[Simplified Adjustments] X-Axis, Double Guide Rail Ball Screw Type, Heavy Load, with Dust Cover

Please follow the selection steps ~ to choose the type and parameters before placing an order.

		Part Number · Table Width	-	Frame length L	-	Handwheel type
		E-XPHQG102-L220-B

 

Part Number			Handwheel type	Travel (mm)	Load Capacity (N)		Trapezoidal Screw		Parallelism (µm)	Net Weight (kg)
Type	Table Width (mm)	Frame length L			Horizontal	Vertical	Lead Screw Shaft Diameter	Lead
E-XPHQG102	104	220	B (Folding type plastic handwheel)	120	490	117.6	18	4	150	3
		320		220						4
		370		270						4.5
		420		320						5
		470		370						5.5
E-XPHQG135	134	220		70	931	264.6	18	4		3.5
		320		170						4.5
		370		220						5
		420		270						5.5
		470		320						6
E-XPHQG170	169	220		60	1078	392	18	4		4.8
		320		160						5.8
		370		210						6.3
		420		260						6.8
		470		310						7.3
E-XPHSQG102	104	220		120	490	117.6	18	4		3.3
		320		220						4.3
		370		270						4.8
		420		320						5.3
		470		370						5.8
E-XPHSQG135	134	220		70	931	264.6	18	4		3.8
		320		170						4.8
		370		220						5.3
		420		270						5.8
		470		320						6.3
E-XPHSQG170	169	220		60	1078	392	18	4		5.3
		320		160						6.1
		370		210						6.6
		420		260						7.1
		470		310						7.6

■ Travel Distance
  The dimensions in the catalog drawings represent the state when the stroke is 0 mm. Based on this as the reference, the distance moved to the left (up) or right (down) is the travel distance. Movement to the left (up) is positive, and movement to the right (down) is negative.

■ Load capacity
  Refers to the force that the slide table can withstand when the workpiece's center of gravity is located at the center of the slide table, measured in N. If used beyond the load capacity, the slide table may not operate smoothly or may become stuck.
For the load capacity during horizontal and vertical installation, please refer to the values for "Horizontal" and "Vertical" respectively. When installing the linear motion slide table vertically or upside down, the accuracy may be less than the values indicated in the product catalog. Please take note.

(5)

Code	H	U	D	L	R
Spec.	Side reinforcement locking (double-sided)	Handwheel facing up	Handwheel facing down	Handwheel facing left	Handwheel facing right

 

■ Installation method for horizontal manual components
  Please use this product with the back of the profile placed entirely on a horizontal surface.
  To ensure sufficient overall strength to handle loads and torque, please make sure that the profile's counterbore or the mounting bracket is securely fixed.
  Do not suspend or mount the horizontal manual component on a wall.


■Utilization of frame slots
  M6 nut slots are provided on the sides and bottom. Nuts can be inserted from either the handwheel side or the opposite side, allowing bolts or parts such as adjustable feet to be secured.

■About Effective Stroke
   (1) The manual component has many reserved screw holes. If the customer adds tightening handles or mounting plates, the stroke may become shorter.
   (2) If a worktable is added, the stroke will change depending on the mounting position of the worktable.

■Maintenance
   (1) Lithium soap-based grease is injected into the linear guide block; typically, grease should be replenished about every 3 months.
   (2) The trapezoidal screw also needs to be regularly lubricated with grease.

■Other
   (1) This product cannot be used in environments with vibration or impact.
   (2) In cases where the customer makes modifications or replaces parts themselves, such situations are not covered by the quality guarantee.
   (3) When carrying this component by hand, do not hold the handwheel; do not forcibly turn the handwheel while the locking handle is engaged.