BLDC High-Efficiency - Parallel & Solid Shaft Gearhead

Brand :

MISUMI

Caution

Product Description

BLDC High-Efficiency - Parallel & Solid Shaft Gearhead launched as MISUMI Economy series

Product Overview

- BLDC High Efficiency type 30-750W launched as MISUMI Economy series
【Usage】
- The BLDC is higher power (up to 1.3×) due to permanent magnet technology. The BLDC have optimized size
【Application】
- An ideal solution for space optimization and equipment miniaturization.
【Product Features】
- The device stands out with a wide speed control range (80–4000 r/min) and high stability (±0.2%), ensuring precise operation.
- Supports multi-speed settings (up to 16 levels) and torque control, including holding torque at stop.
- The design is compact and easy to install, with IP54 dust and water protection and a durable anti-corrosion coating.
- It integrates monitoring, fault detection, and digital configuration features, is easy to use, and supports control via computer or external signals.
【Specification Notice】
- In order to keep the surface temperature of the motor housing below 90℃, the round shaft motor shall be mounted on a heat sink plate (Material: Aluminum) of the following size.

30W type: 115×115mm thickness 5mm.
50W type: 300×300mm thickness 6mm.
60W type: 135×135mm thickness 5mm.
100W type: 115×115mm thickness 5mm.
120W type: 165×165mm thickness 5mm.
200W type: 200×200mm thickness 5mm.
400W type: 250×250mm thickness 6mm.
1100W type: 250×250mm thickness 6mm.

- Storage environment also includes short-term value in transit.
- IP value indicating dustproof and waterproof performance is in accordance with IEC 60529 and IEC 60034-5 regulations.
Take notice of
- Please do not conduct insulation resistance measurement and voltage withstand test when the motor is connected to the driver.
- Material and surface treatment of motor.
[Material: Housing-aluminum, output shaft-40Cr, screw-stainless steel (Exposed part only, excluding protective ground terminal)]
[Surface treatment: Housing: Coating (Excluding mounting surface)]

Motor Type	Gearhead Type	Type	Applications	Features	Output Range	Controller
BLDC - High Torque Motor	Parallel & Solid Gearhead	EA-BLD⃞-220-GK	Where space is available and high power (torque) is required.	High allowable torque and superior load capacity (e.g., 10N.m)	15W-400W	LINK	Series C41
	Parallel (L Type) & Hollow Gearhead	EA-BLD⃞-220-GKL	Where there is plenty of space, standard power, and the output shaft is constantly rotating in reverse.	Standard type with slightly lower allowable torque than K2 (e.g., 5N.m).	15W-400W
	Right Angle & Hollow Gearhead	EA-BLD⃞-220-GKR	To save installation space or want to mount directly on the axis of the device (hollow shaft).	Space-saving design; available in Hollow Shaft or Solid Shaft types.	40W-400W
BLDC - High Efficiency Motor	Parallel & Solid Gearhead	EA-BLD⃞-220-GV	General-purpose use requiring wide speed options	Parallel shaft reducer. Widest range: 5 to 360	30W-750W		Series C20 Series C40
	Parallel (L Type) & Hollow Gearhead	EA-BLD⃞-220-GS	Machinery with tight space constraints; allows perpendicular mounting.	Right-angle gearbox with hollow shaft structure. Special design with a right-angle hollow shaft helps optimize space	30W - 400W
	Right Angle & Hollow Gearhead	EA-BLD⃞-220-GSL	Heavy-duty applications demanding high power in a parallel configuration.	Parallel shaft reducer. IP20 (Standard rating, lower than S/SF).	100W-1100W
BLDC - Standard Motor	Without Gearhead	EA-BLD⃞-A	Used when speed reduction is not required (No gear head)	Only the motor body. The output shaft is either a smooth round shaft or a keyed shaft	15W-400W		Series C10 Series C20
	Parallel Gearhead	EA-BLD⃞-GN/GU	It is the most common type, used in conveyors and automation systems that require direct transmission and basic load capacity.	The motor comes with a pre-mounted square gearbox, with the output shaft parallel to the motor shaft. The GU series is typically more robust and uses bearings.	15W-1000W
	Parallel (L Type) Gearhead	EA-BLD⃞-GNL/GUL	Useful in confined spaces where a 90° transmission angle is needed to save space. The hollow shaft allows easy direct mounting onto the machine shaft.	The gearbox is designed in an L-shape, with the output shaft at a 90° angle to the motor body. It often features a hollow shaft (designation LC)	15W-750W