Specifications

Part Number	-	L
EA-HLTS3	-	4.5

■Threaded Inserts

Part Number		* (L) After Insertion			Pitch	Free O.D. (Before Insertion / Reference Value)	Tap Pilot Hole Dia. (Reference)
Part Number
Type	*M
EA-HLTS (Coarse)	2	2	3	4	0.4	2.57～2.62	2.09～2.18
	2.2	2.2	3.3	4.4	0.45	2.80～3.00	2.30～2.39
	2.5	2.5	3.75	5	0.45	3.14～3.52	2.60～2.69
	2.6	2.6	3.9	5.2	0.45	3.24～3.62	2.70～2.79
	3	3	4.5	6	0.5	3.86～4.11	3.11〜3.20
	3.5	3.5	5.25	7	0.6	4.48～4.86	3.64～3.75
	4	4	6	8	0.7	5.17～5.42	4.16〜4.29
	5	5	7.5	10	0.8	6.36～6.62	5.18〜5.33
	6	6	9	12	1	7.47～7.98	6.22〜6.40
	8	8	12	16	1.25	9.73～10.28	8.28〜8.48
	10	10	15	20	1.5	12.07～12.63	10.33〜10.56
	12	12	18	24	1.75	14.34～14.98	12.38〜12.64
	14	14	21	28	2	16.55～17.44	14.44～14.73
	16	16	24	32	2	18.73～19.49	16.44〜16.73
	18	18	27	36	2.5	21.50～22.14	18.55～18.89

* M and L are sizes when inserted into tapped holes. L dimension before insertion is shorter than that after the insertion.

■Coil turns (Reference)

Part Number		Pitch	Coil turns
			*(L) after insertion (D = thread diameter M)
Type	*M		1D		1.5D		2D		3D
EA-HLTS (Coarse)	2	0.4	3	1	5	1	7	3	-
				4		2		4
	2.2	0.45	3	1	5	3	7	5	-
				8		8		8
	2.5	0.45	3	3	6	3	8	7	-
				4		8		8
	2.6	0.45	4		6	5	9	1	-
						8		4
	3	0.5	4		6	5	9	1	-
						8		4
	3.5	0.6	3	7	6	1	9		-
				8		2
	4	0.7	3	7	6	3	8	7	-
				8		8		8
	5	0.8	4	3	7	1	9	7	-
				8		8		8
	6	1	4	1	7	1	10		-
				4		8
	8	1.25	4	5	7	3	10	1	-
				8		8		4
	10	1.5	5		8		11		-

	12	1.75	5		8	1	11	3	-
						4		8
	14	2	5	1	8	1	11	3	-
				4		2		4
	16	2	6	1	9	7	13	1	-
				8		8		2
	18	2.5	5	5	9		12	1	-
				8				2

Only part numbers that can be generated via the filter(Configurator bar on the left) are currently available.

*M and L indicated above are sizes measured when the threaded insert is inserted into tapped holes.
Before insertion,L dimension is shorter than after the insertion.

Thread Inserts, Economy series

Caution

Product Description