Bearings with Housings, Double Bearing, Guided Flange Type, with Retainer Ring

It supports and fixes the bearing of the load carrying shaft. The bearing can be accurately and conveniently assembled onto the mechanism using the holder.

  

Type - Selectable			Type - Specified Type			Material			Surface Treatment
Round	Square Type	Compact Type	Round	Square Type	Compact Type	Bearing	Holder	Retaining Ring	Holder
E-LBGRZB	E-LBGSZB	E-LBGCZB	E-LBGFRZB	-	E-LBGFCZB	Steel	S45C	Spring Steel	Black Oxide Film
E-LBGRZ	E-LBGSZ	E-LBGCZ	E-LBGFRZ	E-LBGFSZ	E-LBGFCZ				Electroless Nickel Plating
E-LBARZ	E-LBASZ	E-LBACZ	E-LBAFRZ	-	-		Aluminum		Clear Anodized
E-LSBARZ	E-LSBASZ	E-LSBACZ	E-LSBAFRZ	-	E-LSBAFCZ	Stainless Steel		SUS304
E-LSBGRZ	E-LSBGSZ	E-LSBGCZ	-	-	-		SUS304		-

  

Specifications & Dimensions Table

Part Number				Selection		Can be specified down to 1 mm increments		d	DH7		B	ℓ	H	W	T	dh	D1 g7		P.C.D.	K	A	F	d1	d2	H1
Type - Selectable	Type - Specified Type	Bearing Part Number	Bearing Cover Type	L	S	L	S			Tolerance								Tolerance
Round E-LBGRZB E-LBGRZ E-LBARZ E-LSBARZ E-LSBGRZ Square E-LBGSZB E-LBGSZ E-LBASZ E-LSBASZ E-LSBGSZ Compact E-LBGCZB E-LBGCZ E-LBACZ E-LSBACZ E-LSBGCZ	Round E-LBGFRZB E-LBGFRZ E-LBAFRZ E-LSBAFRZ Square E-LBGFSZ Compact E-LBGFCZB E-LBGFCZ E-LSBAFCZ	623	ZZ Double Shield Type VV Non-contact Rubber Seal Ring DD Contact Rubber Seal Ring	20 30	5	20 to 40	5 to 28	3	10	+0.015 0	4	2.65	33	16	7	7	14	-0.006 -0.024	24	27	24	-	6.5	3.5	3.1
		624		20 30	5	20 to 40	5 to 28	4	13	+0.018 0	5	2.65	35	18		9	17		26	28	26
		605		25 35	5	20 to 40	5 to 27	5	14		5	2.65	38	20	8	10	18		28	30	28		8	4.5	4.1
		625		35 40	10	30 to 40	10 to 22		16		5	2.65	40	22		12	20	-0.007 -0.028	30	31	30
		606		25 40	5	20 to 40	5 to 27	6	17		6	2.65	41	23		13	21		31	32	31
		626		35 45	10	30 to 50	10 to 32		19	+0.021 0	6	2.65	44	25		15	24		34	34	34
		698		25 35	5	25 to 50	5 to 37	8	19		6	2.65	44	25		15	24		34	34	34
		608		25 35	5	20 to 50	5 to 37		22		7	2.65	47	29		18	27		37	36	37
		628		35 45	10	30 to 50	10 to 32		24		8	2.85	50	32		20	30		40	37	40
		6800		20 30	5	20 to 40	5 to 27	10	19		5	2.65	44	25		15	24		34	34	34
		6900		25 40	5	25 to 60	5 to 47		22		6	2.65	47	29		19	27		37	36	37
		6000		35 50	10	30 to 60	10 to 42		26		8	2.85	52	34		22	32	-0.009 -0.034	42	39	42
		6200		45 55	15	40 to 60	15 to 37		30		9	2.85	56	38		24	36		46	42	46
		6801		25 35	5	25 to 50	5 to 37	12	21		5	2.85	47	29		17	26	-0.007 -0.028	37	36	37
		6901		35 50	10	30 to 60	10 to 42		24		6	2.85	50	31		21	30		40	38	40
		6001		35 50	10	30 to 60	10 to 42		28		8	2.85	54	36		24	34	-0.009 -0.034	44	40	44
		6201		45 55	15	40 to 70	15 to 47		32	+0.025 0	10	2.85	58	40		26	38		48	43	48
		6802		25 35	10	25 to 60	10 to 42	15	24	+0.021 0	5	2.85	50	32		20	30	-0.007 -0.028	40	37	40
		6902		35 60	10	30 to 70	10 to 50		28		7	2.85	59	37	10	25	35	-0.009 -0.034	47	45	47		9.5	5.5	5.1
		6002		45 65	15	40 to 70	15 to 45		32	+0.025 0	9	2.85	62	40		28	38		50	46	50
		6202		50 65	15	40 to 70	15 to 45		35		11	3.75	66	44		29	42		54	49	54
		6903		45 55	15	40 to 70	15 to 45	17	30	+0.021 0	7	2.85	60	38		27	36		48	46	48
