[Simplified Adjustments] Z-Axis, Heavy Load Horizontal Type

This simple adjustment unit combines a trapezoidal screw with a linear guide, making it ideal for manual, simple position adjustments, positioning, and conveying applications.
The manual adjustment unit with a position indicator provides simple vertical positioning, allowing stable up-and-down movement even for workpieces weighing up to 30 kg. With the position indicator, repeatable accuracy in vertical position adjustments can also be ensured.
The main body is made of aluminum alloy, achieving a lightweight design.
Due to localized production in China and improved manufacturing processes, the price has been significantly reduced. This stage offers a balance between performance and price.

E-ZPHQG170-B	E-ZPHQG220-B
E-ZPHQG320-B	E-ZPHQG370-B
E-ZPHQG420-B	E-ZPHQG470-B
E-ZPHSQG170-B	E-ZPHSQG220-B
E-ZPHSQG320-B	E-ZPHSQG370-B
E-ZPHSQG420-B	E-ZPHSQG470-B
E-ZPHQLG170-B	E-ZPHQLG220-B
E-ZPHQLG320-B	E-ZPHQLG370-B
E-ZPHQLG420-B	E-ZPHQLG470-B
E-ZPHSQLG170-B	E-ZPHSQLG220-B
E-ZPHSQLG320-B	E-ZPHSQLG370-B
E-ZPHSQLG420-B	E-ZPHSQLG470-B

 

Type	Type		Main Material		Surface Treatment
			Body	Lead Screw Nut
E-ZPHQG	Handwheel	Non-lifting worktable	Aluminum Alloy	Brass	Clear Anodized
E-ZPHSQG	Handwheel with position indicator
E-ZPHQLG	Handwheel	With lifting worktable
E-ZPHSQLG	Handwheel with position indicator

Please follow the selection steps ~ to choose the type and parameters before placing an order.

		Part Number (Type·No.)	—	Handwheel type
		E-ZPHQG170-B

 

Part Number			Handwheel type	Travel	Load Capacity (N)	Trapezoidal Screw		Net Weight (kg)
Type	Table size	Frame Height				Lead Screw Shaft Diameter	Lead
E-ZPHQG	100X150	170	B (Foldable Plastic Handwheel)	62	294	18	4	6.1
		220		112				6.8
		320		212				8.1
		370		262				8.7
		420		312				10.2
		470		362				11
E-ZPHSQG	100X150	170		62	294	18	4	6.4
		220		112				7.1
		320		212				8.4
		370		262				9
		420		312				10.5
		470		362				11.3
E-ZPHQLG	100X150	170		62	270	18	4	7.2
		220		112				7.9
		320		212				9.2
		370		262				9.8
		420		312				11.3
		470		362				12.1
E-ZPHSQLG	100X150	170		62	270	18	4	7.5
		220		112				8.2
		320		212				9.5
		370		262				10.1
		420		312				11.6
		470		362				12.4

■ Load capacity
  Refers to the force that the slide table can withstand when the workpiece's center of gravity is located at the center of the slide table, measured in N. If used beyond the load capacity, the slide table may not operate smoothly or may become stuck.
When installing the linear motion slide table vertically or upside down, the accuracy may be less than the values indicated in the product catalog. Please take note.

Code	H	D	L	R
Spec.	Side reinforcement locking (double-sided)	Handwheel facing down	Handwheel facing left	Handwheel facing right

■ Installation method for lift-type manual components
 Place the entire bottom surface of the side plate of this product on a horizontal surface.
 When using the rear support bracket (as shown in Figure A below), to ensure sufficient strength for the workpiece load and torque, please make sure it is securely fixed to the horizontal surface.
 When not using the rear support bracket (as shown in Figure B below), you can use the countersunk holes of the profile or a mounting bracket for fixation. To ensure sufficient strength for the workpiece load and torque,
 please make sure it is securely fixed to the vertical surface.

Figure A

Figure B

Feature 1: The main body is made of aluminum alloy, achieving a lightweight design.
Feature 2: The shape of the worktable can be selected according to actual needs.
Feature 3: A linear guide is used as the guiding mechanism, providing high permissible torque.
Feature 4: Suitable for lifting applications, allowing simple positioning and transfer in the up and down directions.
Feature 5: With its built-in position indicator, it ensures repeatable accuracy when adjusting the up and down positions.

■ About effective stroke
  (1) There are many screw holes reserved in the manual component. If the customer adds tightening handles or mounting plates for fixing, the stroke may become shorter.
  (2) If a worktable is added, the stroke will change depending on the mounting position of the worktable.

■ Maintenance
  (1) Lithium soap-based grease is injected into the linear guide block, and it is usually necessary to add grease about once every three months.
  (2) The trapezoidal screw also needs to be regularly lubricated with grease.

■ Other
  (1) This product cannot be used in environments with strong vibration or impact.
  (2) In cases where the customer makes modifications or replaces parts themselves, such situations are not covered by the quality guarantee.
  (3) When carrying this component by hand, please do not hold or rotate the handwheel section. Also, do not forcibly rotate the handwheel section while the locking handle is engaged.