Hinges for Heavy Load (Stainless Steel), Economy series
Brand :
MISUMI
Caution
- This product is compatible with MISUMI Standard Aluminum Frames.
compatibility with Economy Series Aluminum Frames is not guaranteed.
Product Description
Only part numbers that can be generated via the filter(Configurator bar on the left) are currently available.
[ ! ] Please note that some sizes listed in the specification table are not yet available.
Part numbers generated using the configuration bar on the left side of the page are valid.
[!]Allowable load is the value when 2 pieces are used.
Only part numbers that can be generated via the filter(Configurator bar on the left) are currently available.
Part numbers generated using the configuration bar on the left side of the page are valid.
Material
 Material |  Surfacetreatment | |
| ①Hinge | SUS316 | Buffed Finish |
| ②Shaft | - |
Specifications
| Part Number |
| EA-SHHPSZ6 |
Drawing
Specification
Specifications
| Part Number |
| EA-SHHPSZ6 |
| Part Number | Allowable Load (N) | Mass (g) | L | W | P | S | C | C1 | T | N | Applicable Screws and Nuts | |||||
 Type |  No. | Through Hole | Countersink | Screws | Quantity | Nuts | Qunatity | |||||||||
| EA-SHHPSZ | 6 | 350 | 110 | 47 | 48 | 30 | 32 | 6 | 14 | 5 | 5.5 | 11 | FB5-10 (Flat Head Screw) | 4 | HNTT6-5 | 4 |
| 8 | 450 | 190 | 63 | 62 | 37 | 42 | 6 | 14 | 5 | 6.5 | 13 | FB6-12 (Flat Head Screw) | 4 | HNTT8-6 | 4 | |
| 8-45 | 450 | 190 | 63 | 80 | 43 | 47 | 8 | 16 | 6 | 6.5 | 13 | FB6-15 (Flat Head Screw) | 4 | HNTT8-6 | 4 | |
Alteration
| Code | Spec. |
| SET | Provide applicable bolts and nuts. |
Only part numbers that can be generated via the filter(Configurator bar on the left) are currently available.