Timing Belt Conveyor, Dual Track, Head Driver, Pulley Dia. 50mm, Built-in Motor

Brand :

MISUMI

Caution

This single-phase motor is specified for 220V ±10%,50Hz/60Hz. Please ensure it is used within the permissible voltage range.

Product Description

Economy series Belt Conveyor

Product Overview

Economy series conveyor, with a rational structural design and localized production. A variety of models are available to meet customers' design needs for different usage scenarios, providing better options.
E-CVGTD: Double-row synchronous timing belt, built-in motor, reduced footprint, suitable for conveying jig tray products.

Dimensional Drawing

E-CVGTD

Motor Specification: 25W

When L > 2000, 1 set (2 pieces) of belt support rollers is included.
Support Component Notes:
When L ≤ 500, there is 1 set of support components
When L is 505 to 1000, there are 2 sets of support components
When L is 1005 to 1500, there are 3 sets of support components
When L>1500, there are 4 sets of support components

When L ≤ 500, there is no countersunk hole at position F, and 4 nuts are pre-installed on one side inside the aluminum profile slot;
When L>500, a countersunk hole for nut insertion is reserved by default at position F, no additional machining is required.

When selecting a speed control motor, the speed controller is an accessory, not installed on the main unit, and does not come with a mounting bracket.
If you need a bracket for the speed controller, please use additional processing (SCB)

■ Details of A Dimension

Motor Power	Motor		Reduction Ratio	A
	Specifications	Manufacturer
25W	Induction Motor / Variable Speed Motor	GPG	3 to 18	L118
			25 to 180	L130
	Induction Motor	JSCC	3 to 18	L119
			25 to 180	L130
	Variable Speed Motor		3 to 18	L129
			25 to 180	L140

Enlarged Profile View (Symmetrical Left and Right)

Standard Nut Fitting Table for Profile Slot: L Value (Center Distance Unit: mm)

L300-999	L1000 to 1499	L1500 or more	Position	Specifications	Configuration Type
4PCS	6PCS	8PCS	X Section (Left/Right)	M3 (Hexagon)	Accessories
4PCS	6PCS	8PCS	Y Section (Left/Right)	M6 (Square)	Accessories

Material Table

Part Name	Material	Surface Treatment
Frame	Aluminum	Electro Plating
Motor Cover Plate	Aluminum	Baked Paint
Pulley Housing	Aluminum	Baked Paint

Specifications Overview

■ Flat Belt Width - Pulley Center Distance Correspondence Table

Part number	Belt Width B	Pulley Center Distance L
Part number	Belt Width B	L300 to 500	L505 to 600	L605 to 800	L805 to 900	L905 to 1000	L1005 to 3000
E-CVGTD	150	●	●	●	●	●	●
	160 to 200	●	●	●	●	●	●
	210 to 250	●	●	●	●	●	●
	260 to 300	●	●	●	●	●	●

Alterations

Part Number	-	B	-	L	-	Motor Selection					-	Belt Specifications	-	Motor Manufacturer Selection	-	Alterations

						Output Power	-	Specifications	-	Gear Head Reduction Ratio
E-CVGTD	-	200	-	1000	-	25	-	SCM	-	25	-	H	-	G	-	SCB

Alterations	Code	Spec
Mounting Bracket for Speed Controller	SCB	Includes mounting bracket for speed controller. Ordering Code SCB

Specification Table

Please order after selecting part number and parameters according to the selection steps

	Part Number	-	B	-	L	-	Motor Selection					-	Belt Specifications	-	Motor Manufacturer Selection

							Output Power	-	Specifications	-	Gear Head Reduction Ratio
Without belt Without motor or gear head	E-CVGTD E-CVGTD E-CVGTD	- - -	200 200 200	- - -	1000 1000 1000	- - -	25 25 25	- - -	SCM INV NM	- - -	25 30 NH	- - -	H J H	- - -	G G R

■Specification Table

Part Number	Shape	Model Features
E-CVGTD	Medium Load Side Guide Type	Tooth surface fabric for noise reduction, supports precision positioning and conveying

