~50.0 | |||||||||||||||||||||
| 50.1~75.0 | |||||||||||||||||||||
| 75.1~100.0 | |||||||||||||||||||||
| 30 | 35 | 10.0~25.0 | |||||||||||||||||||
| 25.1~50.0 | |||||||||||||||||||||
| 50.1~75.0 | |||||||||||||||||||||
| 75.1~100.0 | |||||||||||||||||||||
| 10 12 | 40 | 50 | 60 | 10.0~25.0 | |||||||||||||||||
| 25.1~50.0 | |||||||||||||||||||||
| 50.1~75.0 | |||||||||||||||||||||
| 75.1~100.0 | |||||||||||||||||||||
| 15 | 16 | 20 | 10.0~25.0 | ||||||||||||||||||
| (20) | 25 | 25.1~50.0 | |||||||||||||||||||
| 50.1~75.0 | |||||||||||||||||||||
| (20)->Applicable to V15, 16 | 75.1~100.0 | ||||||||||||||||||||
| 30 | 35 | 10.0~25.0 | |||||||||||||||||||
| 25.1~50.0 | |||||||||||||||||||||
| 50.1~75.0 | |||||||||||||||||||||
| 75.1~100.0 | |||||||||||||||||||||
| 25 30 | 40 | 50 | 60 | 10.0~25.0 | |||||||||||||||||
| 25.1~50.0 | |||||||||||||||||||||
| 50.1~75.0 | |||||||||||||||||||||
| 75.1~100.0 | |||||||||||||||||||||
Product Features
Feature 1: There is a wide range of options for inner and outer diameters and thickness, and for the L dimension configurable type, the thickness can be specified in 0.1mm increments.
Feature 2: High-precision products made by cutting and machining can realize high-precision spatial adjustment.
Feature 3: Depending on the design requirements, there are three types of optional materials: general structural steel or carbon steel (equivalent), aluminum alloy and austenitic stainless steel.
Feature 4: For products made of general structural steel or carbon steel, there are two types of optional surface treatment: ferroferric oxide protective film and electroless nickel plating.
For products made of aluminum alloy, the surface treatment is clear anodizing.
Feature 2: High-precision products made by cutting and machining can realize high-precision spatial adjustment.
Feature 3: Depending on the design requirements, there are three types of optional materials: general structural steel or carbon steel (equivalent), aluminum alloy and austenitic stainless steel.
Feature 4: For products made of general structural steel or carbon steel, there are two types of optional surface treatment: ferroferric oxide protective film and electroless nickel plating.
For products made of aluminum alloy, the surface treatment is clear anodizing.
Usage Method
| Diagram | Instructions |
 | It can be used to ensure the relative position between two timing pulleys. |
 | It can be used for limiting the position of the linear parts or fixed parts on the shaft. |
 | Can be matched with screws to control the relative clearance between the sheet metal and the support. |
Precautions
①When the relative humidity of the operating environment is high and certain anti-rust ability is required, please choose products with electroless nickel plating surface treatment or stainless steel SUS3 series materials.
②When the operating environment requires certain abrasion resistance and hardness for metal collars, give priority to metal washer hardened products.
②When the operating environment requires certain abrasion resistance and hardness for metal collars, give priority to metal washer hardened products.
Example of Use
■Mechanism name
Different fixtures used according to the frequency of process switching.
■Mechanism function
Because of the use of fast-fixing parts and replaceable positioning parts, it can be used as a support fixture for a variety of workpieces.
■Role of metal collar
A metal collar is placed on the fixed surface of the toggle clamp to limit the height of the toggle clamp. For workpieces of different thicknesses, a variety of metal collars of different lengths can be replaced.
For detailed information, click
inCADLibrary Application Library.
Different fixtures used according to the frequency of process switching.
■Mechanism function
Because of the use of fast-fixing parts and replaceable positioning parts, it can be used as a support fixture for a variety of workpieces.
■Role of metal collar
A metal collar is placed on the fixed surface of the toggle clamp to limit the height of the toggle clamp. For workpieces of different thicknesses, a variety of metal collars of different lengths can be replaced.
For detailed information, click
inCADLibrary Application Library.Application Industries
| Smart Phones | Electronic & Electrical | Lithium battery | ||
 |  |  | ||
| Automotive | Robotics | Medical | ||
 |  |  |
Related Products
| Ultra short head hex socket bolt | Adjustment Screw Components Hex Head Stud | Axle Pin Bolt | ||
 |  |  | ||
| Representative model: CBSA6-12 | Representative model: ANH4-20 | Representative model: DBTS6-3-10 | ||
| Advantages: space saving, sufficient stock | Advantages: Front end hardened, optional length | Advantages: Accurate positioning, high shaft precision |
Related Documents