		6003		50 65	15	40 to 70	15 to 45		35	+0.025 0	10	3.75	66	44		31	42		54	50	54
		6203		60 70	20	50 to 70	20 to 40		40		12	3.95	72	50		34	48		60	54	60
		6804		35 50	10	35 to 70	10 to 50	20	32		7	3.75	62	40		28	38		50	46	44	24
		6904		50 65	15	45 to 70	15 to 44		37		9	3.75	72	47	11	34	45		59	54	54	24	11	6.6	6.1
		6004		60 70	20	55 to 80	20 to 49		42		12	3.95	77	54		36	50		64	59	56	32
		6204		65 70	20	55 to 80	20 to 49		47		14	3.95	81	58		40	54	-0.010 -0.040	68	62	59	34
		6805		35 50	15	35 to 70	15 to 44	25	37		7	3.75	72	47		34	45	-0.009 -0.034	59	54	54	24
		6905		35 50	15	35 to 70	15 to 44		42		9	3.95	77	54		36	50		64	59	55	32
		6005		60 80	20	55 to 80	20 to 47		47		12	3.95	88	58	13	41	54	-0.010 -0.040	72	67	63	36	14	9	8.1
		6205		65 80	20	55 to 80	20 to 47		52	+0.030 0	15	4.2	94	64		45	60		78	72	68	39
		6806		35 50	15	35 to 70	15 to 42	30	42	+0.025 0	7	3.95	77	54	11	36	50	-0.009 -0.034	64	59	56	32	11	6.6	6.1
		6906		35 50	15	35 to 70	15 to 42		47		9	3.95	88	58	13	41	54	-0.010 -0.040	72	67	62	36	14	9	8.1
		6006		60 80	20	55 to 80	20 to 47		55	+0.030 0	13	4.2	96	66		48	62		80	73	70	40
		6206		70 80	20	55 to 120	20 to 87		62		16	4.2	104	74		55	70		88	79	77	44
		6007		70 80	20	55 to 120	20 to 87	35	62		14	4.2	104	74		55	70		88	79	75	44
		6207		70 90	20	55 to 120	20 to 87		72		17	6	126	88	20	64	84	-0.012 -0.047	105	95	92	51	17.5	11	11
		6008		80 90	25	65 to 120	25 to 82	40	68		15	5.2	114	82	13	60	78	-0.010 -0.040	96	86	80	54	14	9	8.1
		6208		70 90	20	65 to 120	25 to 82		80		18	6	134	96	20	74	92	-0.012 -0.047	113	102	98	56	17.5	11	11
		6010	ZZ Double Shield Type	80	20	65 to 120	25 to 82	50	80		16	6	134	96		74	92		113	-	98	56
		6210		100	20	70 to 120	25 to 82		90	+0.035 0	20	7	147	110		83	106		126	-	104	72

VV (non-contact rubber seal) is not applicable for bearings with model numbers 623, 624, 605, and 606.
When the specified type does not specify the S size, the smallest S size will be used.

Product Features:
Feature 1: The round bearing housing assembly is suitable for locations requiring high-precision rotation.
Feature 2: The retaining ring in the bearing housing assembly with retaining ring prevents the bearing from falling out, making installation and use easier.
Feature 3: Compared with the single bearing type, the double bearing type bearing housing set is more suitable for heavy load operating environments and keeps transmission products such as rotating shafts fixed.
Feature 4: Double bearing type bearing block assemblies are very convenient for cantilever support.
Feature 5: The bearing housing assembly has high perpendicularity and coaxiality, making precise positioning easier during installation.

Mounting method of bearing housing set	Detailed explanation of installation
	Standard bearing housing sets are machined with counterbored holes or threaded holes so that they can be mounted from the front or back.
	Accurate positioning can be achieved by aligning the machined holes with H7 tolerance on the mounting surface when the guided bearing housing set is installed.