Part Number	B can be specified down to 10 mm increments	L Can be specified down to 5mm increments	Motor Selection			Belt Specifications (Material is generally PU)	Motor
			Output Power (W)	Specifications	Gear Head Reduction Ratio
E-CVGTD	150 to 300	300 to 3000 (2440)	25	SCM (Single-phase 220V Variable Speed Motor)	5 7.5 10 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180	H(General-purpose · White toothed surface tape) S(For sliding · Green double-sided tape) D(Antistatic · Black double-sided tape) J(No belt)	G(GPG Motor) J(JSCC Motor)
				INV (Three-Phase 220V Induction Motor)
				NM(No Motor)	NH(No Gear Head)		R(No Motor · Gear Head)

When selecting without a motor and gear head, the motor mounting hole pitch will vary depending on the motor output power.

If you need to use a stepper motor or servo motor for automatic control, you can choose the model without a motor and gear head.

When selecting without motor and gear head, the main unit will be delivered as parts. Please assemble by following the assembly instructions included in the same package.

For belts other than those listed above, please refer to the specification overview. Click

here.

When the selected size

L exceeds ( ) value, confirmation of shipping days may be required prior to placing an order or requesting a quotation due to transportation constraints.

■ Conveying Capacity
MISUMI Belt Conveyor Load Capacity

The chart shows the transport capacity under horizontal conditions.

Carrying capacity may vary depending on usage conditions.

When selecting a speed control motor, the transport capacity does not increase as the speed decreases.

■ Gear Head Reduction Ratio - Speed Correspondence Table

May decrease depending on load conditions

*Reference value

Gear Head Reduction Ratio	Timing Belt Speed (m/min)
Gear Head Reduction Ratio	SCM Speed Control Type	INV Inverter Type
5	29.0 to 48.3	60.1
7.5	19.3 to 32.2	40.1
10	14.5 to 24.2	30.1
12.5	11.6 to 19.3	24.1
15	9.7 to 16.1	20.0
18	8.1 to 13.4	16.7
25	5.8 to 9.7	12.0
30	4.8 to 8.1	10.0
36	4.0 to 6.7	8.4
50	2.9 to 4.8	6.0
60	2.4 to 4.0	5.0
75	1.9 to 3.2	4.0
90	1.6 to 2.7	3.3
100	1.4 to 2.4	3.0
120	1.2 to 2.0	2.5
150	1.0 to 1.6	2.0
180	0.8 to 1.3	1.7

Product Features

Feature 1: Simplifies belt replacement steps and improves maintainability.
Feature 2: The conveyor body is made of aluminum profiles, achieving an overall lightweight design.
Feature 3: Double-row narrow-width toothed belt, suitable for conveying jig tray products, supports precise positioning and conveying.
Feature 4: The timing belt center distance can be specified in 10 mm increments, and the pulley spacing can be specified in 5 mm increments.

Precautions

(1) When installing onto equipment, ensure the flatness of the aluminum profile.
(2) Do not disassemble or modify the conveyor by yourself to avoid performance issues.
(3) Due to different conveyor usage environments, MISUMI conveyors do not come with a power supply, cables, or switches.
(4) In applications, due to issues with machine structure strength and body deformation, please do not exceed the allowable load and length/width when selecting models.
(5) Even when the motor is operating normally, its surface temperature may sometimes exceed 70°C . Be sure to take precautions to avoid burns.
(6) If operated in the opposite direction to the standard running direction, abnormal conditions such as belt misalignment, belt damage, noise, or jamming may occur. Please avoid use. (The standard shipping direction is as shown below)
MISUMI Belt Conveyor Standard Transport Direction

MISUMI Belt Conveyor Standard Transport Direction

Application Industries

Equipment Production	Semiconductor	Lithium battery

Food	Electronic & Electrical Appliances	Robotics

Economy Conveyor Synchronous Timing Belt Double-Row Head Drive Pulley Diameter 50 mm	Economy Conveyor Synchronous Timing Belt Double Row Head Drive Pulley Diameter 70 mm Built-in Motor	Economy Conveyor Flat Belt with Built-in Motor Drive Pulley Diameter 70 mm

Representative Model: E-CVGTB	Representative Model: E-CVGTE	Representative Model: E-CVSMA

(1) Motor wiring method
(2) Flat belt specification list
(3) Deviation adjustment method
(4) Conveyor body weight