Pivot Pins Shouldered, Retaining Ring

Brand :

MISUMI

Caution

Product Description

Product Overview

The hinge pin can be used as the pivot point of various rotary connection mechanisms. The pivot point is similar to the axis of a hinge, and the connected parts can make rotary movements.

Dimensional Drawing

Hinge pins with shouldered retaining ring Material table HINGE PINS

*Dg7 tolerance is limited to the L dimension range. Others are negative tolerances.

This type may have centering holes depending on dimensions.

E-HCCG and E-PHCCG have identification grooves on the side in order to distinguish them from the hardened type.

The dimension of the relief groove on the shoulder and neck is a reference value.

Specifications Overview

Type	Equivalent Material	Hardness	Surface Treatment	Accessories
L Dimension Configurable
E-HCCG	General Structural Steel or Carbon Steel L Dimension Fixed General Structural Steel or Carbon Steel	-	Ferroferric Oxide Protective Film	1 Retaining Rings
E-HCCGH		HRC40～
E-PHCCG		-	Electroless Nickel Plating
E-PHCCGH		HRC40～
E-GHCCG		Plating hardness 750HV～	Hard Chrome Plated
E-SHCCG	Austenitic stainless steel	-	-
E-SHCCGH	Martensitic stainless steel	HRC45～
E-GSHCCGH		HRC45～ Plating hardness 750HV～	Hard Chrome Plated

If there are requirements for rust prevention, give priority to products made of austenitic stainless steel, hard-chrome plated products or those with surface treatment of electroless nickel plating.

Specification Table

Part Number		L	M		N	u	(n)	d		T	H
Type	D	L Dimension Configurable (0.1mm increments)		Tolerance	N	u	(n)		Tolerance	T	H
L Dimension Configurable E-HCCG E-HCCGH E-PHCCG E-PHCCGH E-GHCCG E-SHCCG E-SHCCGH E-GSHCCGH	2	5.0~30.0	0.5	+0.05 0	2	2.9	≤1.5	1.5	+0.06 0	1.5	4.5
	3	5.0~50.0	0.5	+0.05 0		2.9		2			5.5
	4	5.0~50.0	0.7	+0.1 0		3.9		3			6.5
	5	10.0~60.0				4.9		4	+0.075 0		8
	6	10.0~100.0				5.8		5	+0.075 0		9
	8	10.0~100.0	0.9		3	7.8		7	+0.09 0	2	12
	10	15.0~100.0	1.15	+0.14 0		9.8		9.6	0 -0.09	2	14
	12	15.0~150.0				11.8		11.5	0 -0.11	3	17
	13	20.0~150.0				12.8		12.4			18
	14					13.8		13.4			19
	15					14.8		14.3			20
	16	20.0~150.0				15.8		15.2			21
	17					16.8		16.2			22
	18		1.35			17.8		17			23
	20					19.8		19	0 -0.21	4	26
	22					21.8		21			27
	25					24.8		23.9			30

For JIS engineering specifications of the accessory retaining ring, refer to

Here

E-SHCCGH and E-GSHCCGH may be discolored due to hardening.

If there are requirements for rust prevention, give priority to products made of austenitic stainless steel, hard-chrome plated products or those with surface treatment of electroless nickel plating.

Precision Standard

D Tolerance (g7)
2・3	-0.002 -0.012
4~6	-0.004 -0.016
8・10	-0.005 -0.020
12~18	-0.006 -0.024
20~25	-0.007 -0.028

Product Features

Feature 1: It has a tolerance of g7 and is used in conjunction with bearings.
Feature 2: Available in various shapes. The shapes include straight cotter pin type, straight retaining ring type, shouldered cotter pin type, shouldered retaining ring type, shouldered lock nut type, set screw type, shouldered set screw type, and both ends tapped type.
Feature 3: Products made of stainless steel (austenitic stainless steel) with excellent anti-rust performance and products with the surface treatment of hard-chrome plating or electroless nickel plating are available for selection to solve the problem of rusting.
Feature 4: L Dimension Configurable type, freely selectable in 0.1mm increments to accommodate different use environments.
Feature 5: The L Dimension Fixed type is available at a relatively low price.

Precautions

①Dg7 tolerance is limited to the L dimension range. Others are general tolerances.
②Anti-rust specification selection and maintenance.
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel, products with surface treatment of hard chrome plating or those with surface treatment of electroless nickel plating.
Products without surface treatment need to be applied antirust oil regularly for maintenance.
③This product comes with 1 retaining ring, so take care to avoid missing upon receipt.
④Alteration is only applicable to the L dimension configurable type.

Example of Use

Pivot Pins Shouldered, Retaining Ring, Material Table, Specification Table HINGE PINS

Application Industries

Electronic & Electrical	Automotive	Lithium battery

Robotics	Smart Phones	Semiconductor

Adjustment Screw Components Hex Socket on Head	Single Bearing Type with Retaining Ring Embedded	Packed Gasket Ring Fixed/Gasket Ring

Representative model: ANB8-40	Representative model: BGRR6000ZZ	Representative model: PCIMR6-12-0.1

For anti-rust performance of metal materials and surface treatment, refer to	[PDF] Click here
For JIS engineering specifications of the accessory retaining ring, refer to	[PDF] Click here