Bearings with Housings, Double Bearing, T-Type without Retainer Ring

Brand :

MISUMI

Caution

Product Description

Product Overview

Generally, it is located at both ends of the rotating shaft, and its main function is to support and fix the rotating shaft, so that the rotating shaft and its connectors have a certain positional relationship.
The product comes with bearings, assembled into components for shipment, no need to install by yourself.

Product Overview

Dimensional Drawing

Bearing Precision:	GB/T 307.1 Grade 0
	Equivalent to JIS B 1514 Class 0

Bearings without retaining rings may fall off, but can be used normally after reinstallation.

Material Table

Type				Material		Surface Treatment
T Selection·h Selection Type	T Selection·h Specified Type	T Designated Type · h Designated Type	T Selection·h Specified Chamfer Type C	Bearing	Holder	Holder
E-LBGHWB	E-LBGHWFB	E-LBGHWTB	E-LBGHWFB-C	Steel	S45C	Black Oxide Film
E-LBGHW	E-LBGHWF	E-LBGHWT	E-LBGHWF-C		S45C	Electroless Nickel Plating
E-LBGHWA	E-LBGHWFA	E-LBGHWTA	E-LBGHWFA-C		Aluminum	Clear Anodized
E-LBGHWSA	E-LBGHWFSA	-	E-LBGHWFSA-C	Stainless Steel	Aluminum	Clear Anodized
E-LBGHWS	E-LBGHWFS	E-LBGHWTS	E-LBGHWFS-C	Stainless Steel	SUS304	-

Alteration

Alterations	Add Chamfer C Processing		Add Chamfer C2 Processing	Non-bearing Type
Code	KKC		KCC	NA
Spec.	Add chamfering C (45°) to both sides of the upper end.		Add top face chamfering C2 processing.	Bearings are not assembled in the fixed housing and are shipped as accessories.
	Specifying Method KKC
	d	KKC
	3 to 8	5
	10 to 20	10
	25 to 40	12

Specification Table

Specifications & Dimensions Table

Part Number			Width T			Height h		d	D_H7		dh	B	H	L	L₁	L₂	G	S	C	d₁
Type	Bearing Part Number	Bearing Cover Type	Selection Type	Can be specified down to 1 mm increments		Selection Type	Custom size Unit: 1 mm			Tolerance
				Range (1)	Range (2)
T Selection·h Selection Type E-LBGHWB E-LBGHW E-LBGHWA E-LBGHWSA E-LBGHWS T Selection·h Designated Type E-LBGHWFB E-LBGHWF E-LBGHWFA E-LBGHWFSA E-LBGHWFS T-Specified / h-Specified Type E-LBGHWTB E-LBGHWT E-LBGHWTA E-LBGHWTS T Selection·h Specified Chamfer C Type E-LBGHWFB-C E-LBGHWF-C E-LBGHWFA-C E-LBGHWFSA-C E-LBGHWFS-C	623	ZZ Double Shield Type VV Non-contact Rubber Seal Ring DD Contact Type Rubber Seal Ring	20 30 35	-	-	10 15 20 25	-	3	10	+0.015 0	7	4	h+9	36	26	16	5	5	5	4.5

	624							4	13	+0.018 0	9	5	h+11	38	28	18
	605							5	14		10			40	30	20
	625		25 30 35			20 25 30			16		12		h+12	46	34	22	6	10
	606		25 35 40	22 to 34	36 to 50		15 to 30	6	17		13	6	h+13	47	35	23				5.5
	626								19	+0.021 0	15		h+14	49	37	25
	608							8	22		18	7	h+15	53	41	29
	628								24		20	8	h+16	56	44	32
	6900		25 40 45	22 to 39	41 to 50	20 30 40	15 to 40	10	22		19	6	h+15	53	41	29			10
	6000						20 to 40		26		22	8	h+17	58	46	34
	6200		30 40 45						30		24	9	h+19	62	50	38
	6901		25 30 40					12	24		21	6	h+16	56	44	32
	6001								28		24	8	h+18	60	48	36
	6201		30 40 45		41 to 60				32	+0.025 0	26	10	h+20	64	52	40

	6902		25 40 50	25-49	51 to 60	25 30 40 50	20 to 50	15	28	+0.021 0	25	7	h+18	60	48	36		15

	6002		30 40 50				25 to 50		32	+0.025 0	28	9	h+20	68	54	40	7			6.5
	6202		35 40 50						35		29	11	h+22	72	58	44
	6903		25 40 50					17	30	+0.021 0	27	7	h+19	64	52	38

	6003		30 40 50						35	+0.025 0	31	10	h+22	70	56	43
	6203		35 40 50		51 to 70				40		34	12	h+24	76	62	49
	6904					30 40 50 60	30 to 60	20	37		34	9	h+23	73	59	45
	6004		40 50 55	30 to 49	51 to 80				42		36	12	h+25	82	66	50	8			9
	6204		45 50 55						47		40	14	h+28	88	72	56
	6005		40 50 60	34 to 59	61–80	35 40 50 80	35 to 80	25	47		41	12		96	76	56	10	15	12
	6205		45 50 60	37 to 59	61 to 90				52	+0.030 0	45	15	h+31	102	82	62	10	20	12	11
	6006		40 45 50 60					30	55		48	13	h+32	104	84	64
	6206		50 60 65		61 to 100				62		55	16	h+36	112	92	72
	6007			37 to 65	66 to 100	45 50 90	40 to 90	35	62		55	14	h+36	112	92	72	10	20	12	11
	6207		60 65 70	45 to 74	75 to 100				72		64	17	h+44	148	118	88	15	25	15	13
	6008		50 60 70	40 to 69	71 to 100	50 60 100	45 to 100	40	68		60	15	h+41	122	102	82	10	20	12	11
	6208		60 65 80	50 to 79	81 to 100				80		74	18	h+50	160	130	100	15	25	15	13

VV (non-contact rubber seal) is not applicable for bearings with model numbers 623, 624, 605, and 606.

Product Features

Feature 1: Can be installed and used even if the surrounding space is small.
Feature 2: Each different bearing model can have a different installation height.
Feature 3: Chamfering can be added as needed.
Feature 4: The fixed seat and bearing can be shipped separately according to your needs.

Precautions

Precautions	Illustration and Reference
Anti-rust performance and maintenance of metal materials and surface treatment.	For detailed rust prevention performance and maintenance, please refer to the technical documentation.
Bearing accuracy for bearing housing assembly: GB/T 307.1 Class 0 (equivalent to JIS B 1514 Class 0) When selecting mating parts, please choose products with negative tolerance.	For detailed bearing specifications, please refer to the technical documentation.
When selecting, please note that axial clearance exists between the bearing and the retaining ring. Axial direction: The direction along the rotational central axis of cylinder, which is the same direction as the central axis. (Blue direction shown on the right) Radial direction: perpendicular to the axial direction, which is the radius or diameter direction of the end face circle of the cylinder. (Red direction shown on the right)
The retaining ring in the bearing housing set with retaining ring cannot be fastened axially, and it only plays a role in preventing the bearing from falling off. If you need to tighten the bearing axially, it is recommended to use a retaining ring, nut, etc. When choosing a fixing ring, nut, etc. for axial tightening, please take care to avoid the retaining ring. Please refer to the product specifications for retaining ring dimensions.

Example of Use

Equipment Name: Belt Conveyor Mechanism
Feature 1: Bearing housing set T-type fixed to the bottom plate, as a pulley, toothed timing belt connecting mechanism example.
Feature 2: This product can complete the construction of the mechanism while occupying a very small space.